PPI ScanLog 16 Channel Recorder and Pen-Drive Interface Instruction Manual
- June 11, 2024
- PPI
Table of Contents
- ScanLog 16 Channel Recorder and Pen-Drive Interface
- OPERATOR PARAMETERS
- ALARM SETTINGS
- DEVICE CONFIGURATION
- CHANNEL CONFIGURATION
- ALARM CONFIGURATION
- RECORDER CONFIGURATION
- FRONT PANEL KEYS
- SCROLLING THROUGH VARIOUS SCREENS
- VIEWING ALARM STATUS SCREEN
- ELECTRICAL CONNECTIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ScanLog (Pen Drive)
4 / 8 / 16 Channel Recorder + Pen-Drive Interface
Operation Manual
ScanLog 16 Channel Recorder and Pen-Drive Interface
This brief manual is primarily meant for quick reference to wiring connections and parameter searching. For more details on operation and application; please log on to www.ppiindia.net
OPERATOR PARAMETERS
| Parameters | Settings |
|---|---|
| Stop Copy | No Yes |
| Select Option | 1. None |
2. Copy (New)
3. Re-copy (Old)
4. Read Chan Names
5. Recover
(Default : None)
Batch Start| No Yes
Balance Slot Time| Read Only
Batch Stop| No Yes
ALARM SETTINGS
| Parameters | Settings (Default Value) |
|---|---|
| Select Channel | Pen Drive Version For 4C : Channel-1 to |
Channel-4
For 8C : Channel-1 to
Channel-8
For 16C : Channel-1 to
Channel-16
Select Alarm| AL1, AL2, AL3, AL4
(The actual available options depends on the numbers of Alarms set per channel
on
Alarm configuration page)
AL1 Type| None Process Low Process High (Default : None)
AL1 Setpoint| Min. to Max. of selected input type range
(Default : 0)
AL1 Hysteresis| 1 to 30000
(Default : 20)
AL1 Inhibit| No Yes
(Default : No)
DEVICE CONFIGURATION
| Parameters | Settings (Default Value) |
|---|---|
| Delete Records | No Yes |
(Default : No)
CHANNEL CONFIGURATION
| Parameters | Settings (Default Value) |
|---|---|
| All Chan Common | No Yes |
(Default : No)
Select Channel| Pen Drive Version For 4C : Channel-1 to Channel-4
For 8C : Channel-1 to
Channel-8
For 16C : Channel-1 to
Channel-16
Parameters| Settings (Default Value)
Input Type| Refer Table 1
(Default : 0 to 10 V)
Resolution| Refer Table 1
Signal Low| | Input Type| Settings| Default
---|---|---
0 to 20mA| 0.00 to Signal High| 0
4 to 20mA| 4.00 to Signal High| 4
0 to 80mV| 0.00 to Signal High| 0
0 to 1.25V| 0.000 to Signal High| 0
0 to 5V| 0.000 to Signal High| 0
0 to 10V| 0.00 to Signal High| 0
1 to 5V| 1.000 to Signal High| 1
Signal High| | Input Type| Settings| Default
---|---|---
0 to 20mA| Signal Low to 20.00| 20
4 to 20mA| Signal Low to 20.00| 20
0 to 80mV| Signal Low to 80.00| 80
0 to 1.25V| Signal Low to 1.250| 1.25
0 to 5V| Signal Low to 5.000| 5
0 to 10V| Signal Low to 10.00| 10
1 to 5V| Signal Low to 5.000| 5
Range Low| -30000 to +30000
(Default : 0)
Range High| -30000 to +30000
(Default : 1000)
Low Clipping| Disable Enable
(Default : Disable)
Low Clip Val| -30000 to High Clip Val (Default : 0)
High Clipping| Disable Enable
(Default : Disable)
High Clip Val| Low Clip Val to 30000 (Default : 1000)
Zero Offset| -30000 to +30000
(Default : 0)
ALARM CONFIGURATION
| Parameters | Settings (Default Value) |
|---|---|
| Alarms/chan | 1 to 4 |
(Default : 4)
RECORDER CONFIGURATION
| Parameters | Settings (Default Value) |
|---|---|
| Normal Interval | 0:00:00 (H:MM:SS) **to |
2:30:00 (H:MM:SS)
(Default : 0:00:30)
Zoom Interval| 0:00:00 (H:MM:SS) to
2:30:00 (H:MM:SS)
(Default : 0:00:10)
Alrm Toggl Rec| Disable Enable
(Default : Enable)
Recording Mode| Continuous Batch
(Default : Continuous)
Batch Time| 0:01 (HH:MM) to
250:00 (HHH:MM)
(Default : 1:00)
Batch Start Batch Stop**| No Yes
RTC SETTING
| Parameters | Settings |
|---|---|
| Time (HH:MM) | 0.0 to 23:59 |
| Date | 1 to 31 |
| Month | 1 to 12 |
| Year | 2000 to 2099 |
| Unique ID Number | Read Only |
UTILITIES
| Parameters | Settings (Default Value) |
|---|---|
| Lock Unlock | No Yes |
(Default : No)
Factory Default| No Yes
(Default : No)
TABLE 1
Option| Range (Min. to Max.)| Resolution & Unit
Type J (Fe-K)| 0.0 to +960.0°C| 1 °C or 0.1 °C
Type K (Cr-Al)| -200.0 to +1376.0°C
Type T (Cu-Con)| -200.0 to +387.0°C
Type R (Rh-13%)| 0.0 to +1771.0°C
Type S (Rh-10%)| 0.0 to +1768.0°C
Type B| 0.0 to +1826.0°C
Type N| 0.0 to +1314.0°C
Reserved for customer specific Thermocouple type not listed above. The type
shall be specified in accordance with the ordered (optional on request)
Thermocouple type.
RTD Pt100| -199.9 to +600.0°C| 1°C or 0.1 °C
0 to 20 mA| -30000 to 30000 units| 1
0.1
0.01
0.001
units
4 to 20 mA
0 to 80 mV
Reserved
0 to 1.25 V| -30000 to 30000 units
0 to 5 V
0 to 10 V
1 to 5 V
FRONT PANEL KEYS
FRONT PANEL KEYS
Symbol| Key| Function
****| Scroll| Press to scroll through various Process Information Screens in
Normal Operation Mode.
| Alarm Acknowledge| Press to acknowledge / mute alarm output (if active) &
to view Alarm Status screen.
| DOWN| Press to decrease the parameter value. Pressing once decreases
the value by one count; keeping pressed speeds up the change.
| UP| Press to increase the parameter value. Pressing once increases the
value by one count; keeping pressed speeds up the change.
| SET-UP|
Press to enter or exit set-up mode.
**| ENTER| In Run Mode, press to toggle between Auto & Manual Scan Mode.
(Only for 16 Channel version)
** In Set-up Mode, press to store the set parameter value and to scroll to the
next parameter.
SCROLLING THROUGH VARIOUS SCREENS
The screen shown below are for 4 Channel Version. The sequence is the same for 8 & 16 Channel Version.
VIEWING ALARM STATUS SCREEN
16 Channel With Alarm Relay Outputs
ELECTRICAL CONNECTIONS
101, Diamond Industrial Estate, Navghar,
Vasai Road (E), Dist. Palghar – 401 210.
Sales : 8208199048 / 8208141446
Support : 07498799226 / 08767395333
E: sales@ppiindia.net,
support@ppiindia.net
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>