MOES CCP-TY-EU-LN Tuya Wifi Smart Touch Screen Center Control Panel with Voice Control User Manual
- June 9, 2024
- MOES
Table of Contents
- CCP-TY-EU-LN Tuya Wifi Smart Touch Screen Center Control Panel with
- Product Specifications
- Packing list
- Installation preparation
- Safety instructions
- Installation instructions
- Download the MOES APP
- Add Device
- SERVICE
- WARRANTY CARD
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Center Control Panel with Voice Control
User Manual
CCP-TY-EU-LN Tuya Wifi Smart Touch Screen
CCP-TY-EU-LN Tuya Wifi Smart Touch Screen Center Control Panel with
Voice Control
|
---|---
https://drive.google.com/drive/folders/1eH3ALJJ03iAbkt0zhTmSinipxxVzVqm1usp=sharelink|
https://pan.baidu.com/s/1RD4Qa6toFWeyEH08VtTqwg?pwd=tfge
Product Specifications
Product name | Smart Control Panel |
---|---|
Product model | CCP-TY-EU-LN |
Input | 100-240 VAC , 50/60Hz |
Rated current | 74mA |
Wireless protocol | Wi-Fi , Zigbee |
Working temperature | 0°C-40°C |
Working humidity | 5%-90%RH non-condensing |
Product size | 86.0×86.0x10.5rnm (without base) |
86.0×86.0x36.2mm (including base)
Wireless Type| Frequency| Max.EIRP Power
---|---|---
Wi-Fi| 2412-2472MHz| 20 dBm
Bluetooth| 2402-2480MHz| 10 dBm
ZigBee| 2405-2480MHz| 10 dBm
Packing list
- Smart Control Panel x1
- Instruction Manual x1
- Screw x2
Installation preparation
Safety instructions
To ensure the correct usage of this product, this product must be installed or
disassembled by a professional electrician.
The main power switch must be cut off before installing or disassembly-bling
this product t o prevent electric shock. This product needs t o be kept away
from fire and water sources during installation and use.
This product cannot be used in humid environments (such as bathrooms).
Currently, the device does not support PoE power supply, thus pleased not plug
the PoE network cable into the network port t o avoid burnout of the device.
Installation instructions
- Turn off the circuit breaker and use the electrical tester to test the power.
- Ensure the circuit breaker Is off before wiring.
Attention
Please disconnect the power supply before installing or removing the device
for avoiding irreversible damage unpredictable problems.
Remove the panel (as shown below):
Wiring instructions
-
Check the wiring to make sure that the copper wire is in good contact with the terminal and there is no exposed wire.
-
Use the correct type of screws, countersunk screws for
Asia-Pacific region, panhead screws for Europe region, to fix the base to the cassette, and then buckle back the panel. -
Please note that the screws should not be tightened too tightly during the Installation process to avold deformation or damage to the screen or hardware.
-
If you encounter any problem with the Installation, do not press too hard to force the installation. You should level the wall first and check the bracket.
Download the MOES APP
Download MOES App on App store or scan the QR code
MOES App Is upgraded as much more compatibility than Tuya Smart/Smart Life
App, functionals w e l l for scene controlled b y Skirl, widget and scene
recommendations as the fully new customized service.
(Note: Tuya Smart/Smart Life App still works, but MOES App I s highly
recommended)
Registration or Log in.
- Download “MOES” Application.
- Enter the Register/Login interface; tap “Register” t o create an account by entering your phone number to get verification code and “Set password”. Choose “Log in” if you already have a MOES account.
Add Device
- Turn on the power, and wait for the device to initiate. Connect to the network according to the instructions on the screen.
- Open the MOES App, then scan the QR code on the device to configure the network (as shown in the figure below), and perform related operations according to the instructions on the device interface after the commission is successfully finished.
*The QR code is based on the display of actual device
- Device/scene overview: enter the corresponding entry in the smart control panel page of the MOES App, tick the devices or scenes that need to be displayed on the screen.
- Voice control: enter the corresponding entrance in the smart control panel page of the MOES App to configure the vocal scene.
- Gateway function: enter the corresponding entrance in the smart control panel page of the MOES App, then add ZigBee devices.
- Setting: slide down at the top of the Smart Control Panel screen to call out the setting page.
Classily equipment. Equipment in which protection against electric shock
does not rely on basic insulation only, but in which a supplementary safeguard
is provided, there being no provision for protective earthing or reliance
upon installation conditions. ~ ac. Nature of the supply voltage.
Declaration of Conformity European notice Hereby, Wenzhou Morning
Electronics Co., Ltd. declares that this product is in compliance with
essential requirements and other relevant provisions of Directive
2014/53/EU,201 1/65/EU. Hangzhou Tuya Information Technology Co., Ltd. A copy
of the Declaration of conformity can be found at
https://moessmart.com.
**** This product must not be disposed of as normal household waste, in
accordance with EU directive for waste electrical and electronic equipment
(WEEE-2012/19/EU). Instead ,it should be disposed of by returning it to the
point of sale, or to a municipal recycling collection point.
The device could be used with a separation distance of 20cm to the human body.
SERVICE
Thank you for your trust and support to our products, we will provide you with
a two-year worry-free after-sales service (freight is not included), please do
not alter this warranty service card, to safeguard your legitimate rights and
interests. If you need service or have any questions, please consult the
distributor or contact us.
Product quality problems occur within 24 months from the date of receipt,
please prepare the product and the packaging, applying for after-sales
maintenance in the site or store where you purchase; If the product is
damaged due to personal reasons, a certain amount of maintenance fee shall be
charged for repair.
We have the right to refuse to provide warranty service if:
- Products with damaged appearance, missing LOGO or beyond the service term
- Products that are disassembled, injured, privately repaired, modified or have missing parts
- The circuit is burned or the data cable or power interface is damaged
- Products damaged by foreign matter intrusion (including but not limited to various forms of fluid, sand, dust, soot, etc.)
WARRANTY CARD
Product Information
Product Name……………………………………………..
Product Type………………………………………………..
Purchase Date……………………………………………….
Warranty Period……………………………………………..
Dealer Information…………………………………………
Customer’s Name…………………………………………….
Customer Phone……………………………………………….
Customer Address……………………………………………..
Maintenance Records
Failure date | Cause Of Issue | Fault Content | Principal |
---|---|---|---|
Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.
If you have any other need, please do not hesitate to contact us first, we will try to meet your demand.
@moessmart
@moes_smart
@moes_smart
MOES.Official
@moes_smart
www.moes.net
** EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road
Business Centre, Taffs Well, Cardiff, Wales,
CF15 7QR
Tel: +44-292-1680945
Email: contact@evatmaster.com
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
Manufacturer:
WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology
Innovation Center, NO.238, Wei 11 Road,
Yueqing Economic Development Zone,
Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service:** service@moeshouse.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>