Palmer RIVER Series 1-Kanal Line Isolation Box Passiv User Manual
- June 11, 2024
- Palmer
Table of Contents
RIVER Series 1-Kanal Line Isolation
Box Passiv
User Manual
Be True To Your Sound!
RIVER Series 1-Kanal Line Isolation Box Passiv
Let your signals flow, naturally and powerfully like a river! The River Series
embodies this claim down to the last detail: featuring high-precision
circuits, designed by our award-winning engineers to ensure your sound
reaches its destination – the hearts of your listeners.
That’s exactly what Palmer® stands for. We have been manufacturing audio tools
for professional use on stage, in broadcasting and in the studio since 1980.
Musicians and sound engineers around the world value our solutions developed
in Germany for their unhindered signal flow and pure sound – as crystal clear
and vibrant as water! So what was more logical than naming the River Series
models after German rivers?
On the map of Germany you can see where the Iller flows: 147 kilometres
between Bavaria and Baden-Württemberg.
Thank you for purchasing the iller! We hope you enjoy this piece of German
engineering.
Be true to your sound!
Yours, the Palmer Team
INTENDED USE
This product is a device for event technology, as well as studio, TV and
broadcast!
This product has been developed for professional use in the fields of event
technology, studio, TV and broadcast.
It is not suitable for household use!
Furthermore, this product is only intended for qualified users with specialist
knowledge of event technology, as well as studio, TV and broadcast!
Use of the product outside the specified technical data and operating
conditions is considered inappropriate!
Liability for damage and third-party damage to persons and property due to
inappropriate use is excluded!
The product is not suitable for:
- Persons (including children) with limited physical, sensory or mental abilities or lack of experience and knowledge.
- Children (children must be instructed not to play with the device).
SAFETY INSTRUCTIONS
- Please read these instructions carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Use the device in the prescribed manner only.
- Do not open the device and do not perform any modifications.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS AND PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!
INTRODUCTION
The iller Line Isolation Box is equipped with a combo socket on the input
side, which can be assigned with an XLR or 6.3 mm jack plug. The input allows
the connection of playback devices with balanced or unbalanced connections.
The balanced line output is equipped with a male XLR socket. There is galvanic
isolation between input and output by means of a high-quality transformer.
With the help of the ground lift switch to disconnect the ground connection of
input and output, hum loops and other interfering signals are effectively
eliminated.
Audio signals can also be transmitted hum-free over long cable runs with the
help of the iller.
CONNECTIONS
-
INPUT
Line input with combo jack (XLR / 6.3 mm jack) suitable for both unbalanced and balanced cabling.
Use a shielded audio cable to connect, for example, a keyboard to the Line Isolation Box. -
OUTPUT
Balanced line-out via 3-pin XLR jack. Use a shielded audio cable to connect the Line Isolation Box to a balanced input of a mixing console or audio interface. -
LIFT / GND
Switch for disconnecting the ground connection from the input and output (ground lift). In the non-pressed position, the ground connection is disconnected; the connection is established when the switch is pressed. The ability to prevent a humming loop using the ground lift switch depends on the grounding of the connected device. It is therefore possible that the switch is able to effectively reduce or eliminate humming when it is either up or down, depending on circumstances.
CAUTION: Connecting signal cables can cause considerable noise. Please make sure that the input channels of mixing console and audio interfaces, etc. are muted when plugged in. Otherwise, noise levels may cause damage.
NOTE: Strong magnetic fields can cause humming. Therefore, do not position the Line Isolation Box near strong magnetic fields (e.g. mains transformer).
WIRING EXAMPLE
TECHNICAL DATA
| Product number | PILLER |
|---|---|
| Product type | Line Isolator |
| No. of channels | 1 |
| Type | passive |
| Transformer isolated | yes |
| No. of inputs | 1 |
| Input type | symmetrical/asymmetrical |
| Input connections | 6.3 mm Jack, XLR |
| No. of outputs | 1 |
| Output type | symmetrical/asymmetrical |
| Output connections | XLR |
| Ground/lift switch | yes |
| Housing | Aluminium continuous casting |
| Dimensions (H/W/D) | 110 x 50 x 50 mm |
| Weight | 0.3 kg |
| Ambient temperature for operation | -20°C…70°C |
| Relative air humidity | <80 %, non-condensing |
| Included accessories | Rubber feet, inscription label |
AUDIO
Max. Input level (< 1% THD, 20 Hz)| +10 dBu
Max. Input level (< 1% THD, 1 kHz)| +32 dBu
Frequency response (±2dB, relative 1kHz)| 20 Hz – 20 kHz
Input impedance (1 kHz, setting: 0 dB PAD)| 17 kΩ
Output impedance (1 kHz, setting: 0 dB PAD)| 500 Ω
THD (30 Hz, +4 dBu, unity, unweighted)| < 0.09 %
THD (1 kHz, +4 dBu, unity, unweighted)| < 0.002 %
IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu)| < 0.002 %
Transformer ratio| 1:01
DISPOSAL
PACKAGING:
- Packaging can be fed into the reusable material cycle using the usual disposal methods.
- Please separate the packaging in accordance with disposal laws and recycling regulations in your country.
DEVICE:
-
This device is subject to the European Waste Electrical and Electronic Equipment Directive in the currently valid version. WEEE Waste Electrical and Electronic Equipment Directive.
Old appliances do not belong in household waste. The old device must be disposed of via an approved disposal company or a munici pal disposal facility. Please observe the applicable regulations in your country! -
Observe all disposal laws applicable in your country.
-
As a private customer, you can obtain information on environmentally friendly disposal options from the seller of the product or the appropriate regional authorities.
BATTERIES:
- Batteries should not be disposed of in house hold waste. Batteries and rechargeable batteries must be disposed of via an approved disposal company or a municipal disposal facility.
- Observe all disposal laws applicable in your country.
- As a private customer, you can obtain information on environmentally friendly disposal options from the seller of the product or through the relevant regional authorities.
- Devices with batteries that cannot be removed by the user must be taken to a collection point for electrical appliances.
MANUFACTURER’S DECLARATIONS
Manufacturer’s warranty & limitation of liability
Adam Hall GmbH
Adam-Hall-Str. 1
61627, Neu-Anspach, Germany
Email: Info@adamhall.com / +49 (0)6081 / 9419-0.
Our current warranty conditions and limitation of liability can be found at:
https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declarations-
PALMER_DE_EN_ES_FR.pdf
Contact your distribution partner for service.
CE CONFORMITY
Adam Hall GmbH hereby confirm that this product meets
the following guidelines (where applicable):
Low-Voltage Directive (2014/35/EU)
EMC Directive (2014/30/EU)
RoHS (2011/65/EU)
RED (2014/53/EU)
EC DECLARATION OF CONFORMITY
Declarations of conformity for products that
are subject to the LVD, EMC, RoHS Directives,
can be requested at info@adamhall.com.
Declarations of conformity for products
that are subject to the RED Directive
can be downloaded at
www.adamhall.com/compliance/.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation
UKCA- CONFORMITY
Hereby, Adam Hall Ltd. declares that this product meets the following
guidelines (where applicable)
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulation 2012 (SI 2012/3032) Radio Equipment
Regulations 201 7(SI 2016/2015)
UKCA- DECLARATION OF CONFORMITY
Products that are subject to Electrical Equipment(Safety)
Regulation 2016, EMC Regulation 2016 or RoHS Regulation can
be requested at info@adamhall.com.
Products that are subject to the Radio Equipments Regulations 2017
(SI2017/1206) can be downloaded from
www.adamhall.com/compliance/
SUBJECT TO MISPRINTS AND ERRORS, AS WELL AS TECHNICAL OR OTHER MODIFICATIONS!
Documents / Resources
|
Palmer RIVER Series 1-Kanal Line Isolation Box
Passiv
[pdf] User Manual
1 CH, River Series, RIVER Series 1-Kanal Line Isolation Box Passiv, 1-Kanal
Line Isolation Box Passiv, 1-Kanal Box Passiv, Box Passiv, Passiv, Line
Isolation Box Passiv
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>