PowerA XBOX Charging Stand User Manual
- June 11, 2024
- PowerA
Table of Contents
CHARGING
STAND
USER MANUAL
XBOX Charging Stand
CONTENTS
- Single Charging Stand
- (1) 1100 mAh Ni-MH Battery Charge-thru Battery Doors: (1) ‘A’ for Xbox One and (1) ‘B’ for Xbox Series X|S
- User Manual
USE
- Install the Ni-MH battery into the battery compartment of your Xbox Wireless Controller.
- Attach the correct charge-thru battery door to the back of the Xbox Wireless Controller after checking underside of door: ‘A’ for Xbox One and ‘B’ for Xbox Series X|S.
- Plug the USB cable into the Xbox Console.
- Place your Xbox Wireless Controller on the Charging Stand.
- Check LED color for charge status: amber while charging and white once fully charged.
NOTE: For battery charge level, check Xbox onscreen display.
CHARGING
Always connect the Charging Stand directly to your Xbox console. Do not use any other means for charging.
BATTERY LEAKAGE WARNING
-
Leakage of chemicals contained within the battery pack can cause personal injury as well as damage to game controller.
-
Avoid allowing battery chemicals to contact skin.
If contact occurs, immediately wash thoroughly with soap and water. -
If liquid leaking from a battery pack comes into ontact with your eyes, DO NOT RUB EYES!
Immediately flush eyes thoroughly with clean running water and seek medical attention to prevent injury to eyes.
BATTERY WARNING
- Do not attempt to repair the Ni-MH battery yourself—you may damage the battery, which could cause overheating, fire, and injury.
- The NI-MH battery in your device should be serviced or recycled by PowerA or an authorized provider and must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines.
- Do not use or leave a device containing rechargeable batteries in a high-temperature environment (e.g., in strong direct sunlight, or in a vehicle in hot weather). High temperatures may cause batteries to overheat or catch fire, and the battery performance or longevity may be negatively affected.
- Do not use a device containing rechargeable batteries in an environment with high levels of static electricity. Excessive static electricity can impair the batteries’ internal safety measures, increasing the risk of overheating or fire.
- If the battery gives off an odor, generates heat, or in any way appears abnormal during use, recharging or storage, immediately remove it from any charging device and lace it in a sealed fireproof container such as a metal box, or in a safe location away from people and flammable items.
- Discarded batteries may cause fire. Do not heat the controller or battery, or place either in or near fire.
TROUBLESHOOTING
For current FAQs, visit PowerA.com/Support
Q: What if my Charging Stand isn’t working?
A: Confirm you properly installed the included 1100 mAh Ni-MH battery and
charge-thru battery door.Confirm the Charging Stand is properly connectedto
the Xbox console via the USB cable. Confirm the controller is properly placed
on the Charging Stand.
CHARGING STAND
| INPUT VOLTAGE (X, V) | 5 V MAX |
|---|---|
| INPUT CURRENT (X.X, A) | 0.5 A MAX |
| OUTPUT VOLTAGE (X.X, V) | 5 V MAX |
| OUTPUT CURRENT (X.X, A) | 0.5 A MAX |
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules.
CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
MANUFACTURED FOR
ACCO Brands USA LLC
4 Corporate Drive, Lake Zurich, IL 60047
ACCOBRANDS.com | POWERA.com
MADE IN CHINA
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please visit
PowerA.com/Support.
WARRANTY
2-Year Limited Warranty: Visit PowerA.com/Support
for details.
WARRANTY AGAINST DEFECTS, AUSTRALIA AND NEW ZEALAND CUSTOMERS
This product is provided with a 2-year warranty against defects in
manufacturing or materials from the date of purchase. ACCO Brands will either
repair or replace a faulty or defective product subject to the conditions of
this warranty. Claims under this warranty must be made to the place of
purchase within the warranty period with proof of purchase by the original
purchaser only. Expenses associated with a warranty claim are the
responsibility of the consumer. Conditions of this warranty are on our
website: PowerA.com/warranty-ANZ This
warranty is provided in addition to other rights or remedies available to you
under the law. Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
DISTRIBUTOR CONTACT DETAILS AUSTRALIAN CUSTOMERS
ACCO Brands Australia Pty Ltd
Locked Bag 50, Blacktown BC, NSW 2148
Phone: 1300 278 546
Email: consumer.support@powera.com
NEW ZEALAND CUSTOMERS
ACCO Brands New Zealand Limited
PO Box 11-677, Ellerslie, Auckland 1542
Phone: 0800 800 526
Email: consumer.support@powera.com
ADDITIONAL LEGAL
© 2023 ACCO Brands. All Rights Reserved. PowerA and PowerA Logo are trademarks of ACCO Brands. Nintendo Switch is a trademark of Nintendo. Licensed by Nintendo.
REGIONAL COMPLIANCE SYMBOLS
More information available via web-search of each symbol name.
Waste Electrical and Electronic Equipment (WEEE): Electrical and electronic
devices and batteries contain materials and substances that can have damaging
effects on human health and the environment. This symbol indicates that this
device and the battery must not be treated as household waste and must be
collected separately. Dispose of the device via a collection point for the
recycling of waste electrical and electronic equipment within the EU, UK and
in other European countries that operate separate collection systems for waste
electrical and electronic equipment and batteries. By disposing of the device
and the battery in the proper manner, you help to avoid possible hazards for
the environment and public health that could otherwise be caused by improper
treatment of waste equipment. The recycling of materials contributes to the
conservation of natural resources.
Conformit Europene aka European Conformity (CE): A declaration from the
manufacturer that the product meets applicable European irectives and
Regulations for health, safety, and environmental protection.
UK Conformity Assessment (UKCA): A declaration from the manufacturer
that the product meets applicable UK Regulations for health, safety, and
environmental protection.
**** The RCM (Regulatory Compliance Mark) indicates that the product complies
with the relevant Australian and New Zealand electrical safety,
electromagnetic compatibility (EMC) and related requirements.
Customer Service
Service client
PowerA.com/Support