BLUETTI PV200S Solar Panel 200W User Guide

June 15, 2024
Bluetti

BLUETTI PV200S Solar Panel 200W User Guide

What is in the box

  • Solar Panel

  • MC4 Cable

  • User Manual & Warranty Card

How to use

  1. Unfold

  2. Adjust the kickstand

  3. How to use the kickstand
    Open the kickstand, adjust the angle, stabilize the panel, fold the kickstand.

    Pull out

    Unbuckle

    Buckle up

    Fix

    Buckle up

Press to fix

  1. Connect to power station

Note:
Use ONLY ONE PV200S solar panel with EB3A,EB55. Whether connected in series or parallel, make sure the total voltage of solar panels is under the power station’s input voltage limit.
Attention
Regular inspection and maintenance are required to prolong the lifespan of solar panels.

  • No fall

  • No soak

  • No bend

  • No shading

  • No scratch

Warning:
Do not use solar panels in extreme weather conditions like thunderstorms, floods, typhoons, etc. Always use solar panels within the specified temperature range (14-149°F/-10-65°C).

Technical details

PV200S

Maximum Power(Pm)| | 200W
Open circuit voltage| | 26.5V
Short circuit current| | 9.4A
Cell efficiency| | Up to 23.4%
Cell lamination| | ETFE
Cell type| | Mon crystalline silicon
Operating temperature| | 14-149°F/-10-65°C
General
Weight| | 19.4Ibs / 8.8Kg
Dimensions| Unfolded| | 90.7
24in / 2304610mm
Folded| | 24.2
241.7in / 61761045mm
Warranty
12 Months

* STC: Irradiation 1000W/m², cell temperature 25°C, atmospheric mass number AM 1.5, measurement tolerance ±3% (Pm).

Frequently asked questions

Is the solar panel waterproof

No. The solar panel is IP65 water-resistant that provides protection against water splash. Please do not leave it in the rain or water for a long time.

What will affect the final conversion efficiency of solar panels?

The actual solar panel efficiency may be affected by several factors, like weather, sun intensity, shading, panel orientation, temperature, location, dust and dirt. For example, if you live in a place without much sunlight or your panels are covered by shade, you'll get a very low output or none at all.

Is the BLUETTI's solar panel compatible with the third party's power

station?

Yes. Make sure BLUETTI solar panels' voltage is compatible with your power stations' voltage limit, while you're using the same connector. Please feel free to contact us for compatibility with other power stations.


Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals