W HLER VIS350 Pan and Tilt Miniature Camera Head Ø 40 Mm Instruction Manual

: June 4, 2024
: W HLER

W HLER VIS350 Pan and Tilt Miniature Camera Head Ø 40 Mm

W HLER VIS350 Pan and Tilt Miniature Camera Head Ø 40 Mm
PRODUCT

General Information

Operation Manual In-formation

This operation manual allows you to work safely with the Wohler Camera Head. Please keep this manual for your information.
The Wohler Camera Head should be employed by professionals for its intended use only.
Liability is void for any damages caused by not following this manual.

ATTENTION!
Not following this note can cause permanent damage to the device.

Intended Use

The Wöhler pan and tilt camera head is designed for the inspection of pipes, air ducts chimneys, water lines, ventilation lines. It has to be connect-ed to the Wöhler VIS camera system.

Transport

ATTENTION!
Improper transport can harm the camera head.

Always transport camera head in the provided box in order to prevent damage.

Information on disposal

Electronic equipment does not belong into domes-tic waste, but must be disposed in accordance with the applicable statutory provisions.

Manufacturer

Wohler Technik GmbH
Wohler-Platz 1
33181 Bad Wünnenberg
Tel.: +49 2953 73-100
Fax: +49 2953 73-96100
E-Mail: info@woehler.de

Technical Data

| Specification
---|---
Type| 1/3“ COLOR CMOS
Pan and tilt| 360° / 180°
Protection| Waterproof according to IP 67
Field of View| 160°
Light Source| 12 white LEDs
Emitter frequency| 8,9 KHz
Lens system| f = 2,3 mm or 0.1”
F = 2,5
Size| Ø 40 mm or 1.5 “
Operation temperature| 0 to 40 °C or 32 to 104°F, RH 95% max
Working temperature| -29 to 50 °C or -20.2 to 122 °C , RH 95% max

Elements of the camera head

W HLER VIS350 Pan and Tilt Miniature Camera Head Ø 40 Mm
01

Connecting the camera cable or rod

The pan and tilt miniature camera head is connected via a clutch socket with 8 poles to the cable or the rod.

Plug the camera head and camera cable or the rod together.
Turn the thread clockwise for closing the screw connection tightly for a waterproof connection.

ATTENTION!
Only a tight connection guarantees a waterproof connection.

Controlling the camera head

The pan and tilt camera head is controlled by the keys of the camera system.

Home-Function

The home function ensures the camera head is automatically aligned to a straight position, ensuring the camera “looks straight ahead”.
Moreover, when the user presses the HOME key, the camera head aligns itself so that the display is parallel with the ground above (this function is deactivated if the camera head faces 90° upwards or downwards. Under these circumstances, the optics can only be guided forwards).
To activate the home function, press the SHIFT key and then the HOME key on the keyboard of the camera system.

Localization

The Wohler camera head Ø 40 mm is equipped with a transmitter coil that transmits signals. These signals can be located by the Locator Wohler L 200. This way it is possible to locate the ex-act position of the camera head in the pipe system.
NOTE!

Maintenance

Clean the lens only with a clean damp cloth but never with cleaning agent.

Warranty and Service

Warranty

Each Wohler camera head will be tested in all functions and will leave our factory only after ex-tensive quality control testing. The guarantee period for the meter is 12 months from the sales date, provided that it is used correctly.
This warranty does not cover the freight and packing costs when the device is sent to the factory for repair. Service by non authorized personnel or making modifications camera head voids any warranty.

Service

Wohler has built our reputation on excellence in customer service. Therefore, of course, we are readily available to assist you after the warranty period ends.
- Send us the device and we will repair it and return it to you with our package service.
- Immediate help is provided by our technical staff over the telephone.

Declaration of conformity

The manufacturer :
WÖHLER Technik GmbH
Wohler-Platz 1, D-33181 Bad Wünnenberg
Declares that the product:
Pan and tilt camera head Wohler Ø 40 mm
Wohler VIS
complies with the essential protection requirements of Council directive 2014/30/CE on the approximation of the laws of the Member States relating to electromagnetic combability.
The meter conforms to the following standards: