kanto DML2000 Dual Monitor Arm User Manual
- June 9, 2024
- Kanto
Table of Contents
kanto DML2000 Dual Monitor Arm
Thank you for choosing Kanto
Read these instructions fully before assembly and installation. If you do not
understand these directions, or have any doubts about the safety of the
installation, please consult a qualified installation contractor. Make sure
there are no defective or missing parts.
Do not use defective parts. Kanto cannot be liable for property damage or
injury caused by incorrect mounting, incorrect assembly, lifting or incorrect
use of this product. If there is hardware missing, or if you are uncertain
whether a part is defective, please contact Kanto directly using one of the
methods below.
CAUTION
The maximum loading weight is 22 lb (10 kg). This mount is intended for use
only with the maximum weights indicated.
Use with products heavier than the maximum weights indicated may result in
instability causing possible injury. The desk you plan to affix the Kanto
mount to must be able to support more than 5 times the weight of the monitor
and the mount combined. Do not use this product for any purpose other than to
mount a VESA compliant monitor on a desktop as outlined in this manual.
Improper installation may cause damage to your monitor or serious injury.
Consult a qualified installation contractor if you are unsure about the type
of surface you may have.
Supplied Parts and Hardware
Mount Desk Clamp
Mount Grommet
Included Tools
Required Tools
Project Overview
IMPORTANT!: Please read this entire document before attempting assembly.
-
Mount Monitor Plate
-
Mount Base to Desk
-
Mount Arm
-
Mount Monitor
-
Finalize Adjustments
-
Manage Cables
Limited Warranty to Original Purchaser
Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free from defects in material for the limited warranty period of 5 years.
If equipment fails because of such defects and Kanto is notified within 5 years from the date of shipment with proof of original invoice from an authorized reseller, Kanto will, at its option, provide replacement parts or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Any replacement parts or replacement units are warranted for 90 days from the day of reshipment to the original purchaser.
Customers will be responsible for obtaining a Return Authorization Number and paying shipping costs to return product to a Kanto location or authorized depot. If the equipment is covered under the warranty provisions above, Kanto will replace parts or provide a replacement unit, and be responsible for shipping costs to the customer. Please keep the original packaging to prevent damage to the product during shipping. Insuring your shipment is also recommended.
The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the equipment, even if advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty, including any warranty of merchantability and fitness for any particular purpose, all of which are expressly disclaimed.
Customer Service
1-888-848-2643
[email protected]
kantomounts.com/resources/dmI2000
Find product and installation resources online