FERM CDA1167 20v-2.0AH Li-Ion Battery Instruction Manual
- June 9, 2024
- FERM
Table of Contents
CDA1167 20v-2.0AH Li-Ion Battery
Instruction Manual
20V – 2.0AH
LI-ION BATTERY
CDA1167
CDA1167 20v-2.0AH Li-Ion Battery
SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:
| Read the user manual.
---|---
| Denotes risk of personal injury, loss of life
or damage to the tool in case of nonobservance of the instructions in this
manual.
| Max temperature 45°C.
| Do not throw the battery into fire.
| Do not throw the battery into water.
| Do not dispose of the product in unsuitable containers.
| Separate collection for Li-ion battery.
| The product is in accordance with the applicable safety standards in the
European directives.
GENERAL SAFETY WARNINGS
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool/battery.
Distractions can cause you to lose control.
BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects that
can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 130 °C may cause explosion. NOTE The
temperature „130 °C“ can be replaced by the temperature „265 °F“.
g) Follow all charging instructions and do not charge the battery pack or tool
outside the temperature range specified in the instructions. Charging
improperly or at temperatures outside the specified range may damage the
battery and increase the risk of fire.
h) Never service damaged battery packs.
Service of battery packs should only be performed by the manufacturer or
authorized service providers.
SAFETY WARNINGS FOR BATTERY
a) Do not open the battery. Danger of shortcircuiting.
b) Protect the battery against heat, e. g., against continuous intense
sunlight, fire, water, and moisture. Danger of explosion.
c) In case of damage and improper use of the battery, vapours may be emitted.
Ventilate the area and seek medical help in case of complaints. The vapours
can irritate the
respiratory system.
d) Use the battery only in conjunction with yourFERM FX-POWER product. This
measure alone protects the battery against dangerous overload.
e) The battery can be damaged by pointed objects such as nails or screwdrivers
or by force applied externally. An internal short circuit can occur and the
battery can burn,
smoke, explode or overheat.
PRODUCT INFORMATION
Intended use
Only use the following FX-POWER 20V battery platform charger. Using any other
charger could cause serious injury or damage the battery.
CDA1169 Charger adapter
CDA1170 Quick charger
The batteries of the FX-POWER 20V battery platform are interchangeable with
all the FERM FX-POWER 20V battery platform tools.
Technical specifications
| Model No | CDA1167 |
|---|---|
| Battery Type | Lithium-Ion |
| Voltage Capacity | 20V |
| Recommended charger | 2.0 Ah |
| Weight | CDA1169, CDA1170 |
| 0.3 kg |
DESCRIPTION
The numbers in the text refer to the diagrams on pages 2.
- Battery unlock button
- Battery LED indicators button
- Battery LED indicators
- Battery
OPERATION
Before any work on the power tool, remove the battery.
The battery must be charged before first use.
Inserting the battery into the machine (Fig. B)
Ensure that the exterior of the battery is clean and dry before connecting to
the charger or machine.
- Insert the battery (4) into the base of the machine as shown in Fig. B.
- Push the battery further forward until it clicks into place.
Removing the battery from the machine (Fig. B)
- Push the battery unlock button (1)
- Pull the battery out of the machine like shown in Fig. B.
Checking the battery charging status (Fig. A)
- To check the battery charge status, push the button (2) on battery shortly.
- The battery has 3 lights indicating the charge level, the more lights that burn, the more charge the battery has left.
- When the lights are not burning it means the battery is empty and must be charged immediately.
When the machine is not being used over a longer period of time it is best to store the battery in charged condition.
MAINTENANCE
Before cleaning and maintenance, always switch off the machine and remove the
battery pack from the machine.
Clean the battery casings regularly with a soft cloth, preferably after each
use. Make sure that the ventilation openings are free of dust and dirt. Remove
very persistent dirt using a soft cloth moistened with soapsuds. Do not use
any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these
will damage the synthetic components.
ENVIRONMENT
Do not dispose of batteries in your normal household waste!
Defective or worn-out rechargeable batteries must be recycled according to
Directive 2006/66/EC. Take the battery pack and/or appliance to a nearby
collection facility.
Please consult your local authorities regarding suitable disposal of worn out
power tools/battery packs.
WARRANTY
FX-POWER products are developed to the highest quality standards and are
guaranteed free of defects in both materials and workmanship for the period
lawfully stipulated starting from the date of original purchase. Should the
product develop any failure during this period due to defective material
and/or workmanship then
contact your FX-POWER dealer directly.
The following circumstances are excluded from this guarantee:
- Repairs and or alterations have been made or attempted to the machine by unauthorized service centers.
- Normal wear and tear.
- The tool has been abused, misused or improperly maintained.
- Non-original spare parts have been used This constitutes the sole warranty made by company either expressed or implied. There are no other warranties expressed or implied which extend beyond the face hereof, herein, including the implied warranties of merchantability and fitness for a particular purpose. In no event shall FX- POWER be liable for any incidental or consequential damages. The dealers remedies shall be limited to repair or replacement of nonconforming units or parts.
The product and the user manual are subject to change. Specifications can be changed without further notice.
DECLARATION OF CONFORMITY PMM1010 – PAINT/CEMENT MIXER
We declare under our sole responsibility that this product is in conformity
with directive 2011/65/EU of the European parliament and of the council of 8
June on the restriction of the use of certain hazardous substances in
electrical and electronic equipment is in conformity and accordance with the
following standards and regulations:
EN 55014-1, EN 55014-2, EN 60745-1, EN ISO 12100
EN 61000-3-2, EN 61000-3-3
2006/42/EC, 2014/30/EU, 2012/19/EU, 2011/65/EU
WWW.FERM.COM
2104-13
©2021 FERM