INOGENI SHARE2U USB Camera Mixer User Manual

June 4, 2024
INOGENI

SHARE2U USB Camera Mixer
User Manual

How it works?

 The INOGENI REMOTE is a device that can control the mixing function of SHARE2/SHARE2U and the switching function of CAM-300 devices. You just need to apply the correct wiring between the REMOTE and the INOGENI device. You will then be able to communicate with the device using the push buttons at the top of the device.

Connectivity

For SHARE2
Use a simple RJ45 cable

INOGENI SHARE2U USB Camera Mixer - Fig

Do not plug the cable into the LAN connection of the SHARE2. Plug it into the RS232 port.
For SHARE2U and CAM-300
Use a RJ45 cable to a terminal block plug. 

INOGENI SHARE2U USB Camera Mixer - Fig 2

Do not plug an RJ45 cable between the SHARE 2U or CAM300 device and the REMOTE.
INOGENI device side

INOGENI SHARE2U USB Camera Mixer - Fig 3

Pin 1: Receive
Pin 2: GND
Pin 3: Transmit
Pin 4: 5V supply
REMOTE side

Regarding +5V supply for REMOTE:
Under SHARE2/SHARE2U and CAM300, make sure to put switch number 6 to the ON position.

Technical support

If you need any support on how to operate this device, contact us at support@inogeni.com for further assistance.
Contact us
Come visit us if you have special needs or requirements. We are your specialists for custom USB 3.0, HDMI, and SDI professional products tailored to your needs.
INOGENI, Inc.
979 Ave de Bourgogne Suite 530
G1W 2L4 (QC) Canada
© Copyright 2022. INOGENI, Inc. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals