Palmer AHPTAUBER Tauber Microphone Merge Box Passive User Manual
- June 5, 2024
- Palmer
Table of Contents
Palmer AHPTAUBER Tauber Microphone Merge Box Passive 1
INTRODUCTION
Use the tauber microphone merge box to connect two microphones to a balanced input on a mixer or audio interface if, for example, the number of available channels is not sufficient. Because the decoupling takes place via a balanced resistance matrix, the merge box can be used with phantom power, which means that condenser microphones can also be used (two condenser microphones: phantom power P max 1/2). Avoid connecting a dynamic and a condenser microphone together on the summing mixer, as the microphone types have very different levels and sound characteristics. Tip: Use two identical microphones.
RIVER SERIES
Let your signals flow, naturally and powerfully like a river! The River Series embodies this claim down to the last detail: Featuring high-precision circuits, designed by our award-winning engineers to ensure your sound reaches its destination unadulterated – the hearts of your listeners. That’s exactly what Palmer® stands for. We have been manufacturing audio tools for professional use on stage, in broadcasting and in the studio since 1980. Musicians and sound engineers around the world value our solutions developedin Germany for their unhindered signal flow and pure sound – as crystal clear and vibrant as water! So what was more logical than naming the River Series models after German rivers? On the map of Germany you can see where the Tauber flows: 105 kilometres between Baden-Württemberg and Bavaria. Thank you for purchasing the tauber! We hope you enjoy this piece of German engineering. Be true to your sound!
INTENDED USE
- This product is a device for event technology, as well as studio, TV and broadcast!
- This product has been developed for professional use in the field of event technology, studio, TV and broadcast.
- It is not suitable for household use!
- Furthermore, this product is only intended for qualified users with specialist knowledge of event technology, as well as studio, TV and broadcast!
- Use of the product outside the specified technical data and operating conditions is considered inappropriate!
- Liability for damage and third-party damage to persons and property due to inappropriate use is excluded!
- Persons (including children) with limited physical, sensory or mental abilities or lack of experience and knowledge.
- Children (children must be instructed not to play with the device).
SAFETY INSTRUCTIONS
- Please read these instructions carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Use the device in the prescribed manner only.
- Do not open the device and do not perform any modifications.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS AND PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!
Microphone merge box tauber passive
CONNECTIONS AND OPERATING ELEMENTS
-
* Balanced microphone input with a female 3-pin XLR socket. The microphone signals of the two inputs INPUT A and INPUT B are output mono summed via OUTPUT.INPUT - INPUT B
- Balanced microphone input with a female 3-pin XLR socket. The microphone signals of the two inputsINPUT A and INPUT B are output mono summed via OUTPUT.
- OUTPUT
- Balanced audio output with a male 3-pin XLR socket. Use a balanced microphone cable to connect the summing mixer to a balanced microphone input on a mixer or audio interface.
WIRING EXAMPLES
TECHNICAL DATA
GENERAL
DISPOSAL
PACKAGING
- Packaging can be fed into the reusable material cycle using the usual disposal methods.
- Please separate the packaging in accordance with disposal laws and recycling regulations in your country.
DEVICE
- This device is subject to the European Waste Electrical and Electronic Equipment Directive in the currently valid version. WEEE Waste Electrical and Electronic Equipment Directive. Old appliances do not belong in household waste. The old device must be disposed of via an approved disposal company or a municipal disposal facility. Please observe the applicable regulations in your country!
- Observe all disposal laws applicable in your country.
- As a private customer, you can obtain information on environmentally friendly disposal options from the seller of the product or the appropriate regional authorities.
BATTERIES
- Batteries should not be disposed of in household waste. Batteries and rechargeable batteries must be disposed of via an approved disposal company or a municipal disposal facility.
- Observe all disposal laws applicable in your country.
- As a private customer, you can obtain information on environmentally friendly disposal options from the seller of the product or through the relevant regional authorities.
- Devices with batteries that cannot be removed by the user must be taken to a collection point for electrical appliances.
MANUFACTURER’S DECLARATIONS
- Manufacturer’s warranty & limitation of liability
- Adam Hall GmbH
- Adam-Hall-Str. 1
- 61627, Neu-Anspach, Germany
- E-mail: Info@adamhall.com / +49 (0)6081 / 9419-0.
- Our current warranty conditions and limitation of liabilit can be found at: https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declarations-PALMER_DE_EN_ES_FR.pdf Contact your distribution partner for service.
CE conformity
Adam Hall GmbH hereby confirm that this product meets the following guidelines (where applicable):
- Low-Voltage Directive (2014/35/EU)
- EMC Directive (2014/30/EU)
- RoHS (2011/65/EU)
- RED (2014/53/EU)
EC Declaration of Conformity
Declarations of conformity for products that are subject to the LVD, EMC, RoHS
Directives, can be requested at info@adamhall.com
Declarations of conformity for product that are subject to
the RED Directive can be downloaded at
www.adamhall.com/compliance/
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation