ASROCK IMB-1006 Intel Processor N97 Mini-ITX Motherboard User Guide

IMB-1006 Intel Processor N97 Mini-ITX Motherboard
User Guide

IMB-1006 Intel Processor N97 Mini-ITX Motherboard

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United  States and other countries.

Revision History

1. 4-pin DC-in PWR Connector (Input +12V ~+28V) & UPS Module Power Output Connector
   Pin1 and Pin4: GND
   Pin2 and Pin3: DC Input

2. 2-pin UPS Module Power Input Connector
   Pin1: GND
   Pin2: DC Input

3. M.2 Key-E Socket (M2_E1)
   Pin| Signal Name| Signal Name| Pin
   ---|---|---|---
   1| GND| +3.3V| 2
   3| USB_D+| +3.3V| 4
   5| USB_D-| NA| 6
   7| GND| NA| 8
   9| NA| NA| 10
   11| NA| NA| 12
   13| NA| NA| 14
   15| NA| NA| 16
   17| NA| GND| 18
   19| NA| NA| 20
   21| NA| NA| 22
   23| NA| |
   | | |
   33| GND| NA| 32
   35| PETp| NA| 34
   37| PETn| NA| 36
   39| GND| NA| 38
   41| PERp| NA| 40
   43| PERn| NA| 42
   45| GND| NA| 44
   47| PEFCLKp| NA| 46
   49| PEFCLKn| NA| 48
   51| GND| NA|
   53| CLKREQ#| PERSTO#| 52
   55| WAKE#| NA| 54
   57| GND| NA| 56
   59| NA| SMB_DATA| 58
   61| NA| SMB_CLK| 60
   63| GND| NA| 62
   65| NA| NA| 64
   67| NA| NA| 66
   69| GND| NA| 68
   71| NA| NA| 70
   73| NA| +3.3V| 72
   75| GND| +3.3V| 74

4. PWR_ADAPTER1

Pin| Signal
Name| Pin| Signal
Name| Pin| Signal
Name| Pin| Signal
Name
---|---|---|---|---|---|---|---
4| GND| 3| 5VA| 2| 5VA_
CONTROL| 1| GND
5. SPI_TPM Header (SPI_TPM1)

6. MIPI1

7. CPU FAN Connector (+12V)

8. SATA3 Connector (SATA3_1)

9. SATA Power Output Connector
   

10. USB3.2 Gen1 Connector (USB3H_2)

11. ESPI Header

12. CON_LBKLT_CTL Voltage Level (BLT_PWM2)
    1-2: +3V
    2-3: +5V

13. Brightness Control Mode (BLT_PWM1)
    1-2: From eDP PWM to CONLBKLT CTL
    2-3: From LVDS PWM to CON_LBKLT_CTL

14. LVDS Panel Connector

• eDP pin definition (switch by BIOS): 15. Backlight Power Connector (BLT_PWR1)
  Pin| Signal
  Name| Pin| Signal
  Name| .
  Pin| Signal
  Name| .
  Pin| Signal
  Name| .
  Pin| Signal
  Name| .
  Pin| Signal
  Name
  ---|---|---|---|---|---|---|---|---|---|---|---
  6| LCD BLT— VCC| 5| LCD BLT— VCC| 4| VCC
  CON LBKL
  EN —| 3| CON
  LBKLI| 2| CTL
  GND
  1| | GND
  16. Backlight Volume Control (BLT_VOL1)
  Pin| Signal
  Name| Pin| Signal
  Name| Pin| Signal Name| Pin| Signal Name| Pin| Signal
  Name| D.
  1 Pin| Signal
  Name| Pin| Signal
  Name
  ---|---|---|---|---|---|---|---|---|---|---|---|---|---
  7| GND| 6| GND| 5| BRIGHTNESS—
  DW| 4| BRIGHTNESS—
  UP| 3| PWRDN| 2| GPIO
  VOL DW| | 1 1
  GPIO
  VOL UP
  17. 17 : eDP and LVDS Panel Power Select
  (LCD_VCC) (PNL_PWR1)
  1-2: LCD_VCC: +3V
  2-3: LCD_VCC: +5V
  4-5: LCD_VCC: +12V

  18. System Panel Header (PANEL1)
      

  19. Clear CMOS Header (CLRMOS1)
      1-2 : Normal
      2-3 : Clear CMOS

  20. eDP and LVDS Backlight Power Select
      (LCD_BLT_VCC) (BKT_PWR1)
      1-2: LCD_BLT_VCC: +5V
      2-3: LCD_BLT_VCC: +12V
      4-5: LCD_BLT_VCC: DC Input

  21. 4-Pin Chassis FAN Connector (+12V)

  22. USB3.2 Gen1 Connector (USB3H_3_4)

Installation of ROM Socket

• Do not apply force to the actuator cover after ic inserted.

• Do not apply force to actuator cover when it is opening over 120 degree, Otherwise, the actuator cover may be broken.

• The yellow dot (Pin1) on the ROM must be installed at pin1 position of the socket.

• Make sure the white dot on the ROM is installed outwards of the socket.

• For further details of how to install ROM, please refer to ASRI website.
  Warning: If the installation does not follow as the picture, then it may cause severe damage to chipset & MB.

• Auto clear CMOS when system boot improperly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>