Weller WX smart Soldering Instruction Manual

Weller WX smart Soldering

Product Information

The product is a soldering station that comes in four different models: WXMPS MS, WXUPS MS, WXMTS, and WXUTS. The product is manufactured by Weller Tools and can be found on their website: https://www.weller-tools.com/wxsmart.

The product has different tip types series that can be found on the website for more information. The product comes with a user manual that provides detailed instructions on how to use it. The product has different technical specifications that vary depending on the model type and tip type series.

Product Usage Instructions

Before using the product, read the user manual carefully to ensure proper usage and safety. The product is designed for different user groups, including Fachpersonal mit technischer Ausbildung, Elektrofachkraft, Sicherheitsfachkraft, Laien, and Technische Auszubildende unter Anleitung und Aufsicht einer ausgebildeten Fachkraft.
The product requires care and maintenance to ensure proper performance. Refer to the user manual for detailed information on how to care for and maintain the product. The product has different temperature behaviors that vary depending on the model type and tip type series.
The product comes with a warranty that covers defects in materials and workmanship. Refer to the user manual for more information on the warranty coverage.
The product has different symbols that indicate warnings or cautions. Read and understand these symbols before using the product.
Refer to the technical data section of the user manual for detailed information on the different models’ technical specifications, including the tip type series, safety shelf, and power supply.

INFO

https://www.weller-tools.com/wxsmart

Connection

Caution

What in box

For more information about tip type series please visit

WARNING Electrical shock
Protect yourself against electric shocks. The handles on soldering tools with an antistatic design are conductive.

• Avoid touching earthed objects such as pipes, heaters, cookers and refrigerators.
• Do not use the soldering tool in a damp or wet environment.
• Never work on voltage-carrying parts.

WARNING Risk of burns

The soldering tip becomes very hot during soldering work. There is a risk of burns from touching the tips. After the soldering process, the soldering tool and the workpiece holder are still hot.

• Always place the soldering tool in the safety rest while not in use. Make sure the safety holder is stable.
• Do not touch the hot soldering tips and keep them away from inflammable objects..
• Only replace solder tips when cold
• Only replace nozzles when cold

Risk of burning through liquid solder. Protect yourself against solder splashes.

• Wear appropriate protective clothing to protect yourself against burns. Protect your eyes by wearing eye protection.
• When working with adhesives, special attention must be paid to the warning information provided by the adhesive manufacturer.
• Only connect the vacuum and hot air at the designated points.

Store your soldering tool in a safe place. When not in use, units and tools should be stored in a dry, high or locked area out of the reach of children. Make sure that unused soldering tools are free of voltage and de-pressurised.
Do not use the cable for purposes other than those for which it is intended. Never carry the unit by the cable. Do not use the cable to pull the plug out of the socket. Protect the cable against heat, oil and sharp edges.
Be alert. Pay attention to what you are doing. Be smart when using the unit. Do not use the soldering tool if you are having difficulty concentrating.
Avoid abnormal posture. Arrange your work station in an ergonomically correct way. Avoid bad posture when using the unit, as this can lead to postural problems.
The soldering tool must be operated only in perfect technical working order. Safety devices must not be deactivated.
Faults and defects must be repaired immediately. Before using the unit / tool, safety devices must be carefully checked to make sure that they are functioning properly and in the manner intended. Check that moving parts are func-tioning properly and are not sticking, and whether parts are damaged. All parts must be correctly fitted and must satisfy all the requirements necessary to guarantee troublefree operation of the unit.
Use the correct tool. Use only accessories or auxiliary de-vices which are included in the list of accessories or appro-ved for use by the manufacturer. Use WELLER accessories or auxiliary devices on original WELLER equipment only. The use of other tools and other accessories can cause injury.
Secure the tool. Use clamping fixtures to hold the workpiece.
Use a solder fume extraction unit. If appliances for connecting solder fume extraction units are available, ensure that they are connected and used properly.

Specified Conditions Of Use

• Use the soldering iron exclusively for the purpose indicated in the Operating Instructions of soldering and desoldering under the conditions specified here.
• The soldering iron may only used in combination with Weller Supply Units.
• This device may only be used at room temperature and indoors. Protect against moisture and direct sunlight.

User groups

Due to differing degrees of risk and potential hazards, sever-al work steps may only be performed by trained experts.

Operation Filter change

Replacing electrical repla-

cement parts

| Technical trainees under the guidance and supervision of a trained expert

Care and maintenance

WARNING

Before doing any work on the machine, pull the plug out of the socket. Leave the unit to cool down.

Check all connected cables and hoses on a regular basis. If power tools are damaged, they must be immediately removed from use.
Do not use blocked nozzles.

Repairs must always be referred to a Weller-trained specialist.
Use original replacement parts only.

WARNING Risk of burns

• Only replace the soldering tips when they are cold.

The soldering tool must be left switched off in the safety rest for at least 3 minutes until the soldering tip has cooled down. The LED status indicator must be at „OFF“.

Temperature performance

The soldering tool has an internal usage sensor which can be used to set an automatic switch-off function (Stand-by). The settings can be found in the station’s operating instruc-tions.

Warranty

Claims by the buyer for physical defects are time-barred after a period of one year from delivery to the buyer. This does not apply to claims by the buyer for indemnification in accordance with §§ 478, 479 BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a warranty furnished by us if the quality or durability warranty has been furnished by use in writing and using the term „Warranty“.
The warranty shall be void if damage is due to improper use and if the device has been tampered with by unauthorized persons.
For more information please visit www.weller-tools.com.

Symbols

Technical Data

Pico                                                Ultra

Soldering iron| WXMPS MS| WXUPS MS
Temperature range °C

Temperature range °F

| 100 – 450

200 – 850

| 100 – 450

200 – 850

Power consumption| 40 W| 150 W
Mains supply voltage| 12 V / AC| 24 V / AC
Heat-up time

(50°C to 350°C) (120°F to 660°F)

| 3 s| 7 s
Tip type series| RTMS MS / RTPS MS| RTUS MS
Safety rest| WSR 208| WSR 200
Supply unit| WX Smart Station
Micro/Pico Ultra

Desoldering iron| WXMTS| WXUTS
Temperature range °C

Temperature range °F

| 100 – 450

200 – 850

| 100 – 450

200 – 850

Power consumption| 80 W| 150 W
Mains supply voltage| 12 V / AC| 24 V / AC
Heat-up time

(50°C to 350°C) (120°F to 660°F)

| 5 s| 10 s
Tip type series| RTWMS / RTWPS| RTWUS
Safety rest| WSR 210| WSR 210
Supply unit| WX Smart Station

Subject to technical alterations and amendments.

EC declaration of conformity

We hereby declare that the products described herein comply with the following guidelines:

UK declaration of conformity

We hereby declare that the products described herein comply with the following guidelines:

Product Registration

www.weller-tools.com/registration

GERMANY
Weller Tools GmbH
Carl-Benz-Straße 2 74354 Besigheim
Tel: +49 (0)7143 580-0
Fax: +49 (0)7143 580-108
www.weller-tools.com

USA
Apex Tool Group, LLC.
Weller Professional Tools Division 1000 Lufkin Road
Apex, NC 27539
+1 919-362-8381
info@weller-tools.com

CHINA
Apex Tool Group
Room 302A, NO 177 Bibo Road Shanghai, 201202
Tel: +86 (21) 60880288
Fax: +86 (21) 60880289

GREAT BRITAIN
For Weller Tools GmbH
Apex Tool Group UK Ltd Registered in England,
Company Number 14127816 Registered Office:
20 Farringdon Street, 8th Floor London, EC4A 4AB, United Kingdom

© 2023, Apex Tool Group, LLC.
Weller® is a registered Trademark and registered Design of Apex Tool Group, LLC.

References

• tools.com | Buy Power Tools and Automotive Parts online
• Weller Product Registration | Weller Tools
• Home - Weller WXsmart

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>