Palmer Paocltrsm Audio Over Cat Multicore Adapter Cable Instruction Manual

: June 1, 2024
: Palmer

Table of Contents

Palmer Paocltrsm Audio Over Cat Multicore Adapter Cable
Product Usage Instructions
FCC STATEMENT
INTRODUCTION
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Palmer Paocltrsm Audio Over Cat Multicore Adapter Cable

$Palmer-Paocltrsm-Audio-Over-Cat-Multicore-Adapter-Cable-FIG- $2$$

Specifications

Item No.: PAOCLTRSM
General
- Product type: Adapters
- Type: Audio over Cat adapter
- No. of channels: 4
- Total inputs: 4
- Input type: Balanced
- Input connection: RJ45
- Total outputs: 4
- Output type: Balanced
- Output connection: 6.35 mm TRS stereo jack
- Housing material: Aluminium and steel
- Cable length: 0.5 m
- Weight: 0.35 kg
- Ambient temperature:
- Humidity: < 80 % (non-condensing)
Audio
- Max. Input level: +32 dBu (< 1 % THD, 1 kHz)
- Frequency response:
- THD+N: < 0.0005 % (1 kHz, +4 dBu, unity, unweighted)
RJ45 pin assignment (AES72 type 5E, symmetrically wired, straight = +)
- Pin 1 – Ch 3 –
- Pin 2 – Ch 3 +
- Pin 3 – Ch 4 –
- Pin 4 – Ch 1 +
- Pin 5 – Ch 1 –
- Pin 6 – Ch 4 +
- Pin 7 – Ch 2 –
- Pin 8 – Ch 2 +
- Channel color code
- Ch 1 – red
- Ch 2 – green
- Ch 3 – blue
- Ch 4 – white

Product Usage Instructions

Installation

Connect the audio source to the input connections using balanced cables.
Connect the output connections to the desired audio equipment.

Powering On
Ensure the device is connected to a power source if required.

Signal Transmission
Verify that the Cat cable is properly connected to transmit audio signals.

Adjusting Settings
Use the device by the specifications provided.

Maintenance
Keep the device clean and free from dust or debris for optimal performance.

Troubleshooting
Refer to the user manual for troubleshooting steps in case of any issues.

Storage
Store the device in a dry indoor area when not in use to prevent damage.

Frequently Asked Questions (FAQ)

Q: Can I use unbalanced cables with this product?
A: It is recommended to use balanced cables for better interference resistance.
Q: What should I do if the device does not transmit audio signals?
A: Check the cable connections and ensure they are securely plugged in. Refer to the troubleshooting section of the manual for further guidance.
Q: Is it safe to open the device for repairs?
A: No, it is advised not to open the device or perform any modifications. Seek professional assistance for repairs.

INTENDED USE

This product is a device for event technology, as well as studio, TV and broadcast!
This product has been developed for professional use in the field of event technology, studio, TV and broadcast. It is not suitable for household use!
Furthermore, this product is only intended for qualified users with specialist knowledge of event technology, as well as studio, TV and broadcast!
Use of the product outside the specified technical data and operating conditions is considered improper use!
Liability for damage and third-party damage to persons and property due to inappropriate use is excluded!

The product is not suitable for:

Persons (including children) with limited physical, sensory or mental abilities or lack of experience and knowledge.
Children (children must be instructed not to play with the product).

SAFETY INSTRUCTIONS

Please read this manual carefully.
Keep all information and instructions in a safe place.
Follow the instructions.
Use the device in the prescribed manner only.
Do not open the device and do not perform any modifications.

CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AS WELL AS PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
Our current warranty conditions and limitation of liability can be found at:
www.adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.pdf
If service is required, please contact Adam Hall GmbH, Daimlerstraße 9, 61267 Neu Anspach / E-mail Info@adamhall.com / +49 (0)6081 / 9419-0

CORRECT DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries which mandate waste separation) This symbol on the product or associated documents indicates that to prevent environmental damage and personal injury through uncontrolled waste disposal, the product must not be disposed of with normal household waste at the end of its service life. Please dispose of this product separately from other waste and recycle it to promote sustainable commercial activity. As a private customer, you can obtain information on environmentally-friendly disposal options from the vendor of the product or the appropriate regional authorities. As a commercial user, please contact your supplier and check for any contractually agreed conditions on disposing of the equipment. This product must not be disposed of with other commercial waste.

PLEASE NOTE:
The shielding of the breakout cable is connected to the shielding of the Cat cable via the Cat plug and Cat socket.

CE CONFORMITY
Adam Hall GmbH hereby confirms that this product meets the following guidelines (where applicable):

Low-Voltage Directive (2014/35/EU)
EMC Directive (2014/30/EU)
RoHS (2011/65/EU)
RED (2014/53/EU)
For use in dry indoor areas.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation

UKCA- Conformity

Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable) Electrical Equipment (Safety) Regulations 2016 Electromagnetic Compatibility Regulations 2016 (SI 2016/1091).
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 (SI 2012/3032) Radio Equipment Regulations 201 7(SI 2016/2015) Adam Hall Ltd. | The Seedbed Bus. Centre | SS3 9QY Essex | UK

UKCA- Declaration of Conformity

Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC Regulation 2016 or RoHS Regulation can be requested at info@adamhall.com.
Products that are subject to the Radio Equipments Regulations 2017 (SI2017/1206) can be downloaded from www.adamhall.com/compliance/

SUBJECT TO MISPRINTS AND ERRORS, AS WELL AS TECHNICAL OR OTHER MODIFICATIONS!

INTRODUCTION

This Palmer AoC product was developed to transmit audio signals reliably over long distances without loss or hum via Cat cable. The compact and modular design is suitable for a wide range of applications in the studio, on stage and in permanent installations. Preferably use balanced cables, as these are significantly less susceptible to interference than unbalanced cables.

CONNECTIONS

Plug a shielded Cat cable (Cat5e or better) with etherCON connectors (or compatible) into the etherCON socket and connect the other end of the cable to another Palmer AoC Loom (e.g. PAOCLXLRM), a Palmer AoC Box or another suitable Palmer device with an AoC interface (or other devices with AES72 type 5E pin assignment).
There are four 6.35 mm TRS jack plugs (channel 1 – 4) at the end of the breakout cable. Use the adapter as both an input and output unit. The adapter can be used for different signal sources and to control various devices simultaneously.