TESLA BL601BX Blender User Manual

BLENDER
BL601BX
User Manual

IMPORTANT SAFETY INSTRUCTION

When using the electrical appliance, the below basic safety precautions should be followed:

1. Read all instructions.
2. Before using check that the voltage power corresponds to the one shown on the appliance nameplate.
3. Do not let the cord hang over the edge of the table or counter.
4. Do not place on or near a hot gas or electric burner or in a heated oven.
5. Do not operate any appliance with a damaged cord or plug or after the appliance malfunction or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
6. If the supply cord is damaged it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
7. Always disconnect the blender from the supply if it is left unattended and before assembling, disassembling, or cleaning.
8. Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use.
9. Avoid contacting moving parts.
10. Do not leave foreign objects, such as spoons, forks, knives, or the measuring cup, in the jar as this will damage the blades and other components when starting the machine and may cause injury.
11. Care shall be taken when handling the sharp cutting blades, emptying the bowl, and cleaning
12. The use of attachments, including jars, and jar lids, not recommended or sold by the manufacturer may cause fire, electric shock or injury.
13. Never use hot liquids or run the appliance empty.
14. To protect against the risk of electrical shock do not put the motor unit or power cord in water or other liquid.
15. Keep hands and utensils out of the jar while blending to reduce the risk of severe injury to persons or damage to the blender.
16. If scraping is necessary, turn the power OFF, unplug from the electrical outlet, and use a rubber spatula only.
17. Always operate the blender with the lid in place.
18. Never put non-food items into the jar for blending.
19. Do not open the lid before the blade stops running completely to avoid hazards.
20. Do not put your hands or other objects into the jar during work.
21. Appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
22. Children shall not play with the appliance
23. Misuse may cause potential injury.
24. Do not use outdoors.
25. Save this instruction.

HOUSEHOLD USE ONLY

KNOW YOUR BLENDER

FOR THE INITIAL USE

1. Unpack the appliance and place all parts on a horizontal surface.
2. Immerse the jar, jar lid, and measuring cup in warm soapy water and rinse them and dry them. Never immerse the motor unit in water for cleaning to prevent the risk of electric shock.

CAUTION! The blade is very sharp, please handle it carefully.

OPERATION

Vegetable/fruit juice

1. Lay the appliance on a flat horizontal surface and make sure it is unplugged and the “Speed knob” turns to
   “OFF” position before operating.

2. Prepare the vegetable/fruit well, take carrot for example. Firstly, peel the carrot and cut it into cubes with a size of 15mm15mm15mm, then remove the measuring cup and jar lid, after it, put the carrot cubes into the jar. Usually, a certain amount of purified water has to be added to facilitate the smooth running of the appliance. The proportion of the carrot and water is 2:3. The amount of mixture should not exceed the maximum level as indicated on the jar.
   NOTE: Never use hot liquids or run the appliance empty.

3. Close the jar lid and measuring cup well in the position. The jar lid must be closed well in position, or the appliance can not be activated.

4. Install the jar onto jar base, and make sure that the jar is installed well in the position.

5. Connect the appliance to the power source.

6. Turn the “Speed knob” to the speed settings ranging between “Min” and “Max” at “Speed knob”, the light ring illuminates. And then the appliance starts to work. Alternatively, you can turn the “Speed knob” to the “P” position to make the appliance work at a high speed.
   NOTE: The buttons of “Smoothie”, “Auto-clean” and “Ice crush” are invalid when the appliance is running under the selected speed setting or “P” setting.

7. During working, you can remove the measuring cup and then add ingredients into the jar through the center opening of the jar cover during operation, and then replace the measuring cup.
   NOTE: You’d better not remove the jar from the motor unit during the working process. If it is necessary to remove the jar, please first turn off the appliance to make it stop working and then remove it. CAUTION: Do not operate the appliance for more than 3 minutes per time and a minimum 30-minute rest time must be maintained between continuous two cycles.

8. Turn the “Speed knob” to the “OFF” position once the mixture has been blended to your desired consistency.

9. Unplug the appliance and then remove the jar from the motor unit, carefully remove the jar cover, then pour and serve.
   CAUTION: The appliance must be unplugged before removing the jar.

Smoothie

1. Lay the appliance on a flat horizontal surface and make sure it is unplugged and the “Speed knob” turns to the “OFF” position before operating.

2. Put the ingredients into the jar, and make sure the number of ingredients should not exceed the maximum level as indicated on the jar.
   NOTE: Never use hot liquids or run the appliance empty.

3. Close the jar lid and measuring cup well in the position. The jar lid must be closed well in position, or the appliance can not be activated.

4. Install the jar onto the jar base, and make sure that the jar is installed well in its position.

5. Connect the appliance to the power source.

6. Turn the “Speed knob” to the “ON” position, and the indicators of three buttons blink. And then press the “Smoothie” button, its corresponding indicator lights solidly, then the appliance starts to work.
   NOTE: The speed can not be adjusted by the “Speed knob” when the appliance is running under the “Smoothie” mode.
   NOTE: During the working process of making a smoothie, if you want to make the appliance stops working, you can press the “Smoothie” button again or turn the “Speed knob” to the “OFF” position.

7. During working, you can remove the measuring cup and then add ingredients into the jar through the center opening of the jar cover during operation, and then replace the measuring cup.
   NOTE: You’d better not remove the jar from the motor unit during the working process. If it is necessary to remove the jar, please first turn off the appliance to make it stop working and then remove it.
   CAUTION: Do not operate the appliance for more than 3 minutes per time and a minimum 30-minute rest time must be maintained between continuous two cycles.

8. After finishing making the smoothie, the appliance will stop working automatically and the indicators of three buttons will turn to blink.

9. Unplug the appliance and then remove the jar from the motor unit, carefully remove the jar cover, then pour and serve.
   CAUTION: The appliance must be unplugged before removing the jar.

Ice crush

1. Lay the appliance on a flat horizontal surface and make sure it is unplugged and the “Speed knob” turns to the “OFF” position before operating.

2. Prepare some ice cubes with a size of 15mm15mm15mm, then remove the measuring cup and jar lid, after it, put the ice cubes into the jar. Usually, a certain amount of purified water has to be added to facilitate the smooth running of the appliance. The proportion of the ice and water is 2:3. The amount of mixture should not exceed the maximum level as indicated on the jar.

3. Close the jar lid and measuring cup well in the position. The jar lid must be closed well in position, or the appliance can not be activated.

4. Install the jar onto the jar base, and make sure that the jar is installed well in the position

5. Connect the appliance to the power source.

6. Turn the “Speed knob” to the “ON” position, and the indicators of three buttons blink. And then press the “Ice crush” button, its corresponding indicator lights solidly, then the appliance starts to work. NOTE: The speed can not be adjusted by the “Speed knob” when the appliance is running under the “Ice crush” mode.
   NOTE: During the working process of crushing ice, if you want to make the appliance stops working, you can press the “Ice crush” button again or turn the “Speed knob” to the “OFF” position.

7. During working, you can remove the measuring cup and then add ingredients into the jar through the center opening of the jar cover during operation, and then replace the measuring cup.
   NOTE: You’d better not remove the jar from the motor unit during the working process. If it is necessary to remove the jar, please first turn off the appliance to make it stop working and then remove it.
   CAUTION: Do not operate the appliance for more than 3 minutes per time and a minimum 30-minute rest time must be maintained between continuous two cycles.

8. After finishing crushing ice, the appliance will stop working automatically and the indicators of three buttons will turn to blink.

9. Unplug the appliance and then remove the jar from the motor unit, carefully remove

CLEANING AND MAINTENANCE

Before cleaning, make sure the appliance is unplugged and the “Speed knob” turns to the “OFF” position.

1. The Auto-clean feature can help to clean the blender and blade assembly easily and rapidly in complete safety.
   Follow the operation of (1)-(4) as below to perform the auto-clean function.
   (1) After use, reassemble the jar and pour about 400-500ml warm water into it.
   (2) Turn the “Speed knob” to the “ON” position, and the indicators of the three buttons blink. And then press the “Auto-clean” button once, its corresponding indicator lights solidly, then the appliance starts to perform auto cleaning.
   (3) After finishing cleaning, the appliance will stop working automatically and the indicators of three buttons will turn to blink.
   (4) Unplug the appliance and then remove the jar from the motor unit, then rinse the jar under running water.

2. Wiping the outer surface of the motor unit with a damp cloth, do not use abrasive cleaners. Never immerse in water or other solution for cleaning.

3. All parts except the motor unit are dishwasher-safe. You can also wash the parts, except the motor unit, in warm, soapy water.

4. Dry all parts and then reassemble them again. But store the appliance with the jar lid not be closed completely to allow air to circulate and prevent jar odors.

5. If any problem has been encountered during use, never disassemble the Motor Unit by yourself, there are no user-serviceable parts inside. Contact only the authorized service facility for examination and repair.

WARNING!

1. The blade is very sharp, handle it carefully when cleaning the appliance.
2. Do not use abrasive cleaners. Never immerse the Motor Unit in water for cleaning.

TECHNICAL SPECIFICATION
Voltage: AC 220V – 240V~
Frequency: 50Hz-60Hz
Power: 1400W
Capacity: 1.75L

Correct Disposal of this product:
**** This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased, they can take this product for environmentally safe recycling

tesla.info

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>