DELTA MDZ-KB Mounting Desk into Thermal Insulation User Manual
- June 11, 2024
- Delta
Table of Contents
DELTA MDZ-KB Mounting Desk into Thermal Insulation
Product Information
The MDZ-KB Mounting Desk is designed for installing electrical devices such as outdoor lights and motion sensors on thermally insulated building facades with a thickness ranging from 50 to 200 mm. The device is manufactured by KOPOS and comes with a 2-year guarantee.
- Number of Sections : 1
- Voltage Insulation: ~ 400 V
- Main Features: Self-extinguishing, Elimination of thermal bridging
- Material: Not specified
- Color: Light gray
- Weight: 0.222 kg
- The thickness of the Insulating Layer: 50 … 200 mm
- Dimensions: 119 x 119 x 20 mm (mounting desk) / 120 x 120 x 200 mm (carrier)
Product Usage Instructions
Before installing the MDZ-KB Mounting Desk, it is necessary to cut the carrier including the enclosed insulation to the required length according to the thickness of the insulating layer. Follow the below instructions to mount the device:
- Ensure that the device is secured against contact with caustic, staining, and viscous fluids.
- Fix the carrier onto the thermally insulated building facade using appropriate screws and anchors.
- Attach the mounting desk onto the carrier using screws.
- Install the electrical device onto the mounting desk as per the manufacturer’s instructions.
Note: Refer to the user manual for additional information and safety measures.
Warning!
Please read the user manual included in this work as it contains important
information related with safety of installation and use of the device. Only
persons who read the user manual may use the device. The user manual must be
kept because it may be required in the future. The device is to be used
exclusively for purposes specified in this user manual. The device must be
unpacked prior to starting-up. After removing the packaging make sure the
device is in working order. If the product has defects, it should not be used
until it is repaired. The product is intended for use at home and commercial
use and may not be used for other than intended use. The manufacturer is not
liable for damages resulting from not adhering to the rules contained in the
user manual, therefore, we recommend to follow the aforementioned safety rules
for operation and maintenance of the device. In this way you will ensure
yourself safety and avoid causing damage to the device. The manufacturer and
the supplier are not liable for losses or damages arising out of the product,
including financial or intangible losses, loss of profits, income, data,
pleasure from use of the product or other products related with it – indirect,
incidental or consequential loss or damage.
The above provisions apply whether the loss or damage concerns:
- Deterioration of quality or the lack of operation of the products or products related with it due to damage as well as the lack of access to the product when it is undergoing repair, which results in stoppage the loss of user’s time or a break in business activity;
- Improper results of operation of the product or products related with it;
- It applies to losses and damages according to any legal category, including negligence and other losses, termination of a contract, expressed or implied guarantee and strict liability (even if the manufacturer or the supplier was notified about the possibility of occurrence of such damages).
safety measures:
Particular attention at designing was directed to quality standards of the
device where ensuring safety of operation is the most important factor. The
device must be secured against contact with caustic, staining and viscous
fluids.
Mounting desk for installing electrical devices (eg outdoor lights, motion sensors, etc.) on thermally insulated buildings facades with a thickness from 50 to 200 mm. The robust construction. Elimination of thermal bridging. Before installing, it is necessary to cut the carrier including the enclosed insulation to the required length according to the thickness of the insulating layer.
MOUNTING DESK INTO THERMAL INSULATION MDZ-KB KOPOS
| Number of sections: | 1 |
|---|---|
| Voltage insulation: | ~ 400 V |
Main features:
| • for insulating systems
• temperature range : -25 °C … 60 °C
• load 40 N – 180 mm from wall
• flammability index : 850 °C
• Expansion plugs, Mounting screws – included
Material:| Self-extinguishing
Color:| Light gray
Weight:| 0.222 kg
Thickness of the insulating layer:| 50 … 200 mm
Dimensions:
| 119 x 119 x 20 mm (mounting desk)
120 x 120 x 200 mm (carrier)
Manufacturer / Brand:| KOPOS
Guarantee:| 2 years
**Dimensions
**
Method of mounting:
**In the kit
**
PACKAGE
- Dimensions (L x W x H): 0x0x0 mm
- Gross Weight: 0 kg
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań;
Graniczna 10
e-mail: [email protected];
tel: +(48) 61 864 69 60