AUTEL IKEYVW003AL Universal Smart Key User Manual
- June 11, 2024
- AUTEL
Table of Contents
- AUTEL IKEYVW003AL Universal Smart Key
- Product Information
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- Product Usage Instructions
- Product Overview
- Specifications
- Key Function
- Pairing Method
- Compliance Information
- Trademarks
- For Services and Support
- General Introduction
- Pairing Method
- Compliance Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AUTEL IKEYVW003AL Universal Smart Key
Product Information
Trademarks
The product is manufactured and trademarked by Autel.
Copyright Information
The user manual is the copyrighted property of Autel. No part of the manual can be reproduced, stored, or transmitted in any form or by any means without prior written permission from Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications, and illustrations provided in the manual are based on the latest information available at thetime of printing. Autel reserves the right to make changes withoutnotice. While the information in this manual has been carefully checked for accuracy, no guarantee is provided for the completenessand correctness of the contents. Autel will not be liable for any direct damages, special, incidental, or indirect damages, or economic consequential damages.
Product Usage Instructions
General Introd$uction
The Autel universal smart key IKEY is a dual-band (315/434 MHz) product
that supports car-finding within 40 meters. The product has various models to
meet customer needs.
Product Overview
| No. | Model | Appearance |
|---|---|---|
| 1 | *,&:78- | N/A |
Specifications
| Item | Description |
|---|---|
| Product Name | Universal Smart Key |
| Model Battery | *,&:78- 0, 200mAh, 3V Li-MnO button cell |
Key Function
The product has three key functions:
- Unlock key: Unlock the vehicle
- Trunk key: Open the trunk
- Car lock key: Lock the vehicle after parking to prevent theft
Pairing Method
To pair a new key with a car, a vehicle detection computer is required. The detection computer can be purchased from a third-party decoder online or from a car repair shop or adaptation. After the vehicle detection computer is inserted into the onboard diagnostic system, take the original car key to adjust the vehicle to the open state. Once the detection computer and onboard diagnostic system are successfully matched, insert the matching key into the keyhole. If the matching is successful, the indicator light on the key decoder should light up immediately. Operate the unlock button on the original remote control, then click the unlock button on the new remote control and wait for about ten seconds to complete the key pairing.
Compliance Information
The device complies with all applicable regulations and meets general exposure requirements. The device can be used in portable exposure conditions without restriction.
For Services and Support
- pro.autel.com
- www.autel.com
- 1-855-288-3587/1-855-AUTELUS (North America)
- 0086-755-86147779 (China)
- support@autel.com
For technical assistance in all other markets, please contact your local distributor.
Trademarks
Autel®, MaxiCOM®, MaxiDAS®, MaxiScan®, MaxiTPMS®, MaxiRecorder®, and MaxiCheck® are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission of
Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on
the latest information available at the time of printing. Autel reserves the
right to make changes at any time without notice. While information of this
manual has been carefully checked for accuracy, no guarantee is given for the
completeness and correctness of the contents, including but not limited to the
product specifications, functions, and illustrations. Autel will not be liable
for any direct damages or for any special, incidental, or indirect damages or
for any economic consequential damages (including the loss of profits).
IMPORTANT : Before operating or maintaining this unit, please read this manual carefully, paying extra attention to the safety warnings and precautions.
For Services and Support
pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North
America)
0086-755-86147779 (China)
support@autel.com
For technical assistance in all other markets, please contact your local
distributor.
General Introduction
The Autel universal smart key IKEY is a dual-band (315/434 MHz) product that supports car-finding within 40 meters and comes with various models to meet customers’ needs.
Product Overview
No.
| ****
Model
| Appearance
---|---|---
1
| ****
IKEYVW003AL
| ****
Specifications
Item| ****
Description
---|---
Product Name| Universal Smart Key
Model| ****
IKEYVW003AL
Battery
| Type: CR2032
220 mAh, 3 V Li-MnO2 button cell
Key Function
- Unlock key : Unlock the vehicle,
- Trunk key : open the trunk,
- Car lock key : lock the vehicle after parking to prevent theft,
Pairing Method
- Matching a new key, especially a key with a chip, requires a vehicle detection computer to assist in pairing. The vehicle detection computer can purchase a third-party decoder online or a car repair shop for adaptation;
- After the vehicle detection computer is inserted into the OBD on-board diagnostic system socket, take the original car key to adjust the vehicle to the power-on state of the vehicle, and the indicator light should flash after the detection computer and the OBD on-board diagnostic system are successfully matched;
- Insert the matching key into the key hole. If the matching is successful, the indicator light Of the key decoder will flash. You should immediately operate the unlock button on the original remote control, then click the unlock button on the new remote control, and wait for about ten seconds to complete the key pairing.
Compliance Information
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject tc
the following two conditions:
- (1 )This device may not cause harmful interference, and
- (2)This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Statement
This device contains licence -exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- (1) This device may not cause interference.
- (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>