BE COOL BC23GSD4 Quad Garden Socket Instruction Manual

June 11, 2024
BE COOL

BE COOL - logo

Operating instructions
Operation manualBE COOL BC23GSD4 Quad Garden
Socket

Garden socket outlet 4gang
Item No.: BC23GSD4
CONGRATULATIONS!

THANK YOU FOR CHOOSING A BECOOL PRODUCT.

BC23GSD4 Quad Garden Socket

BE COOL BC23GSD4 Quad Garden Socket - qr code

Current operating instructions
Download current operating instructions via the link www.becool.at/downloads or scan the QR code shown. Follow the instructions on the website.

Scope of delivery
3. Garden socket
4. Operating instructions

Intended use

The product is a 4-outlet power strip suitable for outdoor use (IP44) and can be used to connect electrical appliances such as pond aerators, fountains, garden lighting,  etc. It is important to note that the total power of all connected devices must not exceed 3680W. It is important to read the operating instructions carefully and to keep  them and only pass the product on to third parties together with the operating instructions. Modification or alteration of the product is not permitted for safety and  approval (CE) reasons and may result in damage or danger such as short circuit, fire or electric shock. The product complies with the applicable national and European  requirements and all company and product names contained are trademarks of their respective owners. All rights reserved.

Symbol explanation

The symbol with the lightning bolt in a triangle is used when there is danger to your health, e.g. from electric shock.
The symbol with the exclamation mark in the triangle indicates important instructions in these operating instructions that must be followed.

Safety instructions

Please read the operating instructions carefully and pay particular attention to the safety instructions. If you do not follow the safety instructions and instructions for  correct handling, we accept no responsibility for damage to persons or property.
In addition, the warranty/guarantee becomes invalid in such cases.

  • Only use the appliance with a proper mains socket.
  • Make sure that the power socket is nearby and easily accessible.
  • Never pull the mains plug out of the socket by the cable, but always by the handles.
  • Unplug the appliance if it is not going to be used for a long time.
  • Always pull the plug out of the socket during a thunderstorm.
  • Make sure that the mains cable is not crushed, kinked, damaged or otherwise stressed. Avoid excessive heat or cold stress on the cable. Do not modify the power cord.  A damaged mains cable can cause an electric shock.
  • Do not use the product if the power cord is damaged. Switch off the power socket and carefully pull out the plug.
  • Only have a damaged mains cable replaced by a qualified specialist.
  • Do not plug in or unplug the mains plug with wet hands.
  • Do not overload the product and observe the power specification in the technical data.
  • Do not use multiple sockets or plug them in one after the other as this can lead to an overload and fire hazard.
  • Do not operate the product covered, as it may overheat and catch fire.
  • The product is only deenergized when the mains plug is disconnected.
  • Do not point a jet of water at the product.
  • The product is not a toy and should be kept away from children and animals.
  • Dispose of the packaging material safely so that it does not become a dangerous toy. Protect the product from extreme temperatures, direct sunlight, strong vibrations, high humidity, moisture, flammable gases, vapors and solvents.
  • Do not subject the product to mechanical stress.
  • Remove the product from service if it shows visible damage, no longer functions properly, has been stored for a long time under unfavorable conditions or has  been subjected to considerable transport loads.
  • Handle the product carefully to avoid damage from knocks, impacts or falling.
  • Also observe the safety instructions and operating instructions of the devices to which the product is connected.
  • Consult a professional if you have any questions or are unsure how to use the product.

Installation site

  • Do not place the product in a recess or depression as water may remain there.
  • Instead, choose a firm, level and horizontal place from which the rainwater can run off without getting inside the enclosure.

Commissioning

  • Connect the mains plug to a suitable socket.
  • Connect the devices you want to connect to the sockets. Make sure that the cables are properly routed through the openings provided and are not pinched when you close the housing.
  • Switch on the connected units.

Cleaning and care

  • The product does not require user maintenance and should not be opened or disassembled. Repairs may only be carried out by a qualified specialist or workshop.
  • Do not use aggressive cleaning agents or chemicals, as this may damage the housing or impair its operation.
  • Avoid cleaning the product with water jets such as from a high-pressure cleaner.
  • Before any cleaning, disconnect the product from the power supply and from any connected device.
  • Use a slightly damp cloth to clean the housing and a few drops of mild washing-up liquid for heavier soiling.

Recycling, disposal, declaration of conformity

| RECYCLING
The packaging materials can be recycled. Therefore, it is recommended to dispose of them in sorted waste.
---|---
| DISPOSAL
The symbol “crossed-out dustbin” requires the separate disposal of waste electrical and electronic equipment  (WEEE).Electrical and electronic equipment may contain hazardous and environmentally dangerous substances. Therefore,  do not dispose of this in unsorted residual waste, but at a designated collection point for waste electrical and  electronicequipment. By doing so, you will contribute to the protection of resources and the environment. For more information,
please contact your dealer or local authorities. Directive 2012/19/EU
| DECLARATION OF CONFORMITY
We hereby confirm that this article complies with the basic requirements, regulations and directives of the EU. You can view  the detailed declaration of conformity at any time under the following link: https://www.schuss- home.at/downloads

Technical data

Rated voltage 230 V/AC, 50 Hz
Connected load/current Max. 3680 W / 16 A
Protection class IP44
Cable type H07RN-F 3G 1.5 mm²
Operating conditions -25 to +40 ºC, <95 % rH
Storage conditions -25 to +40 ºC, <95 % rH
Cable length 5 m
Dimensions (W x H x D) 200 x 215 x 200 mm
Weight 4,2 kg

GUARANTEE

With this quality product from BE COOL, you have made a decision for innovation, durability and reliability.
For this BE COOL appliance we grant a warranty period of 2 years from the date of purchase valid in Austria!
If, contrary to expectations, service work should nevertheless be necessary on your device during this period, we hereby guarantee to repair the device free of charge  (spare parts and labor) or (at the discretion of Schuss) to exchange the product. Should neither repair nor exchange be possible for economic reasons, we reserve the  right to issue a current value credit note.

This warranty does not cover:

  • In case of improper use, we do not assume any consequential damage, repair or replacement of parts due to normal wear and tear.
  • Damage due to non-observance of the operating instructions
  • Devices that are used – even only partially – for commercial purposes
  • equipment mechanically damaged by external influence (fall, impact, breakage, improper use, etc.) as well as wear and tear of an aesthetic nature.
  • Equipment that has been improperly handled
  • Units that have not been opened by our authorized service workshop.
  • Consumer expectations not met.
  • Damage caused by force majeure, water, lightning, overvoltage.
  • Units where the type designation and/or serial number on the unit has been changed, deleted, made illegible or removed.
  • services outside our authorized workshops, the transport costs to

An authorized workshop or to us and back, as well as the associated Risks.
Please note that the direct costs of returning the goods to the service center are to be borne by the consumer.
The provision of warranty service (repair or replacement of the appliance) does not extend the absolute warranty period of 2 years from the date of purchase.
The 2-year warranty is only valid on presentation of the purchase receipt (must contain the name and address of the dealer as well as the complete designation of the  unit) and the corresponding warranty certificate, on which the type of unit as well as the serial number (visible on the box and on the back or bottom of the unit) must  be noted! Without the guarantee certificate, only the legal guarantee applies!
We expressly point out that the statutory warranty rights are not affected by this guarantee and continue undiminished.
Schuss Home Electronic GmbH and its vicarious agents shall only be liable for damages in the event of gross negligence or intent. Liability for loss of profit, expected  but not realized savings, consequential damage and damage from third party claims is excluded in any case. Damages to or for recorded data are always excluded from the liability for damages.

Congratulations on your choice. We hope you enjoy your BE COOL appliance!

BE COOL - logoBe Cool Distribution
Schuss Home Electronic GMBH
A-1140 Vienna, Scheringgasse 3
Tel.: +43 (0)1/970 21
Type designation:……..
Serial number:……
In the event of a warranty claim, this warranty certificate must be
handed over together with the unit to the
authorized service workshop or the dealer from whom you purchased the unit!

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals