kogan KASMDBLATBA SmarterHome Security Camera Doorbell 3 Pro User Guide

KASMDBLATBA Smarter Home

Security Camera Doorbell 3 Pro
User Guide

COMPONENTS

OVERVIEW

Doorbell

INSTALLATION

Mounting the Doorbell

1. Remove the mounting screw from the bottom of the doorbell with the screwdriver.
2. Separate the doorbell from the mounting bracket.
3. Attach the bracket to the wall using the supplied screws.
4. Replace the doorbell back onto the bracket and secure it with the previously removed mounting screw.
   Note: Depending on the type of wall you are securing to, you may need to use the included wall anchors as well. If you’re unsure as to what hardware suits your requirements, please seek advice from a qualified trade professional.

CONNECT TO SMARTERHOME™ APP

Install App
Download the “Kogan Smarter Home” app from the Play Store (Android) or App Store (iOS).

https://apps.apple.com/au/app/kogan-smarter-home/id1394930704
https://play.google.com/store/apps/details?id=com.kogan.smarterhome

To register:

1. If you already have a Smarter Home account, select ‘Log In’. To register a new account, select ‘Sign Up’.
2. The system will automatically recognize your country. If needed, you can manually select your country from the drop-down box. Enter your email address and tap ‘Get  Verification Code’ to continue.
3. A 6-digit code will be sent to the submitted email address. Enter this code before the one-minute timer expires.
4. Continue to the next page and complete your Smarter Home profile.

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (indicator is rapidly flashing BLUE).
If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and hold the reset button for 5 seconds until the indicator is rapidly flashing BLUE.

Add device through network

1. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper right corner, to add a new device through the network.
2. Select the product type from the list of options in the app Home Security > Door Bells).
3. Enter your Wi-Fi details. It is important that your Smarter Home™ device and the app are connected to the same Wi-Fi network during setup.

Notes:

• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
• Depending on the product, Steps 3 and 4 may be in opposite order.

4. Ensure that the device is in pairing mode, with the indicator rapidly flashing BLUE, and tap “Next”.
5. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the Smarter Home™ device are kept close until  connection is complete.
6. After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.

Note:
Once connected, you can select Create Scene from the “+” in the upper right corner (or from the Scene tab) to group connected Smarter Home™ products and automate their functions.

GOOGLE HOME CONTROL

Note:
You will need to have set up a Google Home account prior to linking your Kogan Smarter Home™ device.

Adding “SmarterHome” to the Google Home app

1. From the home page of the Google Home app, select the “+” icon (top left corner, see arrow in the below screenshot) to access the ‘Add and manage’ page.
2. Select ‘Set up device’, then select the ‘Works with Google’ option.
3. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
4. From here, you will be prompted to sign into your Smarter Home™ account using either your email or mobile phone number, depending on which method you used to  register your account.
5. Select “Kogan Smarter Home™” from the app options.
6. Tap ‘Authorise’ to grant Google permission to access the Smarter Home™ app and your devices.
7. Once connected, the app will display any compatible devices linked to your Smarter Home™ account. From here you can assign them to rooms and set up any routines. Tap on any of the devices to view a list of available commands.

Note:
Please note that Google Home can only control the base/core functions of any compatible Smarter Home™ devices. To make full use of this product’s smart functionality, please use the Kogan Smarter Home™ app.

AMAZON ALEXA CONTROL

Note:
You will need to have set up an Alexa account prior to linking your Kogan Smarter Home™ device.

Adding “SmarterHome” to the Alexa app

1. From the home page of the Alexa app, select the “ ” icon in the bottom-right and select “Skills & Games” from the sidebar.
2. Select the search bar and type ‘Smarter Home’ to locate the Kogan Smarter Home™ skill.
3. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
4. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to  register your account.
5. Select “Kogan SmarterHome™” from the app options.
6. Tap ‘Authorize’ to grant Alexa permission to access the SmarterHome™ app and your devices.
7. Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account. When your devices have successfully connected to the  Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands.

Note:
Please note that Alexa can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.

PAIRING CHIME WITH DOORBELL

Note:
The Doorbell and Chime have been paired together from the factory. If they are not paired, the following steps will help you pair them.

1. Attach the Chime to the power adapter.
2. Press the Reset button on the Chime, the indicator will begin flashing BLUE. The Chime is now pairing mode (searching for connection).
3. In the SmarterHome app open the doorbell settings by tapping the “…” button in the upper right corner.
4. Tap “Bell Settings”.
5. Tap the “Bind” button, the chime will connect to the doorbell. The indicator light on the chime will turn solid BLUE if successfully paired.
6. Select the ringtone and volume settings, exit back to the Preview screen to complete the process.

Notes:
If the configuration fails, please press the “RESET” button for 5 seconds to reset your chime and click the “RESET” button, then add it again.

OPERATION

Two-way audio
When the visitor pushes the doorbell button, you will get a call. You can see and hear the visitor in your App from the doorbell if you answer.

Motion detection
Motion sensors will notify you when movement is detected.

Shared device
The doorbell can be shared with friends and friends so they can access the camera’s feed.
There is no limit to the number of sharing devices, but only 6 accounts are supported for online preview at the same time.

Record
Record every moment by using high-capacity SD card storage.

Day & Night
Powerful night vision means no interruptions, even in complete darkness.

SPECIFICATIONS

Doorbell

Power Port| DC 5V/1A of charging: battery (4800mAh)
Doorbell button| Press the button to activate the doorbell
Status light| Solid RED: Network is disabled
Rapidly flashing RED: Wait for network connection
Slowly flashing RED: Connecting the network
Solid BLUE: Camera is working correctly
Microphone| Capture sound for your video
SD card slot| Support local SD Card storage (Max.128G)
Reset| Press and hold on for 5 seconds to reset
Chime
Mini USB| DC5V±10%. USB power supply
Reset| Press the RESET for 5s to restore Factory Settings. Click the RESET button to pair the doorbell
Status light| Flashing BLUE: Waiting for configuration.
Solid BLUE: Configuration completed

TROUBLESHOOTING

While connecting to the Kogan SmarterHome app, it never successfully reaches 100% and connects.| This doorbell only supports 2.4GHz Wi-Fi router, ensure you are using a 2.4GHz Wi-Fi router and confirm the WiFi password again. 5.0GHz connections will not connect.
Multiple repeated attempts to connect.| After a failed attempt to connect. you may need to restart the device or power off and then try to add again.
After connecting, the device does not appear online, or cannot be accessed in the app.| Check whether the network is normal, you can place the camera close to the router and if not, it is recommended to reset the device and add it again.
Unable to reconnect with a new router.| First remove and reset the device on the Smarter Home TM app and then configure the device again within the app.
Device still in the list of
devices after resetting?| The reset device only resets the network configuration of the camera, but cannot change the configuration on the app. Deleted the doorbell the app.
App not displaying smart phone notifications.| Ensure that app is running in the background and that notifications have been activated.
Doorbell not recognizing the SD card.| It is recommended to remove and re- insert an SD card after a power cut. Confirm whether the SD card is normally available (try reading it on another device) and that the format is FAT32.

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>