Sanico VIBORG M LED Solar Lantern Instructions
- June 5, 2024
- Sanico
Table of Contents
Sanico VIBORG M LED Solar Lantern
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general
applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. Mounting diagram:
see pictures. Check for proper mechanical fastening and connection to
electrical power prior to first use. Product requires preparation before
operating.
FUNCTIONAL CHARACTERISTICS
The lamp is equipped with built-in solar panels. Fixtures turns on
automatically after dark.
USAGE GUIDELINES / MAINTENANCE
Clean only with soft and dry cloths. Do not use chemical detergents. Do not
cover the product. Ensure free air access. Battery replacement: see pictures.
Product must not be used in unfavorable environment, e.g. dust, moisture,
water, vibrations, etc. Product with nonreplaceable light source of the LED
type. Product cannot be fixed if the light source becomes damaged. It’s
forbidden to use the product with damaged protective cover.
ATTENTION! Do not look directly at LED light beam. Product to be used in a moderate climate. Using the product without the shield is forbidden. Non- demountable product. Not suitable for independent repairs. The construction of the product offers no resistance to specific conditions, e.g. due to the presence of defrosting substances and salt atmosphere; oils, lubricants, solvents. Prevent flooding of the device. In case of failure, the device should be replaced with a new one. Before first use, the solar lamp must be exposed to direct sunlight for a few days in order to charge the accumulators. Make sure that the solar panel is not covered/shaded/overshadowed while installing the lamp outside in order to ensure the optimal charging of the accumulators. Keep the solar panel and the chassis of the device clean in order to ensure the optimal charging of the accumulators during the day. Clean regularly If after some time the lamp stops working, try changing the accumulators. Use protective gloves.
ENVIRONMENTAL PROTECTION
Segregation of post-packaging waste is recommended. This labelling indicates
the requirement to selectively collect waste electronic and electrical
equipment. Products labelled in this way must not be disposed of in the same
way as other waste under the threat of a fine. These products may be harmful
to the natural environment and health, and require a special form of
recycling/neutralizing. Keep your environment clean. Used batteries and/or
accumulators need to be treated as separate waste and placed in an individual
container. Used batteries and/or accumulators should be returned to a
collection facility for waste batteries/ accumulators. Information on
collection centers is provided by local authorities or sellers of such goods.
Used items can also be returned to the seller when new product is purchased,
in quantity no larger than the purchased item of the same type. The above
rules regard the EU area. In the case of other countries, regulations in force
in a given country must be applied. Contacting the distributor of our products
in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.