MEDION E62180 Life Bluetooth Headphones User Manual

: June 4, 2024
: MEDION

MEDION E62180 Life Bluetooth Headphones

MEDION E62180 Life Bluetooth Headphones PRODUCT

About this user manual

Thank you for choosing our product. We hope you enjoy using this device.

Read the safety instructions careful-ly before using the device for the first time. Note the warnings on the device and in the user manual.
Always keep the user manual close to hand. If you sell the device or give it away, please ensure that you also pass on this user manual. It is an essential component of the product.

Explanation of symbols

If a block of text is marked with one of the warning symbols listed below, the hazard described in that text must be avoided to prevent the potential con- sequences described there from occurring.

DANGER!
Warning: risk of fatal injury!
WARNING!
Warning: risk of possible fatal injury and/or serious irreversible injuries!
WARNING!
Warning: danger due to loud volume!
NOTICE!
Follow these instructions to pre-vent damage to the device!
Follow the instructions in the user manual!
More detailed information on using the device!
Indoor use
Devices with this symbol are intended solely for in-door use.
CE labelling
Products that feature this symbol meet the requirements of the EU directives (see chapter entitled “Declaration of conformity”).
Symbol for direct current (DC)
Bullet point/information on steps during operation
Instruction to be followed
Safety instructions to be followed

Proper use

The wireless headphones are designed for personal audio playback and can also be used as a Bluetooth® hands-free set. This device is only suitable for use indoors in a dry environment.
The device is only intended for private use and not for industrial/commercial use.
Note that no liability will be accepted if this product is not used for its intended purpose:

Comply with all the information in this user manual, especially the safety in-formation. Any other use is considered improper and can cause personal injury or property damage.

Safety information

WARNING!
Risk of injury!
There is a risk of injury to children and persons with limit-ed physical, sensory or mental abilities (for example, partially
If there are defects
DANGER!
Risk of electric shock!
There is a risk of electric shock due to live parts.

Do not use the headphones or accessories if they are damaged in any way.
Never try to open and/or repair a device component yourself.
Do not modify the device without our prior consent.
Only use replacement parts or accessories that we have supplied or approved.
In the event of any defects or damage to the head-phones or accessories, please contact our Service Centre.

Package contents

DANGER!
Risk of choking and suffocation!
There is a risk of choking and suffocation due to swallowing or inhaling small parts or plastic wrap.

Keep packaging away from children.
Do not allow children to play with the packaging material.
The packaging material is not a toy!
- Remove the product from the packaging and remove all packaging material.
- Check your purchase to ensure that all items are included. If anything is missing, please contact our customer service team within 14 days of purchase.
- Before each use, check the head disabled people or older people with limited physical and mental abilities) or to those without experience and knowledge (such as older children).
Keep the device and its accessories out of the reach of children.
This device can be used by children over the age of 8 and by persons with reduced physical, sensory or mental abilities or by those without experience and/or knowledge, if they are supervised or have been in-structed in the safe use of the device and have under-stood the dangers that result from it.
Children must not be al-lowed to play with the de-vice. Cleaning and user maintenance must not be carried out by children, un-less they are aged 8 or over and are supervised.
Children younger than 8 must be kept away from the device.

DANGER!
Risk of choking and suffocation!
There is a risk of choking and suffocation due to swallowing or inhaling small parts or plastic wrap.

Do not store any of the packaging material used (bags, polystyrene etc.) within the reach of children.
Do not allow children to play with the packaging material. The packaging material is not a toy.
phones and accessories for any damage. Contact our Service team in the event of any damage.

The following items are supplied with your product:

Wireless headphones
Micro USB charging cable
User manual and warranty documents

NOTICE!
Risk of damage!
Risk of damage to the device due to improper use of the device.
Do not expose the device to extreme conditions. Avoid:

high humidity, spray or wet conditions
extremely high or low temperatures
direct sunlight
direct sources of heat (e.g. heaters).

Do not operate the head-phones below +10°C or above +35°C, and do not store them below 0°C or above +45°C.
Prevent the device from coming into contact with moisture, water or spray.
The device is not suitable for use in rooms with high humidity levels (e.g. bath-rooms).
Do not use the device in potentially explosive atmospheres. This includes petrol stations, fuel storage areas and areas where sol-vents are processed, for ex-ample. This device must also not be used in are-as with particle-laden air (for example flour or wood dust).
If the device has been moved from a cold room to a warm room, wait before charging the headphones.

The resulting condensation may damage the device. The device can be operated safely as soon as it has reached room temperature.

All devices that are connected to the headphones must comply with the requirements of the Low Volt-age Directive.

WARNING!
Damage to hearing!
Excessive sound pressure when using earphones and head-phones can result in damage to and/or loss of hearing. Using headphones to listen to a device playing at high volume for an extended period can damage your hearing.

Before pressing play, set the volume to the lowest set-ting.
Start playback and increase the volume to a comfortable level.

WARNING!
Risk of fire!

There is a risk of fire due to im-proper use of the device.

Do not place any objects on the cables as they may be damaged.
Do not expose plug connections to impacts/pressure, e.g. from lateral forces. This could cause internal and external damage to your device.
Do not apply force when connecting cables and plugs and make sure that connectors are the right way round.
Do not crush or bend the cable to avoid cable breaks and short circuit.

Device overview

Headband
Switch the device on/off
Increase volume, play next track
Decrease volume, play previous track
Microphone
Start playback, pause playback/accept calls, reject calls
Operating LED
AUX IN socket (3.5 mm jack)
Micro USB input

Getting started

Remove all packaging materials.

Charging the battery

To charge the integrated battery, connect the headphones to your PC/laptop using the USB charging cable provided.
The operating LED lights up red during charging.
Make sure the headphones are switched off and charge them for at least two hours.
The operating LED turns off when the headphones are fully charged.

Putting the headphones on

Open up the earpieces.
Adjust the headband length so that the headphones fit comfortably on your head.

Switching the headphones on/oﬀ

Press and hold the POWER BUTTON button for approximately 4 seconds to switch on the headphones.
The operating LED lights up blue.
Press and hold the POWER BUTTON button for approximately 4 seconds to switch off the headphones.
The operating LED will light up red to start with and then go off.

When the battery charge is running low, the operating LED will flash red and you will hear a sound through the headphones. You will need to charge the battery quickly if you want to continue using the head-phones.

Connecting the audio output device via Bluetooth®

In Bluetooth mode, you can receive audio signals wirelessly from an external Bluetooth-enabled audio output device. Make sure the two devices are not more than 10 metres apart.
Only one audio output device can be paired with the headphones at a time.

Enable Bluetooth mode on your audio output device.
Press and hold the POWER BUTTON button for approximately 4 seconds until the head-phones switch on.
The headphones switch automatically to Bluetooth pairing mode. The operating LED flashes red and blue alternately.
The device name of the headphones (MD 43369) will be displayed in the device list on your audio output device as soon as the signal is found.
If you are prompted to enter a password for pairing, enter “0000”.
Now connect your Bluetooth-enabled audio output device to the head-phones.

You will find more information about the Bluetooth function of your audio output device in its user manual.
Once the two devices are paired with each other, the operating LED will flash blue and you will hear a sound through the headphones to confirm that they are connected.
When signals are being transmitted via Bluetooth, you can control playback using your audio output device and the operating buttons on the headphones.
Every time the headphones are switched on, they automatically attempt to con- nect to the last audio output device connected via Bluetooth.
Proceed as follows to disconnect an existing Bluetooth connection using the op-erating buttons on the headphones and to switch the headphones back to Blue-tooth pairing mode:

Press and hold the POWER BUTTON button for approximately 2 seconds.
You will hear a sound through the headphones to confirm that the connection has been disconnected and the operating LED will flash red and blue alternately. The headphones are now ready to be paired with a new/different Bluetooth-ena-bled audio output device.

Connecting your audio output device using the audio cable

You can use a 3.5 mm audio cable (not provided) to connect your headphones to any device with a suitable audio connection (3.5 mm jack) and enable audio playback.
To do so, proceed as follows:

Plug the audio cable jack into the AUX IN socket on your headphones and connect the cable to your audio output device.
Start playback on the connected audio output device.

The device is fitted with an integrated rechargeable battery. At the end of its service life, do not dispose of the device in the normal household rubbish. Instead, contact your local authority to find out how to dispose of it in an environmentally friendly manner at collection points for electrical and electronic scrap.
The rechargeable battery is an integral component of the device, which means users cannot replace it themselves.

Technical speciﬁcations

General data

Weight:

| 200 g
Dimensions (WxHxD):|

187 x 161 x 74 mm

Frequency response:

| 20 Hz–20 kHz
Impedance:|

32 ohms

Broadband voltage detection:

|

200 mV

Power supply

USB port (DC IN):

|

5 V 300 mA

Rechargeable battery (integrated)

Battery type:

| Li-ion, 3.7 V, 420 mAh, 1.554 Wh
Battery life:|

Up to 12 hours

Battery charging time:

| Approx. 3 hours

Connections

LINE IN:|

3.5 mm jack

Ambient temperatures

In operation:

| +10°C to +35°C at a relative humidity of (non-condensing) max. 80%
Not in operation:|

0°C to +45°C at a relative humidity of (non-condensing) max. 80%

Bluetooth®

Bluetooth version:

| 5.0
Bluetooth profile:|

A2DP, AVRCP

Frequency range:

| 2402–2480 MHz
Max. transmission power:|

8.0 dBm

Range:

|

Up to 10 metres (depending on environmental conditions)

When signals are being transmitted via a cable, it is not possible to control playback using the operating buttons on the headphones. In this case, you have to rely on the controls on your audio output de-vice.

Operation

Controlling playback

Press the button to start/resume playback.
During playback, press the button to pause playback.
Press and hold the «+ button to play the next track.
Press and hold the -» button to play the previous track.

Setting the volume

Press the «+ button repeatedly to increase the volume.
A signal sounds through the headphones when the maximum volume has been reached.
Keep pressing the -» button to reduce the volume.

Managing calls/hands-free calls

When the headphones are connected to a mobile phone via Bluetooth®, you can manage incoming calls using the operating buttons on the headphones and use the headphones as a hands-free system.

Press the button to accept an incoming call.
Press and hold the button to reject an incoming call.
Press the button during a call to end the call.
Quickly press the button twice to call back the last number you dialed

Troubleshooting

If the device stops working properly, please refer to the troubleshooting table shown below to see if you can resolve the problem yourself.
Never attempt to repair the device yourself. If a repair is necessary, please contact our Service Centre..

Fault

| Possible cause|

Corrective action

---|---|---
Device cannot be switched on or switches off automatically| Low battery charge level|

Charge the headphone battery.

No sound|

Connection fault
Volume set too low

|

Pair your audio output de- vice with the headphones again.
Check that the audio cable is plugged in properly.

|

Check the volume settings on the headphones and your audio output device.

Fault	Possible cause	Corrective action
Sound interference during hands-free calls

Excessive background noise

|

Move to a quieter location.
**** Move closer to the audio output device.
Turn down the volume on your audio output device.

|

Audio out- put device out of range of headphones

|

Volume set too high

Service information

Please contact our customer service team if your device ever stops working in the way you want or expect it to. There are several ways for you to contact us:

In our Service Community, you can meet other users as well as our staff, and you can also share your experiences and pass on your knowledge.
You will find our Service Community at community.medion.com.
Alternatively, use our contact form at www.medion.com/contact.
You can also contact our customer service team via our hotline or by post.

Germany

Opening hours

|

Household & home electronics

Mon–Fri: 07:00–23:00
Sat–Sun: 10:00–18:00

|

+49 (0)201 22099-222

Service address

MEDION AG 45092 Essen Germany

Switzerland

Opening hours

|

Household & home electronics

Mon–Fri: 09:00–19:00

|

+41 (0) 848 – 24 24 26

Service address

MEDION/LENOVO Service Centre Ifangstrasse 6 8952 Schlieren Switzerland

Cleaning

Switch the headphones off and unplug the USB cable if it is plugged in.
Use a dry, soft cloth to clean the headphones.
Avoid the use of chemical solutions and cleaning products because these may damage the device surface and/or markings.

Storing the device when not in use

If you do not intend to use the headphones over a relatively long period of time, store them in a cool, dry place and make sure that they are protected from dust and extreme temperature fluctuations.

Declaration of conformity

MEDION AG hereby declares that this device complies with the fundamental requirements and the other relevant provisions of:

Radio Equipment Directive 2014/53/EU
RoHS Directive 2011/65/EU.

You can download the complete EU Declaration of Conformity at www.medion.com/conformity.
Trademark information

The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. and are used by MEDION under licence.
The USB™ word mark and logos are registered trademarks of the USB Implementers Forum, Inc. and are used by MEDION under licence.
Other trademarks are the property of their respective owners.

Disposal

PACKAGING

Your device has been packaged to protect it from damage in transit. The packaging is made of materials that can be recycled in an environmentally friendly manner.

DEVICE

All old devices marked with the symbol shown must not be disposed of in normal household waste.
In accordance with Directive 2012/19/EU, the device must be properly disposed of at the end of its service life.
This involves separating the materials in the device for the purpose of recycling and minimizing the environmental impact.

Belgium

Opening hours

|

Telephone number

Mon–Fri: 09:00–19:00

|

+32 (0)2 200 61 98

Service address

MEDION B.V.
John F.Kennedylaan 16a 5981 XC Panningen
The Netherlands

Luxembourg

Opening hours

| Telephone number

Mon–Fri: 09:00–19:00

|

+352 (0)34 20 808 664

Service address

MEDION B.V.
John F.Kennedylaan 16a 5981 XC Panningen
The Netherlands

Privacy statement

Dear Customer,
We wish to inform you that we, MEDION AG, Am Zehnthof 77, 45307 Essen, Germany process your personal data as a data controller. For matters regarding data protection, we are supported by our company data protection officer, who can be contacted at MEDION AG, Datenschutz, Am Zehnthof 77, D – 45307
Essen; datenschutz@ medion.com. We process your data for the purpose of warranty processing and associated processes (e.g. repairs) and rely on the sales contract concluded with us when processing your data. Your data will be provided to repair service providers contracted by us for the purpose of warranty processing and associated processes (e.g. repairs).
We generally store your personal data for a period of three years in order to fulfil your legal warranty rights.
You have the right to be informed of the personal data concerned as well as the right to rectification, erasure, restriction of processing, the right to object to processing and the right to data portability. In the case of the right to be informed and the right to erasure, restrictions apply according to paragraphs 34 and 35 of the BDSG (Federal Data Protection Act) (Art. 23 of the GDPR). In addition, there is a right of appeal to a competent data protection supervisory authority (Article 77 of the GDPR in conjunction with paragraph 19 of the BDSG). For MEDION AG, this is the state official for data protection and freedom of information North Rhine-Westphalia, PO box 200444, 40212 Düsseldorf, Germany, www.ldi.nrw.de. The processing of your data is necessary for warranty processing: it is not possible to process the warranty without the provision of the
required data.