TESLA BL202B 1.5L Blender User Manual

June 4, 2024
Tesla

TESLA BL202B 1.5L Blender

TESLA-BL202B-1-5L-Blender-product

IMPORTANT SAFETY INSTRUCTION

When using the electrical appliance, the below basic safety precautions should be followed:

  1. Read all instructions.
  2. Before using check that the voltage power corresponds to the one shown on the appliance nameplate.
  3. Do not let the cord hang over the edge of table or counter.
  4. Do not operate any appliance with a damaged cord or plug or after the appliance malfunction or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.
  5. Use by children is not intended but foreseeable, but only allowed with supervision.
  6. Avoid contacting moving parts.
  7. Blades are sharp, so handle carefully.
  8. The use of attachment, including Jar, or lid, not recommended or sold by manufacturer may cause fire, electric shock or injury.
  9. The appliance cannot be used for blending hard and dry substances, otherwise the blade could be blunted.
  10. Switch off the appliance before approaching parts that move in use.
  11. Be sure to turn the switch to 0 positions after each use. Make sure the motor stops completely before disassembling. And the power supply cord plug is removed from the outlet.
  12. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.
  13. Children should be supervised to ensure that they do not play with the appliance.
  14. Do not immerse the Motor Unit into water or other liquids.
  15. Do not use outdoors.
  16. Save these instructions

HOUSEHOLD USE ONLY

KNOW YOUR BLENDER

TESLA-BL202B-1-5L-Blender-fig1

FOR THE INITIAL USE

  1. Unpack the appliance and place all parts on a horizontal surface.
  2. Immerse jar, jar cover in warm soapy water and rinse them and dry. Never immerse the motor unit in water for cleaning to prevent the risk of electric shock.
  3. The correct assembly way will be described in detail in the below sections.

Before assembling the jar, be sure the power cord is unplugged from the power outlet and the Switch button is on the 0 positions. The jar is suitable for making a mixture in which the juice and pulp are mixed.

  1. Place the Jar on the Motor Unit, Turn the jar clockwise until a click will be heard when locked into position properly. Please see Fig.1

NOTE

Make sure the Jar is assembled into the motor unit properly, there is an interlock switch on the position, if the Jar is not assembled properly, the blender will not operate.

Blending fruit and vegetable:

  1. Before attaching the power cord to the outlet, make sure the Switch button is in the 0 position.

  2. Peeled or cored the fruit or vegetables and then cut it into small dice, and put the food piece into the Jar. Usually, a certain amount of purified water has to be added to facilitate the smooth running of the appliance. The proportion of the food and water is 2:3.The amount of mixture should not exceed the max level as indicated on the Jar.
    Note: never use boiling liquids or run the appliance empty. The Jar can be used for breaking up the ice.

  3. Replace the Jar cover on the Jar. Turn the Jar cover into the Jar.

  4. Turn the Switch button to the desired setting, there are two settings: P, 0, and 1,2. Turn the switch to the P position and hold it to the pulse actuate motor for delicate chopping. Release it to return the 0 positions.

  5. The consecutive operation time shall be less than 3 minutes. Minimum 1 minutes rest period is required between two consecutive cycles.

  6. Turn the Switch button to 0 Position once the mixture has been blended to your desired consistency.

  7. Remove the Jar from the Motor Unit (remove it directly upward), carefully take down the Jar cover, then pour and serve.

CLEANING AND MAINTENANCE

  • The Auto Clean feature can clean the blender and blade assembly easily, and rapidly in complete safety.
  • Pour a little warm soapy water into the Jar and turn the Switch button to the P position for a few seconds.
  • Remove the Jar from the motor unit by directly taking it upward and rinse the Jar, and Jar cover under running water.
  • Wiping the outer surface of the Motor Unit with a damp cloth, do not use abrasive cleaners. Never immerse in water for cleaning
  • Dry all parts and then replace them
  • For complete cleaning, you can hold the blade assembly at the bottom of the jar carefully, for it is sharp, take it out by turning coupling on the other side clockwise emphatically (see Fig.2), then put the detachable accessories into Dishwasher for clean, they are dishwasher-safe components, but the temperature setting shall not exceed 70ºC
  • If any problem has been encountered during use never disassemble the Motor Base by yourself, any user-serviceable parts inside. Contact only the authorized service facility for examination and repair.

TECHNICAL SPECIFICATION

  • Voltage: AC 220V – 240V~
  • Frequency: 50Hz-60Hz
  • Power: 500W
  • Capacity: 1.5L

Correct Disposal of this product:
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased, they can take this product for environmental safe recycling.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals