Anolis Eminere Cables and Connectors Instruction Manual
- June 11, 2024
- ANOLiS
Table of Contents
Anolis Eminere Cables and Connectors
Product Information
Eminere Cables and Connectors are designed and manufactured by ROBE Lighting
s.r.o for use in lighting applications. The product comes with a set of
installation instructions that must be followed carefully to ensure safe and
correct usage.
The Eminere Cables and Connectors come in different types, including power
cables, jumper cables, and waterproof caps. The product is designed for easy
installation and use in both indoor and outdoor lighting applications.
The connectors come with a seal with an inner diameter of 14.5mm and 10mm,
suitable for cables with a diameter of 10-14.5mm and 8-10mm, respectively. The
product also comes with a clamp ring, sealing nut, and cable binder to ensure
secure connections.
Product Usage Instructions
- Align the arrow symbol on the connector and mate it with the cable. Do NOT rotate the connector during connection. You will hear a silent “click” sound when the connection is correct.
- To unlock, rotate the nut anti-clockwise by 30 degrees, same as the arrow direction. Do not rotate clockwise during the unmating process.
- To assemble the field-installable connector, dismantle the connector and slide its parts onto the cable. Use the appropriate seal for your cable diameter.
- Remove insulation from the cable and individual wires, then fasten three terminals on data wires according to the US or EU color code provided.
- Put the parts of the connector on the cable and connect wires to the connector. First, connect power wires (L, N, Earth), then data wires (D+, D-, 0V). Avoid excessive torsion of data wires.
- Tighten the three data wires (D+, D-, 0V) using the cable binder. Screw the clamp ring to the connector, insert the seal to the clamp ring, and tighten the sealing nut enough. Do not twist the cable during these steps.
- Repeat steps 3-6 to assemble the connector on the second end of the cable.
- Do not bend the cable near the connector. The minimum distance for bending is 50mm.
CONNECTION OF CABLE AND PANEL CONNECTORS LOCK
LOCK
Same instalation for Power cable, Jumper cable and Waterproof cap.
- Please align the arrow symbol and mate the connector. Do NOT rotate the connector. Correct connection should be signalized by silent „click“ sound
- Mating complete.
UNLOCK
- Rotate NUT 30 degrees anti-clockwise, same as the arrow direction. (Please do not rotate clockwise during unmating process)
- Drop out.
ASSEMBLING OF FIELD INSTALLABLE CONNECTOR
- Dismantle the connector and slide its parts onto the cable (6).
- Use the seal with inner diameter of 14.5 mm for the Anolis cable
- The seal with inner diameter of 14.5 mm serves for cable of diameter 10-14.5mm.
- The seal with inner diameter of 10 mm serves for cable of diameter 8-10mm.
- Remove insulation from the cable (5) and from individual wires and fasten three terminals on data wires
- US color code shown
- Put parts of the connector on the cable (5) and connect wires to the connector. First connect power wires (L,N, Earth) and after that data wires (D+, D-, 0V). Avoid excessive torsion of data wires
- US color code shown
- MALE
- FEMALE
- EU color code shown
- MALE
- FEMALE
- After connecting wires to the connector, tighten the three data wires (D+,D-, 0V) by means of the cable binder (6).
- Screw the clamp ring (2) to the connector (1), insert the seal (3) to the clamp ring (2) and tighten the sealing nut (4) enough. During the steps DO NOT TWIST the cable (5).
- Use the same procedure to assemble the connector on the second end of the cable.
Do not bend the cable near to the connector, the minimum distance for bending is 50mm.
ROBE lighting s. r. o.
Palackeho 416
757 01 Valasske Mezirici
Czech Republic
Tel.: +420 571 751 500
E-mail : info@anolis.eu
www.anolislighting.com
VERSION 2.0 / 2_2023
QR code for Installations Instructions
Documents / Resources
|
Anolis Eminere Cables and
Connectors
[pdf] Instruction Manual
Eminere Cables and Connectors, Cables and Connectors, Connectors
---|---
|
Anolis Eminere Cables and
Connectors
[pdf] Installation Guide
Eminere Cables and Connectors, Eminere, Cables and Connectors, Connectors
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>