NEBO PINNACLE 1600 Power Station User Guide

NEBO PINNACLE 1600 Power Station

INSIDE THE BOX

1. LCD Display
2. Power ON/OFF Button*
3. Mode Button**
4. LED Light ON/OFF ButtonUSB ON/OFF Button
5. DC ON/OFF Button
6. 12V DC Output Ports
7. 12V DC Output Socket
8. USB-A Output Ports
9. USB-C Output Ports
10. 120V AC Outputs (×4)|
11. Solar/Anderson Input
12. AC ON/OFF Button
13. Overload Protection Reset Button
14. AC Input
15. Ground Port
16. LED Light
17. Wireless Output
18. AC Power Cord
19. 12V DC to Anderson Cable

SPECIFICATIONS

• Battery Capacity: 1228.8Wh, 24000mAh, 51.2V
• AC Input....: .100-120V, 10A, 1200W Max
• Solar/Anderson Input.. : ……12-75V, 25A, 800W Max
• AC Output (x4). …: 120V, 1600W, 3200W Surge
• DC (5521) Outputs …: 12V/10A 120W Max
• DC Output Socket …: 12V, 10A
• USB-A1, USB-A2 Outputs..: ….OC 18W
• USB-C1, USB-C2 Outputs….: PD 100W
• Wireless Output. ………….10W
• LED Lighting Output : .5W Max
• Dimensions. …: 16.9 x 11.8 x 11.3 inches
• Weight.. ……………44.42 Ibs (20.15 kg)
• Charge Temperature ….32ºF – 104ºF (0°C – 40°C)
• Discharge Temperature...14°F – 104°F (-10°C – 40°C)

SAFETY PRECAUTIONS / MOVING AND STORAGE INSTRUCTIONS

• Read all instructions before using the product.

• When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire, or explosion, causing personal injury or damage to other devices.

• Misusing or incorrectly connecting your NEBO Pinnacle 1600 may cause electric shock to users and damage equipment.

• Keep your NEBO Pinnacle 1600 dry and away from moisture and corrosive materials. The NEBO Pinnacle 1600 should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools, or basements.

• Do not expose your NEBO Pinnacle 1600 to moisture, water, rain, or snow.

• Keep your NEBO Pinnacle 1600 away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that produce heat.

• The lithium-ion rechargeable battery used in this charging device may present a risk of fire or chemical burn if mistreated. Do not be exposed to fire or excessive temperature. Do not expose to heat above 212°F (100°C) or incinerate.

• In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher.

• Your NEBO Pinnacle 1600 may become warm under extended high-power operation. Do not cover, wrap, or otherwise restrict the NEBO Pinnacle 1600 during operation.

• Do not disassemble your NEBO Pinnacle 1600. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazards.

• Do not drop or subject to strong impacts. Do not operate your NEBO Pinnacle 1600 if it has received a sharp blow, or has otherwise been damaged in any way.

• Do not puncture, crush or subject to mechanical shock.

• Only charge your NEBO Pinnacle 1600 by the specified method with the specified charging cords provided with the unit.

• The NEBO Pinnacle 1600, along with its accessories, are not toys and should be kept away from children.

• Do not insert any foreign object into the ports or openings of your NEBO Pinnacle 1600.

• To clean your NEBO Pinnacle 1600, wipe the case with a soft cloth. Do not use harsh chemicals, soaps, or detergents.

• Make sure the NEBO Pinnacle 1600’s charging ports do not become contaminated with lint or other debris.
  Use a canned-air type of product periodically to ensure that the port openings are clear.

• Batteries should be recycled or disposed of as per state and local guidelines.

QUICK START GUIDE

Scan the QR code below to access the online owner’s manual.
For product information and videos, visit NEBOpower.com.

IMPORTANT: Fully charge your NEBU Pinnacle™ 1600 before using it for the first time.

BATTERY MAINTENANCE: When not used, the Pinnacle 1600 power station should be stored in a cool, dry place. However, we recommend every 3 months to recharge for 2 hours. During this maintenance, the fans may turn on and the unit may get warm. This behavior is normal. If this occurs, leave the unit plugged in until fan activity stops. This charging cycle will help prolong battery life and maintain peak performance.

ACTIVATE YOUR WARRANTY TODAY: Your NEBO Pinnacle 1600 has a two-year warranty from the date of purchase. By registering your warranty, you will help protect your investment and save a record of vour purchase with our customer service team.

CHARGING YOUR NEBO PINNACLE™ 1600

CHARGING YOUR PINNACLE 1600 AT HOME

1. Connect the AC Charging Power Cord (included) to the Pinnacle 1600 AC input port. Plug the other end into a AC wall outlet. Charging will begin automatically. Press the “MODE” button to switch between fast charge at 1200 watts or reduced power at 300 watts.
   Use reduced power if your AC outlet is being shared.

2. When fully charged, the input watts will display O, and the Digital
   The display will indicate 100%. (Full charge could take up to 2 hours)

3. Disconnect the cable and power of your Pinnacle 1600.

CHARGING PINNACLE 1600 IN YOUR VEHICLE

1. Plug the 12V DC Power Cord (included) into the Solar/Anderson input port. Plug the other end into the vehicle’s DC output (cigarette lighter). Charging will begin automatically.
2. When fully charged, the input watts will display 0 and the Digital Display will indicate 100%. (Full charge could take up to 20 hours)
3. Disconnect the cable and power of your Pinnacle 1600.

CHARGING WITH A SOLAR PANEL (Sold Separately):

1. Connect the DC5525 to the Anderson cable that came with your solar panel into the Solar/Anderson input port.
2. When fully charged, the input watts will display 0 and the Digital Display will indicate 100%. (Full charge could take up to 9 hours*)
3. Disconnect the cable and power of your Pinnacle 1600.

NOTE: Charging speed will vary based on a number of factors including weather,
obstructions, and solar panel angle and positioning.
Charge time was achieved using two NEBO 100W Solar Panels.
POWERING YOUR ELECTRONIC DEVICES,
EQUIPMENT AND APPLIANCES

USING THE 120V AC OUTPUT PORTS
The NEBO Pinnacle 1600 can be used to power your 120V AC electronic devices/equipment/appliances rated for 1600 watts or less.

1. Connect the AC power plug from your electronic device, equipment, or appliance to any of the four AC Output Ports.
2. Long press the POWER ON/OFF button to turn on the power station, then press the AC ON/OFF button to begin charging or powering.
3. When done, simply press the AC ON/OFF Button and remove the plug from the Pinnacle 1600.
   NOTE: The NEBO Pinnacle 1600 will provide up to 3200 watts of surge power for a short duration.

USING THE 12V DC POWER SOCKET AND 5521 OUTPUT PORTS
The NEBO Pinnacle 1600 can be used to power your 12V DC electronic devices/equipment/appliances.

1. 1. Connect your 12V compatible device/equipment/appliance into the
   Power Socket or 5521 Output Port(5).

2. 2. Long press the POWER ON/OFF button to turn on the power station,
   then press the AC ON/OFF button to begin charging or powering.

3. 3. When done, simply press the DC ON/OFF Button and remove the
   plug from the Pinnacle 1600.

USING THE USB PORTS:
The NEBO Pinnacle 1600 is compatible with any USB charging cable and is equipped with SMART CHARGE TECHNOLOGY, which allows the Pinnacle 1600 to communicate with your electronic device and provide the fastest and safest charge for that device.

1. Connect the USB cable that came with your device.
2. Plug the cable into one of the appropriate USB Output Ports (A or C).
3. Long press the power ON/OFF button to turn on the power station first.
4. Press the USB ON/OFF Button to begin charging.
5. When charged, disconnect the cable and power off your Pinnacle 1600.
   NOTE: Quickest charge speeds can be achieved using the USB-C PD (Power Delivery) 100W Output Port.

WIRELESS CHARGING

1. Place your wireless-compatible device onto the wireless charging pad.
2. Long press the POWER ON/OFF Button to begin charging.
3. When charged, power off your Pinnacle 1600.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced
   radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
   This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>