Leica Geovid Pro Binoculars User Guide

June 11, 2024
Leica

Leica Geovid Pro Binoculars

Leica-Geovid-Pro-Binoculars-PRODUCT

FOREWORD

Dear Customer,
we wish you a great deal of enjoyment and every success with your new Leica product. Please read the long form manual before using the product for the first time. Knowledge of the content will prevent inadvertent damage to the product, possible injuries and other risks. You can download the long form manual here:
https://en.leica-camera.com/Service-Support/Sup-port/Downloads

REPLACEMENT PARTS/ ACCESSORIES

Contact Leica Customer Care or your specialist Leica retailer for details on the latest replacement parts/accessory range: en.leica- camera.com/Contact
Please read the chapters “Safety Remarks” and “Important Information” before using the prod-uct for the first time. Knowledge of the content will prevent inadvertent damage to the product, possible injuries and other risks.

LEGAL INFORMATION

CE MARK
The CE mark on our products documents compliance with the fundamental requirements of applicable EU guidelines.

Declaration of Conformity (DoC)

Hereby, “Leica Camera AG” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Customers can download a copy of the original DoC to our Radio Equip- ment products from our DoC server:

www.cert.leica-camera.com

Please contact Leica Camera AG, Am Leitz-Park 5, 35578 Wetzlar,

Germany in case of any further questions

Depending on product (see technical data)


 | Type| Frequency band (center

frequency)

| Maximum output

(dBm E.I.R.P.)

 | Bluetooth ® Wireless Technology| 2402–2480 MHz| 10
 |  |  |

TECHNICAL DATA (LASER)

Laser class IEC/EN Class 1
Wavelength (nm) 900
Pulse duration (ns) 57
Output (mW) 1.6
Beam divergence (mrad) Vertical: 0.8

Horizontal: 1.8

CLASS 1 LASER PRODUCT

Conforms to 21 CFR 1040.10 and 1040.11 except for conformance to IEC 60825-1 Ed. 3 as described in Laser Notice No. 56, May 8, 2019.

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
(Applies within the EU and for other European countries with active waste separation policies.)

This device contains electric and/or electronic com-ponents which must not be disposed of in general household waste. Instead, it should be disposed of at a recycling collection point provided by your local authority. This service is free of charge. Any standard or rechargeable batteries used in this device must be removed and disposed of separately in accordance with local regulations. Please contact your local authorities, waste disposal collection point or the re-tailer, from whom you purchased the device for more information on correct waste disposal.

REGULATORY INFORMATION
You will find the manufacturing date of your product on the stickers on the packaging. The date format is year/month/day.

SAFETY REMARKS

WARNING
Non-compliance with the following points may result in serious injury or death.

LASER

  • The use of any operations not described in this manual or any alterations on the device may result in hazardous radiation exposure.
  • The laser device is active and emitting an invisible laser beam as long as the display in the eyepiece is active. Never point the laser focusing optics at a person or animal.
  • Do not depress any of the two buttons while aim-ing at a human eye or while looking into the optics from the lens side.
  • Never aim the laser at an eye.
  • Do not aim the laser at people or animals.

GENERAL INFORMATION

  • Avoid looking directly at bright light sources with your Leica Geovid to prevent eye injury.

CAUTION
Non-compliance with the following points may result in personal injury or damage to the device.

LASER

  • Avoid touching any of the two buttons while the distance measurement function is not in use to prevent an accidental activation of the laser beam.
  • Do not attempt to disassemble, reassemble or repair the Leica Geovid yourself. Emitting laser radiation may pose a serious health risk. The manufacturer warranty is void, once a device was disassembled, reassembled or repaired.
  • Remove the battery immediately and stop using the device if the device housing is damaged or if it emits a strange sound after being dropped or behaves unexpectedly for any other reason.

GENERAL INFORMATION

  • Keep the device out of the reach of small children.
  • Do not use the device while walking. You might trip and fall.
  • Do not combine the operation of your Leica Geovid with other optical components, e.g. lenses or binoculars. Using the Leica Geovid in conjunction with another optical device increases the danger of damaging your eyes.
  • Do not attempt to disassemble or modify the de-vice; exposing the internal electronics may cause damage, injury or electric shock.

BATTERY

  • Only the battery type stated and described in this manual must be used. Any improper use of the batteries or the use of unapproved battery types may result in an explosion!
  • Do not expose the battery to sunlight, heat, hu-midity or moisture for prolonged periods of time. It must not be placed in a microwave oven or a high-pressure container as this would pose a fire or explosion hazard!
  • Never dispose of batteries in fire and never at-tempt to heat, recharge, dismantle or break open a battery.
  • Batteries must always be stored out of the reach of children. Do not leave batteries lying around, as they could be swallowed by children or pets.

CARRY STRAP

  • The carry strap is usually made of very robust ma-terial. You should therefore keep it out of the reach of children. A carry strap is not a toy and poses a strangulation risk.
  • Use the carry strap only for its intended purpose on a camera or on binoculars. Any other use poses the risk of injury and may possibly result in damage to the carry strap and is therefore not permitted.
  • Carry straps should also not be used for cameras/binoculars during sports activities that pose a risk of entanglement (e.g. when mountain climbing and similar outdoor activities).

IMPORTANT INFORMATION

GENERAL INFORMATION

  • Do not attempt to take the device apart yourself. Repairs must only be carried out in authorized workshops.
  • Remove the battery from the housing if you will not be using the product for an extended period of time.
  • Low temperatures impair battery performance. Carry the device close to the body in cold condi-tions and use a fresh battery.
  • Make sure to store the batteries in a cool, dry place.
  • Depleted batteries must never be disposed of in household waste as they contain toxic materials that are harmful to the environment. Battery col-lection points are provided at most large retail out-lets; alternatively, you can dispose of old batteries at a local special waste collection point to ensure correct recycling.
  • Do not touch the glass surfaces with your fingers, especially if you have previously applied hand cream, insect repellent, etc. These substances may contain chemicals that damage or destroy the coatings on the glass surfaces.

MEASURING VALUES

  • The influence of all ballistically relevant influencing factors is greatly increased at longer ranges and considerable variations may occur. The ballistic values displayed should therefore only be viewed as a guideline.
  • Regardless of whether this information is used, you are responsible for assessing the relevant hunting situation.
  • Leica Camera AG does not accept liability for the accuracy of values transmitted from third-party devices.
  • Powerful electric fields, e.g. emanating from radar systems, may cause errors and/or faulty values.
  • The geomagnetic field can similarly cause value deviations.

WARRANTY

In addition to your statutory warranty rights from your dealer, Leica Camera AG offers a 5-year warranty for this Leica product in accordance with the conditions started below. The Leica warranty does not impact on any statutory consumer rights in accordance with relevant national law or any consumer rights vis-a-vis the retailer arising from the purchase contract con-cluded between them.

WARRANTY CONDITIONS
By purchasing this Leica accessory, you have ac-quired a binoculars that are manufactured in compli-ance with special quality standards, and which were thoroughly tested at each individual production step by experienced specialists. Our five-year warranty for this product commences on the date of sale by an authorized retailer under the following conditions:

  1. In case of a complaint due to a manufacturing fault, we will assume all material costs during the warranty period. We shall decide at our own discretion to repair the faulty product, to replace faulty parts or to replace the entire product with a faultless product of the same type. All other claims of any kind and on whatever legal basis shall not be accepted in connection with this warranty.
  2. Wear parts like eyecups, leather details, armoring, carry straps and accessories are exempt from the warranty. The same applies for surface damage.
  3. Any warranty claims become void if the defect in question is a result of improper handling – which also includes the use of third-party accessories – or if the product was manipulated by unauthorized persons or workshops or if the serial number of the product was rendered illegible.
  4. Warranty claims can be submitted only in conjunc-tion with the original proof of purchase – complete with the date of purchase, as well as the address and signature of an authorized retailer.
  5. In case of a warranty claim, please send the Leica product, the original proof of purchase and a de-scription of the fault to Leica Camera AG Customer Care or a Leica regional subsidiary.

PICK-UP SERVICE FOR REPAIR SUBMISSIONS

(Applies for EU only)

We will organize the shipping of your device to our Customer Care department if you should notice a problem with your device during the warranty peri-od. Please contact our service hotline to make the necessary arrangements (+49 (0)6441 2080 189). Our pick-up service will collect your Leica product at the agreed time from your premises free of charge and transport it to our Customer Care location for evaluation.

Contact: en.leica-camera.com/Contact 

PART DESIGNATIONS

Leica-Geovid-Pro-Binoculars-FIG
2

  1. Menu Selection Button
    (meter/yard display), (display mode), (Bluetooth), (display brightness), (continuous Bluetooth operation)

  2. Main switch
    Switching the device ON/OFF

  3. Strap lugs

  4. Eyecups (rotating)
    Use without eye glasses: turn in counter-clock-wise direction

  5. Central focusing wheel
    Adjusting the focus

  6. Eyepiece cap

  7. Diopter compensation
    a Scale

  8. Center hinge

  9. Battery compartment cover
    Open: Use a coin to turn in anti-clockwise direction

  10. Lens caps

  11. Laser transmission lens

  12. Lens

  13. Battery compartment
    3 V lithium cell (type CR2)

  14. Target mark

  15. Display
    (value)/ (menu item)/ (equivalent horizontal range)/ (unit of measure)/ (Bluetooth)

Leica-Geovid-Pro-Binoculars-FIG 15

MENU CONTROL
ACCESSING THE MAIN MENU

  • Press and hold the menu selection button (≥3 s)
    • appears.

NAVIGATING IN THE MAIN MENU

  • Press the menu selection button repeatedly (<2 s each time) until the desired menu item appearsLeica-Geovid-Pro-Binoculars-FIG 18

SELECTING SETTINGS

  • Press the main switch 2 repeatedly (<2 s each time) until the desired menu item appears
    • The selected setting is initially lit continuously as confirmation, then the display switches to the next menu item and then disappears if no further settings are made.

OPERATION

SETTING THE INTERPUPILLARY DISTANCELeica-Geovid-Pro-Binoculars-FIG
19

SETTING THE IMAGE SHARPNESS

  • Look through the binoculars
  • Aim at the target object
  • Adjust the focusing wheel until you can see the target object with optimum sharpness

DISTANCE MEASUREMENT MADE EASYLeica-Geovid-Pro-Binoculars-FIG
20

  • Press the main switch briefly

  • Aim the target mark at the object

  • Press the main switch again

    • The target mark disappears briefly and the mea-sured value is displayed.
    • You can do another measurement at any time by pressing the main button while the target mark remains lit.
      – – – will appear in the following scenarios:
  • Distance to the object is less than 10 m/11 yd

  • Range capability is exceeded

  • Object is not sufficiently reflective

SCAN MODE (OBJECT TRACKING)

  • Press the main switch briefly
  • Aim at the object while target mark is lit
  • Press and hold main switch for approx. 2.5 seconds
    • The device switches to scan mode and will then measure continuously. Scan mode is indicated by a change in the display. A new measured value appears after approx. 0.5 seconds.

ATTACHING THE PROTECTIVE LENS CAP

Note

  • When positioned correctly, the protective lens cap will flip open downwards.

CONNECTING THE LEICA BALLISTICS APP

The device can be remotely controlled via smartphone. That will require the installation of the “Leica Ballistics” app on the mobile device. A list of available functions and instructions for their use can be found in the app.

  • The app is available from Apple App Store™/Google Play Store™

IN THE BINOCULARS

  • Press the menu selection button repeatedly
    • appears.
  • Select the desired setting via the main switch:
    • Off: Bluetooth® deactivated.
    • On: Bluetooth® activated.
    • will appear, once the function is activated.

ON THE MOBILE DEVICE

  • Activate Bluetooth®
  • Installation and startup of the “Leica Ballistics” app
  • Select the relevant device

TECHNICAL DATA

Designation| Leica Geovid Pro 8×32| Leica Geovid Pro 10×32| Leica Geovid Pro 8×42| Leica Geovid Pro 10×42| Leica Geovid Pro 8×56
---|---|---|---|---|---
Device type| Binoculars| Binoculars| Binoculars| Binoculars| Binoculars
Type No.| 5932| 5932| 6931| 6931| 6931
Order No.| 40809| 40810| 40815| 40816| 40817
Scope of delivery| Binoculars, carry strap, eyepiece cover, carry case, lens cleaning cloth, instruction manual, test certificate
Magnification| 8x| 10x| 8x| 10x| 8x
Lens diameter| 32 mm| 32 mm| 42 mm| 42 mm| 56 mm
Exit pupil| 4 mm| 3.2 mm| 5.25 mm| 4.2 mm| 6.9 mm
Twilight factor| 16| 17.9| 18.3| 20.5| 21.2
Eye relief| 16 mm| 16 mm| 18 mm| 16 mm| > 18 mm
Closest focusing distance| approx. 5 m/16 ft| approx. 5 m/16 ft| approx. 5 m/16 ft| approx. 5 m/16 ft| 5.8 m/19 ft
Field of view at 1,000 m/1094 yd| 7.0° (135 m/405 ft.)| 5.8° (115 m/345ft.)| 7.3° (130 m/390ft.)| 6.5° (114 m/342ft.)| 6.8° (118 m/387ft.)
Diopter compensation| ±4 dpt| ±4 dpt| ±4 dpt| ±4 dpt| ±4 dpt
Interpupillary distance adjustable| 56 – 74 mm| 56 – 74 mm| 56 – 74 mm| 56 – 74 mm| 60 – 74 mm
Range

On highly reflective targets

| max. approx. 2300 m/2406 yd| max. approx. 3200 m/2950 yd
Measuring accuracy| ± 0.5 m at 10 – 200 m / 0.5 yds at 10 – 219 yds; ± 1.0 m at 200 – 400 m / 1.0 yds at 219 – 438 yds; ± 0.5 % above 400 m / 0.5 % above 438 yds
Display/Unit of measure| 4 seven-segment LEDs plus additional icons, optional display setting in yard/inch or meter/centimeter
Max. measurement time| approx. 0.3 s
Wireless connection| Bluetooth® 5.0 (Low Energy)
Protection type| Waterproof to a depth of 5 m/16 ft
Operating temperature| Electrical: -20 to 55°C/-4 to 131°F, Mechanical: -30 to 55°C/-22 to 131°F
Storage temperature| -40 to +85°C/-40 to 185°F
Material| Magnesium die-cast, non-slip rubber reinforcement
Dimensions (W x H x D)| 117 x 153 x 70 mm/

4.6 x 6.0 x 2.8 in

| 117 x 153 x 70 mm/

4.6 x 6.0 x 2.8 in

| 125 x 178 x 70 mm/

4.9 x 7.0 x 2.8 in

| 125 x 174 x 70 mm/

4.9 x 6.9 x 2.8 in

| 153 x 187 x 90 mm/

6.0 x 7.3 x 3.5 in

Weight (without battery)| approx. 820 g/28.9 oz| approx. 820 g/28.9 oz| approx. 1000 g/35.3 oz| approx. 970 g/34.2 oz| approx. 1195 g/42 oz

Subject to changes in design, production, and scope of delivery.

FOR US ONLY

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Trade Name: LEICA   Type No.: 5932 / 6931
Type No. 5932 / 6931
Responsible party/Support contact: Leica Camera Inc.

1 Pearl Count, Unit A, Allendale, New Jersey 07401 Tel.: +1 201 995 0051/ Fax: +1 201 995 1684

technicalinfo@leicacamerausa.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: N5A5932 / N5A6931
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

FOR CANADA ONLY:
CAN ICES-3 (B)/NMB-3(B) IC: 11245A-5932 /11245A-6931
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

Importer:
Leica Camera Ltd.
6-8 James Street
W1U 1ED London
Phone: +44 01908 699330

Address of manufacturer:
LEICA Camera AG
Am Leitz-Park 5
35578 Wetzlar
Germany

Country of origin:
Made in Portugal

leica-camera.com/Service-Support

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals