anslut 019944 Dimmable Downlights LED Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 019944 Dimmable Downlights LED
Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.
INSTALLATION
SAFETY INSTRUCTIONS
- Only intended for indoor use.
- Downlights must not be covered with anything that obstructs ventilation, e.g. insulation, foil, paper, plastic, or the equivalent.
- The electrical installation must comply with local regulations. Consult an authorized electrician if in doubt.
- Always follow the electrical specifications on the product labeling.
- Always switch off the power supply before installation, connection, and service.
- Never modify the light, this could result in serious material damage/personal injury and will invalidate the warranty.
- The light must be connected to an earthed power supply on installation.
- If the cable to this light is damaged it must only the replaced by the manufacturer or service technician, or other qualified people, to eliminate any risks.
- Do not use a light source of more than 50 W.
- This product contains a light source of energy efficiency class
. - Replaceable (LED-only) light source by an end-user.
ELECTRICAL SAFETY
New installations and extensions to existing systems should always be carried
out by an authorized electrician. If you have the necessary experience and
knowledge
(otherwise contact an electrician), you can replace power switches and wall
sockets, fit plugs, extension cords and light sockets. Incorrect installation
can result in fatal injury and the risk of fire.
TECHNICAL DATA
- Rated voltage 220-240V ~ 50 Hz
- Output 4.7 W
- Luminous flux 345 lm
- Colour temperature 2700 K
- Life span 15000 h
- Off/On 50000 times
- Energy class F
- Dimmable Yes
- Protection rating IP20
- Luminous flux retention factor 0.7
- Inset size Ø 65 mm
- Overall size Ø 85 mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>