iOttie vlxwcg211 Velox Magnetic Wireless Charger Mini Air Vent Mount User Manual

June 11, 2024
iOttie

iOttie-LOGO

iOttie vlxwcg211 Velox Magnetic Wireless Charger Mini Air Vent Mount

iOttie-vlxwcg211-Velox-Magnetic-Wireless-Charger-Mini-Air-Vent-Mount-
PRODUCT

Product Information

The Velox Magnetic Wireless Charger Mini Air Vent Mount is a device designed to charge your MagSafe Compatible iPhone while driving. The mount is attached to the air vent of your vehicle and securely holds your phone in place with magnets.

At a Glance

  • Vent Clip
  • Compatible with MagSafe Compatible iPhones and cases (iPhone series 12 and later)
  • Wireless Charger Output: 7.5 W
  • Cable Length: 4
  • Mount Length: 2.22
  • Mount Width: 2.61
  • Mount Height: 3.58
  • Mount Weight: 5 oz.

Device Compatibility

The Velox Magnetic Wireless Charger Mini Air Vent Mount is designed for use with MagSafe Compatible iPhones and cases only. Compatible devices include the iPhone series 12 and later.

Product Specifications

Item Specification
Total Input DC 9.0V-1.67A DC 5.0V-2.0A
Wireless Charger Output 7.5 W
Cable Length 4
Mount Length 2.22
Mount Width 2.61
Mount Height 3.58
Mount Weight 5 oz.

Product Usage Instructions

Attaching the Mount

To attach the Velox Magnetic Wireless Charger Mini Air Vent Mount to your vehicle, simply push the mount onto the blade of your vehicle’s air vent. The silicon texture of the prongs will ensure that the mount does not fall off even when driving on rough roads.
Note that the mount is designed to be used only with FLAT air vent blades.

Connecting to Power

To connect the mount to power, connect the USB-C cable to your vehicle’s USB-C port or auxiliary power outlet via a 10W adapter.
Note that the Velox Mini does not have an On/Off switch. Once the cable is plugged in and the vehicle is turned on, the mount will stay on.

Mounting Your Phone

To mount your phone, simply place your MagSafe Compatible iPhone against the mount and the magnets will hold it in place. Charging will start automatically. You are now ready to start driving.

Index
For optimal mounting and charging, please follow the detailed instructions within this manual when using the Velox Mini Wireless Air Vent Mount.

Product Information

At a GlanceiOttie-vlxwcg211-Velox-Magnetic-Wireless-Charger-Mini-Air-
Vent-Mount-fig- \(1\)

Device Compatibility

Velox products are designed for use with MagSafe Compatible iPhones and cases. Compatible devices include the iPhone series 12 and later.iOttie-vlxwcg211
-Velox-Magnetic-Wireless-Charger-Mini-Air-Vent-Mount-fig-
\(2\)

Product Specifications

Item Specification

Total Input

| DC 9.0V-1.67A DC 5.0V-2.0A
Wireless Charger Output|

7.5 W

Cable Length| 4′
Mount Length| 2.22″
Mount Width| 2.61″
Mount Height| 3.58″
Mount Weight| 5 oz.

iOttie is not liable for possible damages due to product misuse.

Installation

Attaching the Mount

Simply push the Velox mount onto the blade of your vehicle’s air vent. The silicon texture of the prongs will ensure that the mount does not fall off even when driving on rough roads.

Mount is designed to be used only with FLAT air vent blades.

Connecting to Power

Connect the USB-C cable to your vehicle’s USB-C port or auxiliary power outlet via an 10W adapter.iOttie-vlxwcg211-Velox-Magnetic-Wireless-Charger-Mini-
Air-Vent-Mount-fig- \(5\)

The Velox Mini does not have an On/Off switch. Once the cable is plugged in and the vehicle is turned on, the mount will stay on.

Mounting Your Phone

Simply place your phone against the mount and the magnets will hold it in place. charging will start automatically. You are now ready to start driving.

FCC

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

  • Operating temperature : -10-55°C
  • Operating frequency range : 2402-2480MHz
  • Rated Power : For Classic: 9.1dBm, BLE: 8.1dBm

Declaration of Conformity:

Hereby, iOttie, Inc. declares that the radio equipment type Velox Magnetic Wireless Charging Air Vent Mount of MGSFIO101 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.iottie.com
This device may be used in each EU member state.

Important Safety Information

This manual contains important safety and operating instructions for the Velox™ Magnetic Wireless Charger Mini Air Vent Mount.
Please read all instructions and safety information before using this product. If damage occurs as a result of failure to follow the instructions, the warranty will be voided.

  • Do not expose to rain, moisture, or snow.
  • Using an attachment made or sold by anyone other than the manufacturer is not recommended, doing so may result in an increased risk of fire, electric shock, or injury.
  • Do not operate this magnetic wireless charging mount if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
  • Do not disassemble this magnetic wireless charging mount; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in electric shock or fire.
  • To reduce the risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off the vehicle controls will not reduce this risk.
  • Avoid extended exposure to direct sunlight, which may damage the device.
  • Exposing this product to open flames may cause it to explode.
  • Do not expose this product to strong magnetic fields.
  • Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.

Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving.

RECYCLE

  • This product complies with the radio interference requirements of the European Community.
  • This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
  • This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop you bought this product.

Designed in New York City. 470 7th Ave., New York, NY 10018. Made in China. U.S. Patent Pending ©2023 iOttie. All rights reserved. iOttie and Velox are registered trademarks owned by iOttie, Inc. John 3:16
Apple, the Apple logo, iPhone, iPod, iPod touch, Mac, macOS, Magsafe and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.

Warranty

The Velox Mini Wireless Air Vent Mount is backed by a 2 year warranty.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals