LG OLED48C3 Series OLED TV User Manual
- June 12, 2024
- LG
Table of Contents
LG OLED48C3 Series OLED TV
Product Information
The product is an OLED TV with the model name OLED48C3### Series. It is a type of OLED TV with a conceptual design and dismantling process similar to the OLED48C3### model. The product contains various materials and components that require selective treatment during disposal. These include printed circuit boards (PCB) or printed circuit assemblies (PCA), batteries, mercury- containing components, liquid crystal displays (LCD) or OLED modules with a surface greater than 100 square cm, remote control with internal coin batteries, display backlights, capacitors/condensers, power cords, gas discharge lamps, plastics containing brominated flame retardants, components and waste containing asbestos, components, parts, and materials containing refractory ceramic fibers, and components, parts, and materials containing radioactive substances. When disposing of the product, it is important to follow the guidelines and regulations set forth by Directive 2012/19/EU. The product should be stored in a weatherproof manner, using containers with covers for storage and transportation.
Product Usage Instructions
Tools Required
- Screwdriver
- Nipper
Product Dismantling Process
Batteries
To remove the batteries from the remote control:
- Remove the back cover of the remote control.
- Easily remove the batteries.
PCBs and OLED Module
To dismantle the PCBs and OLED module:
- Remove the back cover of the display using your hand and a screwdriver.
- Once removed, the accessible electronic units (PCBs) will be exposed.
- Remove the electronic units using your hand and a screwdriver.
- After removing all other parts, such as speaker units and metal components, the OLED module will be left.
- Remove the OLED module.
Power Cord
To remove the power cord:
- Disconnect the power cord from the product.
Capacitors > 25 mm
To remove capacitors measuring greater than 25 mm:
- Locate the capacitors in the power supply units.
- Use a nipper to remove the capacitors.
Dismantling information
The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of LG products to remove components and materials requiring selective treatment.
Product Identification
| Type of Product | OLED TV |
|---|---|
| Model name | OLED48C3### Series. |
This document covers derivation model OLED48C3### which has same conceptual design and dismantling process.
Displays must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/19/EU and must, amongst other things, be stored in a weatherproof manner. Containers with covers must be used when storing and transporting the Displays.
Materials and components for Selective Treatment
Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
| Materials and components | Notes | Included |
|---|---|---|
| Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) | With a | |
| surface greater than 10 square cm | O |
(main, power, T-con, IR, Wi fi)
Batteries
| For Remote control| O
Internal coin batteries| –
Mercury containing components| display backlights| –
Liquid Crystal Displays (LCD) with a surface greater than 100 square cm
(or OLED module for OLED TV)
| Includes background illuminated displays with gas discharge lamps|
O
Capacitors / condensers (Containing PCB / PCT)| | –
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter
or height| |
O
External electric cables cords| Power cord| O
Gas Discharge Lamps| | –
Plastics containing Brominated Flame Retardants| | –
Components and waste containing asbestos| | –
Components, parts and materials containing refractory ceramic fibers| | –
Components, parts and materials containing
radioactive substances
| | –
Tools Required
List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
Product Dismantling Process
Batteries
Batteries can easily be removed from the remote control once the back cover
of the remote control has been removed.
PCBs and OLED Module
The back cover of the display can easily be removed by hand and screw
driver.
Once removed, this will expose the accessible electronic units (PCBs) which can now be easily removed with hand and screw driver.
OLED (together with their casing) is only left after all other parts like electronic units have been removed.
Power cord
Capacitors > 25 mm
Capacitors > 25 mm are located in the power supply units and can be removed
by nipper
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>