PANDUIT CTAPR2-2 Compression Tap With Anti Oxidant Instruction Manual
- June 17, 2024
- PANDUIT
Table of Contents
PANDUIT CTAPR2-2 Compression Tap With Anti Oxidant
Product Information
Specifications
- Main: Wire or Ground Rod
- Type: Compression Taps with Anti-Oxidant
- Part Numbers:
- CTAPR2-2
- CTAPR2/0-2
- CTAPR2/0-2/0
- CTAPR250-2/0
- CTAPR250-250
- CTAPR500-2/0
- CTAPR500-250
- CTAPR500-500
- Copper Conductor Range:
- Main (AWG): 6 STR – 2 STR / 6 SOL – 1 SOL
- Main (Metric): 16mm – 25mm / 16mm SOL – 35mm SOL
- Rod Diameter: 6.4mm – 17.22mm
Product Usage Instructions
Installation Steps:
- Clean the cables before installation.
- Identify the appropriate tap based on your conductor range and rod diameter.
- Use the specified crimping tool and die based on the tap part number.
- Crimp the tap onto the wire or ground rod as shown in the orientation diagrams.
Recommended Tools:
- Panduit Tool:
- 12-Ton for CTAPR2-2, CTAPR2/0-2, CTAPR2/0-2/0
- 14-Ton for CTAPR250-2/0, CTAPR250-250
- 15-Ton for CTAPR500-2/0, CTAPR500-250, CTAPR500-500
- Crimping Dies:
- CD-920-C PC (1 crimp)
- CD-930G-250 PG25 (1 crimp)
- CD-920C-500 P500 (2 or 3 crimps)
FAQ
-
Can I install CTAPR500-500 with any crimping tool?
No, CTAPR500-500 cannot be installed with the CT-930CH or the CT-930 tool. Use die adaptor CD-940-DA with compatible tools. -
Where can I find instructions in local languages?
For instructions in local languages and technical support, visit www.panduit.com/resources/install_maintain.asp.
PART NUMBER
| PART NUMBER | MAIN (AWG) | TAP (AWG) | MAIN (METRIC) | TAP (METRIC) |
|---|---|---|---|---|
| COPPER CONDUCTOR RANGE | ROD DIAMETER | COPPER CONDUCTOR RANGE | COPPER CONDUCTOR | |
| RANGE | ROD DIAMETER | COPPER CONDUCTOR RANGE | ||
| CTAPR2-2 | 6 STR – 2 STR |
6 SOL – 1 SOL
| 1/4″ COPPER
GROUND ROD
| 6 STR – 2 STR
6 SOL – 1 SOL
| 2 2
16mm – 25mm
2 2
16mm SOL – 35mm SOL
| 6.4 mm COPPER
GROUND ROD
| 2 2
16mm – 25mm
2 2
16mm SOL – 35mm SOL
CTAPR2/0-2| 1 STR – 2/0 STR| 3/8″ COPPER CLAD GROUND ROD| 6 STR – 2 STR
6 SOL – 1 SOL
| 2
50mm
| 9.0 mm COPPER CLAD GROUND ROD| 2 2
16mm – 25mm
2 2
16mm SOL – 35mm SOL
CTAPR2/0-2/0| 1 STR – 2/0 STR| 3/8″ COPPER CLAD GROUND ROD| 1 STR – 2/0 STR| 2
50mm
| 9.0 mm COPPER CLAD GROUND ROD| 2
50mm
CTAPR250-2/0| 3/0 STR – 250 kcmil| 1/2″ – 5/8″ COPPER CLAD GROUND ROD| 6 STR – 2/0 STR
6 SOL – 3/0 SOL
| 2 2
95mm -120mm
| 12.8 mm – 14.2 mm COPPER CLAD GROUND ROD| 2 2
16mm – 50mm
2 2
16mm SOL – 70mm SOL
CTAPR250-250| 3/0 STR – 250 kcmil| 1/2″ – 5/8″ COPPER CLAD GROUND ROD| 3/0 STR – 250 kcmil| 2 2
95mm -120mm
| 12.8 mm – 14.2 mm COPPER CLAD GROUND ROD| 2 2
95mm -120mm
CTAPR500-2/0| 300 kcmil – 500 kcmil| 3/4″ COPPER
GROUND ROD
| 6 STR – 2/0 STR
6 SOL – 3/0 SOL
| 2 2
185mm – 240mm
| 17.2 mm COPPER
GROUND ROD
| 2 2
16mm – 50mm
2 2
16mm SOL – 70mm SOL
CTAPR500-250| 300 kcmil – 500 kcmil| 3/4″ COPPER
GROUND ROD
| 3/0 STR-250 kcmil
| 2 2
185mm – 240mm
| 17.22 mm COPPER
GROUND ROD
| 2 2
95mm -120mm
CTAPR500-500| 300 kcmil – 500 kcmil| —| 300 kcmil – 500 kcmil| 2 2
185mm – 240mm
| —| 2 2
185mm – 240mm
*GROUND ROD MAY ONLY BE ASSEMBLED WITH 4/0 STR WIRE
OVERVIEW
INSTALLATION INSTRUCTIONS
WHEN CRIMPING WITH CD-930G-250 DIE, ORIENT PART AS SHOWN.
ORIENT CRIMPS AS SHOWN WHEN CRIMPING WITH THE CD-920C-500 DIE.
| PANDUIT PART NUMBER | PANDUIT TOOL |
|---|---|
| 12-TON | 14-TON |
| A. SEE TOOL LIST BELOW | B. SEE TOOL LIST BELOW |
LIST BELOW
DIE PART NUMBER DIE INDEX (# OF CRIMPS)
CTAPR2-2| CD-920-C PC (1)
CTAPR2/0-2| CD-920-O PO (1)
CTAPR2/0-2/0| CD-920-O PO (1)
CTAPR250-2/0| CD-930G-250 PG25 (1)
CTAPR250-250| CD-930G-250 PG25 (1)
CTAPR500-2/0| CD-920C-500 P500 (2)
CTAPR500-250| CD-920C-500 P500 (2)
CTAPR500-500| CD-920C-500 P500 (3)
-
A. CT-920, CT-920/CV, CT-920CH, CT-920CH/CV, CT-920CH/CCP, CT-2920, CT-2920/CCP, CT-2920/CCPINT, CT-2920/CCPUK, CT-2920/CCPAUS, CT-2920/CCPTO, CT-2920/CCPBT, CT-2931, CT-2931/ST, CT-2931/STINT, CT-2931/STUK, CT-2931/STAUS, CT-2931/TO, CT-2931/STCV, CT-2931/STCVINT, CT-2931/STCVUK, CT-2931/STCVAUS, CT-2931/CVTO, CT-2931/STBT
NOTE: CTAPR500-500 AND CTAPR500-250 CAN NOT BE INSTALLED WITH CT-2920, CT-2920/CCP, CT-2920/CCPINT, CT-2920/CCPUK, CT-2920/CCPAUS, CT-2920/CCPTO WHEN INSTALLING THE CTAPR PARTS WITH THE CT-920CH, USE BLACKFIN TOOL ONLY -
B. CT-930, CT-930CH, CT-2930, CT-2930/L, CT-2930/LE
NOTE: CTAPR500-500 CANNOT BE INSTALLED WITH THE CT-930CH OR THE CT-930 -
C. USE DIE ADAPTOR CD-940-DA: CT-940CH/BJO, CT-2940, CT-2940/L, CT-2940/LE
For Instructions in Local Languages and Technical Support:www.panduit.com/resources/install_maintain.asp
E-mail: cs@panduit.com
Fax: 708-444-6993
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>