LinksTek PCIE-SE2 PCIE Serial and Parallel Port Cards Instruction Manual

LinksTek PCIE-SE2 PCIE Serial and Parallel Port Cards Instruction Manual

Product Description

PCIE-SE2 PCIE Dual Ports Serial Card

Links Tek PCIE-SE2 is a PCIE to dual ports RS232 serial expansion card.
It is based on ASIX AX99100 solution. Allow users to add dual serial RS232 DB9 ports on deskt -op PCs, working stations or industrial equipment by PCIE X1 interface.
Users can ful use the old device with Serial RS232 ports such as modem, cellular phone, PDA, ISDN terminal adapter, satellite receiver, graphic tablet, bar -ecode scanner, label printer, automated teller machine, GPS, finger print identification, Infra-Red transceiver, packet radio, magnetic card reader, POS devices, automation interface, card reader and more serial ports devices.

DB9 Pin

1. Data Carrier Detect
2. Received Data
3. Transmitted Data
4. Data Therminal Ready
5. Ground
6. Data Send Ready
7. Request to Send
8. Clear to Send
9. Ring Indicator

Compatible System

Linux need to refer to compile source code in mini CD. Need to install driver on Windows XP, Vista, 7, 8.0, 8.1, 10,11 (32/64bit) systems.

Package List

• 1X PCIE-SE2, 1X User Manual, 2X Lowprofile Bracket
• 1X Mini-CD, 1X Mount Screw

PCIE-PA1 PCIE Parallel/LPT Port Card

Links Tek PCIE-PA1 is a PCI Express X1 interface to 1-Ports DB25 LPT parallel card. It is based on ASIX AX99100 solution and compatible with most Windows OS and Linux systems. It is based on ASIX AX99100 PCIE to parallel host controller solution. Allow users to add 1-Parallel DB25/LPT port on desktop PCs, working stations or industrial devices by a single PCIE slot. Fully support IEEE 1284 protocol, Support ECP, EPP, SPP, Nibble, Byte mode, will work on most of parallel port peripheral devices such as printers, scanners, CD-R/RW drives, memory card readers, bar code scanners etc.

DB25 Pin

1. Strobe
2. Data 0
3. Data 1
4. Data 2
5. Data 3
6. Data 4
7. Data 5
8. Data 6
9. Data 7
10. Acknowledge
11. Busy
12. Paper Empty
13. Select
14. Auto Feed
15. Error
16. Initialize Printer
17. Select in
18. Ground
19. Ground
20. Ground
21. Ground
22. Ground
23. Ground
24. Ground
25. Ground

Compatible System

Linux need to refer to compile source code in mini CD. Need to install driver on Windows XP, Vista, 7, 8.0, 8.1, 10, 11 (32/64bit) systems.

Package List

• 1X PCIE-PA1, 1X User Manual,
• 1X Low Profile Bracket
• 1X Mount Screw

Add Network Card on Desktop PCs

Step 1:
Switch OFF PC, unplug computer from main socket, unplug power cord and other connected peripherals. Remove the cover from computer case.

Step 2:
Find correct PCI Express slot from motherboard, insert PCIE Serial/Parallel card into an empty PCI-E slot.

Works on PCIE X1,X2,X4,X8,X16 slot

Step 3:
Reattach the computer cover, and put back removed peripherals, power on desktop computer.

Check If Hardware Detected By PCs

After hardware installation is complete, please refer to steps as below to check whether the hardware is connected well.

1. Select “This PC” (Windows 11,10,8.1,8) “Computer” (Windows Server, 7, Vista, XP).
2. A. Left click and select “Manage”-“Device Manager” -“Other Device”-“PCI Serial/Parallel”
   Means PCIE Serial/Parallel device was connected well But need to install driver.
   B. Left click and select “Manage”-“Device Manager” -“Other Device”-“Ports(COM&LPT)”-“Multifunction Device”
   Means PCIE Serial/Parallel device was connected well But need to install driver.
   C. Left click and select “Manage”-“Device Manager” -“Other Device” no “PCI Serial/Parallel ” and no “Ports (COM&LPT)” -“Multifunction Device”
   Means users need to replug this card on PCIE slot or change to other PCIE slot. Cause the add-on card is not detected by PC.

Install Driver on Desktop PCs

Model: PCIE-SE2, PCIE-PA1 share the same driver and the same driver installation panel on systems Windows XP, Vista, 7,8.X, 10,11(32/64). The driver installation steps as below are for Windows XP, Vista, 7,8.X,10,11(32/64) and Linux, please use Mini CD or Download installation steps from our official site www.linkstek.com

Step 1:
Select correct driver for users system.
NOTE: Driver files are in different file folders, before selecting driver, please confirm system version. For example, user using Windows 7 32 bit system selects file folder name “Windows 7, Vista, XP 32 bit ”

Step 2:
Double-left lick, start up driver installation guide.

Step 3:
Left click “Install” to fill all related driver in system. Windows may take 1-2 minutes to install all related drivers on PC.

Step 4:
After driver installation is done, click “Exit”

Step 5:
Users will find the add on card in Windows device manager-Ports(COM&LPT)-PCIe to High Speed Serial Port(COM 2) or PCIe to Multi Mode Parallel Port (LPT1)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>