Palmer PAOCLXLRM AoC Cat Over Instruction Manual
- June 1, 2024
- Palmer
Table of Contents
Palmer PAOCLXLRM AoC Cat Over
Specifications
- Item No.: PAOCLXLRM
- Product type: Adapters
- Type: Audio over Cat adapter
- No. of channels : 4
- Total inputs : 4
- Input type: Balanced
- Input connection: RJ45
- Total outputs: 4
- Output type: Balanced
- Output connection : XLR male
- Housing material: Aluminium and steel
- Cable length: 0.5 m
- Weight: 0.38 kg
- Ambient temperature:
- Humidity: < 80% (non-condensing)
Product Usage Instructions
Safety Instructions
- Please read this manual carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Use the device in the prescribed manner only.
- Do not open the device and do not perform any modifications.
CHOKING HAZARD!
KEEP OUT OF THE REACH OF CHILDREN! The product contains small parts that can
be swallowed as well as packaging material that can be swallowed! Plastic bags
must be kept out of the reach of children!
CE Conformity
Adam Hall GmbH confirms that this product meets the following guidelines:
- Low-Voltage Directive (2014/35/EU)
- EMC Directive (2014/30/EU)
- RoHS (2011/65/EU)
- RED (2014/53/EU)
INTRODUCTION
This Palmer AoC product was developed to transmit audio signals reliably over long distances without loss or hum via Cat cable. Up to four balanced analog channels or up to eight channels in digital AES3 format can be transmitted. The compact and modular design is suitable for a wide range of applications in the studio, on stage, and in permanent instal-lations. This product is suitable for use with phantom power. Preferably use balanced cables for analog signal transmission, as these are significantly less susceptible to interference than unbalanced cables. Digital signal transmission in AES3 format requires balanced cabling.
CONNECTIONS
Plug a shielded Cat cable (Cat5e or better) with etherCON connectors (or compatible) into the etherCON socket and connect the other end of the cable to another Palmer AoC Loom (e.g. PAOCLXLRF), a Palmer AoC Box or another suitable Palmer device with an AoC interface (or other devices with AES72 type 5E pin assignment).
There are four male 3-pin XLR connectors (channels 1 – 4) at the end of the breakout cable. Connect these to the balanced inputs of an active speaker, amplifier, mixing console, audio interface, etc. or to the AES3 inputs of a digital audio device. Various devices can be used simultaneously.
SPECIFICATIONS
INTENDED USE
- This product is a device for event technology, as well as studio, TV, and broadcast!
- This product has been developed for professional use in the field of event technology, studio, TV, and broadcast. It is not suitable for household use!
- Furthermore, this product is only intended for qualified users with specialist knowledge of event technology, as well as studio, TV, and broadcast!
- Use of the product outside the specified technical data and operating conditions is considered improper use!
- Liability for damage and third-party damage to persons and property due to inappropriate use is excluded!
The product is not suitable for:
- Persons (including children) with limited physical, sensory, or mental abilities or lack of experience and knowledge.
- Children (children must be instructed not to play with the product).
SAFETY INSTRUCTIONS
- Please read this manual carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Use the device in the prescribed manner only.
- Do not open the device and do not perform any modifications.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AS WELL AS PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
- Our current warranty conditions and limitation of liability can be found at: www.adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.pdf
- If service is required, please contact Adam Hall GmbH, Daimlerstraße 9, 61267 Neu Anspach / E-mail Info@adamhall.com / +49 (0)6081 / 9419-0
CORRECT DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries that mandate waste
separation). This symbol on the product or associated documents indicates that
to prevent environmental damage and personal injury through uncontrolled waste
disposal, the product must not be disposed of with normal household waste at
the end of its service life. Please dispose of this product separately from
other waste and recycle it to promote sustainable commercial activity. As a
private customer, you can obtain information on environmentally friendly
disposal options from the vendor of the product or the appropriate regional
authorities. As a commercial user, please contact your supplier and check for
any contractually agreed conditions on disposing of the equipment. This
product must not be disposed of with other commercial waste.
PLEASE NOTE
The shielding of breakout cable is connected to the shielding of the Cat cable
via the Cat plug and Cat socket.
CE CONFORMITY
- Adam Hall GmbH hereby confirms that this product meets the following guidelines (where applicable):
- Low-Voltage Directive (2014/35/EU)
- EMC Directive (2014/30/EU)
- RoHS (2011/65/EU)
- RED (2014/53/EU)
- For use in dry indoor areas.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
UKCA- Conformity
Hereby, Adam Hall Ltd. declares that this product meets the following
guidelines (where applicable) Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091).
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulation 2012 (SI 2012/3032) Radio Equipment
Regulations 201 7(SI 2016/2015)
Adam Hall Ltd. | The Seedbed Bus. Centre | SS3 9QY Essex | UK
UKCA- Declaration of Conformity
Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC
Regulation 2016 or RoHS Regulation can be requested at
info@adamhall.com.
Products that are subject to the Radio Equipments Regulations 2017
(SI2017/1206) can be downloaded from
www.adamhall.com/compliance/
SUBJECT TO MISPRINTS AND ERRORS, AS WELL AS TECHNICAL OR OTHER MODIFICATIONS!
MORE INFORMATION
Palmer® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Adam Hall Ltd. | The Seedbed Bus. Centre | SS3 9QY Essex | UK
info@adamhall.com
adamhall.com
Designed and engineered in Germany, assembled in P.R.C.
Frequently Asked Questions
- Q: Can this adapter be used outdoors?
- A: No, this adapter is designed for use in dry indoor areas only.
- Q: What is the maximum input level for audio?
- A: The maximum input level for audio is +32 dBu (< 1 % THD, 1 kHz).
- Q: What is the housing material of the adapter?
- A: The housing material of the adapter is made of aluminum and steel.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>