TELTONIKA FMM003 Advanced OBDII Tracker User Manual

: June 9, 2024
: teltonika

Table of Contents

FMM003 Advanced OBDII Tracker
Product Information: Advanced OBDII Tracker – FMM003
Know Your Device
Set Up Your Device
PC Connection (Windows)
Configuration
Various Status Window Tabs

FMM003 Advanced OBDII Tracker

Product Information: Advanced OBDII Tracker – FMM003

The Advanced OBDII Tracker – FMM003 is a device used for
tracking and monitoring vehicles. It comes with a Quick Manual v2.0
that provides detailed information on how to set up and use the
device. The device has an OBDII connector, a micro-USB port, a
micro-SIM slot, and a battery socket. It also has status LED lights
that indicate the device’s connectivity and power status.

Know Your Device

The device has a top view that shows the OBDII connector,
navigate LED, and status LED. Without the cover, it has a battery
socket, micro-USB port, and micro-SIM slot. The device’s pinout
shows the details of each pin number and its corresponding
description.

Set Up Your Device

To set up the device, follow these steps:

Gently remove FMM003 cover using plastic pry tool from both
sides.
Insert Micro-SIM card with PIN request disabled or read the
Wiki on how to enter it later in Teltonika Configurator. Make sure
that MicroSIM card cut-off corner is pointing forward to slot.
Connect the battery to the device. Position the battery in
place where it does not obstruct other components.
Attach device cover back.

The device is now ready to be connected.

PC Connection (Windows)

To use the device on your computer, install the COM port drivers
by downloading them from the provided link. Extract and run
TeltonikaCOMDriver.exe, click Next in driver installation window,
then click Install in the following window. The setup will continue
installing the driver, and eventually, a confirmation window will
appear. Click Finish to complete the setup.

Configuration

The FMM003 device comes with default factory settings that
should be changed according to the user’s needs. Configuration can
be performed via Teltonika Configurator software, which can be
downloaded from the provided link. Make sure you have the correct
version of MS .NET Framework installed on your computer before
using the Configurator software. The device has one user-editable
profile, which can be loaded and saved to the device. After any
modification of configuration, the changes need to be saved to the
device using the Save to device button.

Various Status Window Tabs

The device has various status window tabs that display
information about GNSS, GSM, I/O, Maintenance, and more. The main
buttons offer functionality such as downloading the configurator,
changing the language of the software, and more.

FMM003
Advanced OBDII tracker
Quick Manual v2.0

CONTENT
Know your device…………………………………………………………………………………………………………………………………………………………………………3 Pinout ………………………………………………………………………………………………………………………………………………………………………………………….4 Set up your device ……………………………………………………………………………………………………………………………………………………………………….5 PC Connection (Windows)…………………………………………………………………………………………………………………………………………………………….6 How to install USB drivers (Windows) …………………………………………………………………………………………………………………………………………..6 Configuration……………………………………………………………………………………………………………………………………………………………………………….7 Quick SMS configuration………………………………………………………………………………………………………………………………………………………………9 Mounting recommendations…………………………………………………………………………………………………………………………………………………….. 11 Basic characteristics …………………………………………………………………………………………………………………………………………………………………. 12 LED indications…………………………………………………………………………………………………………………………………………………………………………. 12 Safety information …………………………………………………………………………………………………………………………………………………………………… 16 Certification and Approvals ………………………………………………………………………………………………………………………………………………………. 17 Warranty ………………………………………………………………………………………………………………………………………………………………………………….. 18 Warranty disclaimer ………………………………………………………………………………………………………………………………………………………………… 18
Quick Manual v2.0 // FMM003 2

KNOW YOUR DEVICE

TOP VIEW
OBDII CONNECTOR

NAVIGATE LED
STATUS LED

TOP VIEW (WITHOUT COVER)

BATTERY SOCKET

MICRO-USB

MICRO-SIM SLOT

Quick Manual v2.0 // FMM003 3

PINOUT

PIN NUMBER PIN NAME

DESCRIPTION

1

LS_CAN_H

Low Speed CAN High/ PSA CAN High

3

MS_CAN_H

Medium Speed CAN High

PIN9

PIN16

4

GND (-)

Ground

5

GND (-)

Ground

6

CAN_H

High Speed CAN

7

K-Line

8

CAN_L

PSA CAN Low

9

LS_CAN_L

Low Speed CAN Low

PIN1

PIN8

11

MS_CAN_L

Medium Speed CAN Low

FMM003 OBDII socket pinout

14

HS_CAN_L

High Speed CAN Low

15

L-Line

16

VCC (10 – 30)V DC(+)

POWER SUPPLY (+1030 V DC)

Quick Manual v2.0 // FMM003 4

SET UP YOUR DEVICE
HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY

1 COVER REMOVAL

2 MICRO-SIM CARD INSERT

3 BATTERY CONNECTION

4 ATTACHING COVER BACK

Gently remove FMM003 cover using plastic pry tool from both sides.

Insert Micro-SIM card as shown with PIN request disabled or read our Wiki1 how to enter it later in Teltonika Configurator2. Make sure that MicroSIM card cut-off corner is pointing forward to slot.

Connect battery as shown to device. Position the battery in place where it does not obstruct other components.

Attach device cover back.
Device is ready to be connected.

1wiki.teltonika-gps.com/view/ FMM003_Securityinfo
2wiki.teltonika.lt/view/Teltonika Configurator

Quick Manual v2.0 // FMM003 5

PC CONNECTION (WINDOWS)
1. Power-up FMM003 with DC voltage (10 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED indications1”.
2. Connect device to computer using Micro-USB cable or Bluetooth connection: · Using Micro-USB cable · You will need to install USB drivers, see “How to install USB drivers (Windows)2” · Using Bluetooth · FMM003 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device > Bluetooth. Choose your device named “FMM003_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
3. You are now ready to use the device on your computer.
1wiki.teltonika-gps.com/view/FMM003_LED_status 2Page 6, “How to install USB drivers”
HOW TO INSTALL USB DRIVERS (WINDOWS)
1. Please download COM port drivers from here1. 2. Extract and run TeltonikaCOMDriver.exe. 3. Click Next in driver installation window. 4. In the following window click Install button. 5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
setup.
1teltonika-gps.com/downloads/en/fmb120/TeltonikaCOMDriver.zip
Quick Manual v2.0 // FMM003 6

CONFIGURATION
At first FMM003 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator1 software. Get the latest Configurator version from here2. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
1wiki.teltonika-gps.com/view/Teltonika_Configurator 2wiki.teltonika- gps.com/view/Teltonika_Configurator_versions

MS .NET REQUIREMENTS
Operating system
Windows Vista Windows 7 Windows 8.1 Windows 10

MS .NET Framework version Version

MS .NET Framework 4.6.2

32 and 64 bit

1dotnet.microsoft.com/en-us/download/dotnet-framework/net462

Links www.microsoft.com1

Quick Manual v2.0 // FMM003 7

Various Status window1 tabs display information about GNSS2, GSM3, I/O4, Maintenance5 and etc. FMM003 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:

Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking in the right bottom corner.
FMM003
Configuration process begins by pressing on connected device.

Load from device loads configuration from device. Save to device saves configuration to device. Load from file loads configuration from file. Save to file saves configuration to file. Update firmware updates firmware on device. Read records reads records from the device.

FMM003
After connection to Configurator Status window will be displayed.

Reboot device restarts device.
Reset configuration sets device configuration to default.
Most important configurator section is GPRS where all your server and GPRS settings6 can be configured and Data Acquisition7 where data acquiring parameters can be configured. More details about FMM003 configuration using Configurator can be found in our Wiki8. 1wiki.teltonika- gps.com/view/FMM003_Status_info 2wiki.teltonika- gps.com/view/FMM003_Status_info#GNSS_Info 3wiki.teltonika- gps.com/view/FMM003_Status_info#GSM_Info 4wiki.teltonika- gps.com/view/FMM003_Status_info#I.2FO_Info 5wiki.teltonika- gps.com/view/FMM003_Status_info#Maintenance 6wiki.teltonika- gps.com/index.php?title=FMM003_GPRS_settings 7wiki.teltonika- gps.com/index.php?title=FMM003_Dataacquisition settings 8wiki.teltonika- gps.com/index.php?title=FMM003_Configuration
Quick Manual v2.0 // FMM003 8

QUICK SMS CONFIGURATION

Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it:

« setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0»

1

2

3

4

5

6

Note: Before SMS text, two space symbols should be inserted.

GPRS SETTINGS: 1 2001 APN

2 2002 APN username (if there are no APN username, empty field should be left)

3

2003 APN password (if there are no APN password, empty field should be left)

SERVER SETTINGS: 4 2004 Domain 5 2005 Port 6 2006 Data sending protocol (0 TCP, 1 UDP)

Quick Manual v2.0 // FMM003 9

DEFAULT CONFIGURATION SETTINGS
MOVEMENT AND IGNITION DETECTION:

DEVICE MAKES A RECORD ON MOVING IF ONE OF THESE EVENTS HAPPEN:

VEHICLE MOVEMENT will be detected by accelerometer

IGNITION will be detected by vehicle power voltage between 13,2 30 V

DEVICE MAKES A RECORD ON STOP IF:

RECORDS SENDING TO SERVER:

PASSES 300 seconds

VEHICLE DRIVES 100 meters

VEHICLE TURNS 10 degrees

SPEED DIFFERENCE between last coordinate and current position is greater than 10 km/h

1 HOUR PASSES while vehicle is stationary and ignition is off

EVERY 120 SECOND it is sent to the server If device has made a record

After successful SMS configuration, FMM003 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator1 or SMS parameters2. 1wiki .teltonika-gps.com/view/Teltonika_Configurator 2wiki.teltonika- gps.com/view/Template:FMB_Device_Family_Parameter_list
Quick Manual v2.0 // FMM003 10

MOUNTING RECOMMENDATIONS
CONNECTING THE DEVICE TO THE VEHICLE: Find OBDII connector in your vehicle.
Most common OBDII connector locations. Quick Manual v2.0 // FMM003 11

LED INDICATIONS

BASIC CHARACTERISTICS

NAVIGATION LED INDICATIONS

BEHAVIOUR
Permanently switched on
Blinking every second

MEANING GNSS signal is not received Normal mode, GNSS is working

GNSS is turned off because:

Off

Device is not working or Device is in

sleep mode

Blinking fast constantly

Device firmware is being flashed

STATUS LED INDICATIONS

BEHAVIOUR
Blinking every second
Blinking every two seconds
Blinking fast for a short time
Off

MEANING Normal mode
Sleep mode
Modem activity Device is not working or Device is in boot mode

MODULE Name Technology

Quectel BG95-M3, Teltonika TM2500 Quectel BG95-M6 (only Japan and North Korea) FMM003-Q5IB0 (BG95-M6)
LTE CAT M1/CAT NB2/EGPRS/GNSS/ BLUETOOTH

GNSS
GNSS
Receiver Tracking sensitivity Accuracy Hot start Warm start Cold start

GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS 33 channel -165 dBM < 3 m < 1 s < 25 s < 35 s

CELLUAR Technology 2G bands

LTE CAT M1, CAT NB2
BG95-M3: EGPRS: B2/B3/B5/B8

Quick Manual v2.0 // FMM003 12

4G bands
Data transfer
Maximum output power Data support

BG95-M3 and BG95-M6: CAT M1: LTE-FDD: B1/B2/B3/B4/B5/ B8/B12/B13/B18/B19/B20/B25/B26/ B27/B28/B66/B85 CAT NB2: LTE- FDD:B1/B2/B3/B4/B5/ B8/B12/B13/B18/B19/B20/B2/B28/ B66/B71/B85
BG95: LTE: Max. 588Kbps (DL)/ Max.1119Kbps (UL) GPRS: Max. 107Kbps (DL)/Max. 85.6Kbps (UL)
Class 4 for GSM850/900: 33±2dBm Class 1 for GSM1800/1900: 30±2dBm Class 3 for LTE-TDD: 20±2dBm Class 3 for LTE-FDD: 20±2dBm Bluetooth: 4.30dBm (Maximum out EIRP) Bluetooth LE: -5.17dBm (Maximum out EIRP)
SMS (text/data)

Power Consumption

At 12V < 6.5 mA (Ultra Deep Sleep) At 12V < 8 mA (Deep Sleep) At 12V < 13 mA (Online Deep Sleep) At 12V < 16.3 mA (GPS Sleep) At 12V < 31 mA (nominal with no load)
At 12V < 0.25A Max. (with full Load / Peak

BLUETOOTH Specification
Supported peripherals

4.0 + LE
Temperature and Humidity sensor1, Inateck Barcode Scanner, Universal BLE sensors support

OBD INTERFACE Data

HS CAN, MS CAN, SW CAN, K-line

POWER Input voltage range Back-up battery Internal fuse

10 – 30 V DC with overvoltage protection
170 mAh Li-Po battery 3.7 V (0.63 Wh)
3A, 125V

1https://teltonika.lt/product/bluetooth-sensor/

Quick Manual v2.0 // FMM003 13

Data reading
INTERFACE Connection GNSS antenna GSM antenna USB LED indication SIM Memory

OEM Fuel level, odometer and up to 32 vehicle onboard parameters, supported OBD protocols: ISO 9141-2 (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (fast init, 10.4 kbaud) ISO 15765-4 CAN (11 bit ID, 250 kbaud) ISO 15765-4 CAN (11 bit ID, 500 kbaud) ISO 15765-4 CAN (29 bit ID, 250 kbaud) ISO 15765-4 CAN (29 bit ID, 500 kbaud) ISO 14229 (UDS) J2819 (VW TP2.0
OBDII socket
Internal High Gain
Internal High Gain
2.0 Micro-USB
2 status LED lights
Micro-SIM
128MB internal flash memory

PHYSICAL SPECIFICATION

Dimensions

67,2 x 49,6 x 25 mm (L x W x H)

Weight

63 g

OPERATING ENVIRONMENT

Operating temperature (without battery)

-40 °C to +85 °C

Storage temperature (without battery)

-40 °C to +85 °C

Operating humidity 5% to 95% non-condensing

Operating temperature (with battery):

-20 °C to +40 °C

Ingress Protection Rating

IP41

Battery charge temperature

0 °C to +45 °C

Battery discharge temperature

-20 °C to +60 °C

Battery storage temperature

-20 °C to +45 °C for 1 month -20 °C to +35 °C for 6 months

FEATURES Sensors

Accelerometer

Quick Manual v2.0 // FMM003 14

Scenarios
Sleep modes
Configuration and firmware update
SMS GPRS commands Time Synchronization Fuel monitoring Ignition detection

Green Driving, Over Speeding detection, Jamming detection, GNSS Fuel Counter, Excessive Idling detection, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip2
GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep3
FOTA Web4, FOTA5, Teltonika Configurator6 (USB, Bluetooth), FMBT mobile application7 (Configuration)
Configuration, Events, Debug
Configuration, Debug
GPS, NITZ, NTP
OBDII
Accelerometer, External Power Voltage, Engine RPM

2wiki.teltonika-gps.com/view/FMM003_Features_settings 3wiki.teltonika- gps.com/view/FMM003_Sleep_modes#Deep_Sleep_mode 4wiki.teltonika- gps.com/view/FOTA_WEB 5wiki.teltonika-gps.com/view/FOTA 6wiki.teltonika- gps.com/view/Teltonika_Configurator 7wiki.teltonika- gps.com/view/FMBT_Mobile_application

Quick Manual v2.0 // FMM003 15

SAFETY INFORMATION
This message contains information on how to operate FMM003 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
· The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10…+30 V DC.
· To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.
· Before unmounting the device from vehicle, ignition MUST be OFF.

Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.
All wireless data transferring devices produce interference that may affect other devices which are placed nearby.
Please consult representatives of your vehicle model regarding OBDII location on your vehicle. In case you are not sure about proper connection, please consult qualified personnel.
The programming must be performed using a PC with autonomic power supply.
Installation and/or handling during a lightning storm is prohibited.
The device is susceptible to water and humidity.
Teltonika is not responsible for any harm caused by wrong cables used for connection between PC and FMM003
WARNING! Do not use FMM003 device if it distracts driver or causes inconvenience due to OBDII placement. Device must not interfere with driver.
Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them to battery recycle bin found in stores.
Quick Manual v2.0 // FMM003 16

CERTIFICATION AND APPROVALS

This sign on the package means that it is necessary to read the Users Manual before your start using the device. Full Users Manual version can be found in our Wiki1.
1wiki.teltonika-gps.com/index.php?title=FMM003
The RoHS1 is a directive regulating the manufacture, import and distribution of Electronics and Electrical Equipment (EEE) within the EU, which bans from use 10 different hazardous materials (to date).
1wiki.teltonika-gps.com/view/FMM003_RoHS

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.
CHECK ALL CERTIFICATES
All newest certificates may be found in our Wiki2. 2 wiki.teltonika- gps.com/view/FMM003Certification%26_Approvals

Quick Manual v2.0 // FMM003 17

WARRANTY
We guarantee our products 24-month warranty1 period. All batteries carry a 6-month warranty period. Post-warranty repair service for products is not provided. If a product stops operating within this specific warranty time, the product can be: · Repaired · Replaced with a new product · Replaced with an equivalent repaired product fulfilling the same functionality · Replaced with a different product fulfilling the same functionality in case of EOL for the original product
1Additional agreement for an extended warranty period can be agreed upon separately.
WARRANTY DISCLAIMER
· Customers are only allowed to return products as a result of the product being defective, due to order assembly or manufacturing fault.
· Products are intended to be used by personnel with training and experience. · Warranty does not cover defects or malfunctions caused by accidents, misuse, abuse, catastrophes, improper maintenance
or inadequate installation not following operating instructions (including failure to heed warnings) or use with equipment with which it is not intended to be used. · Warranty does not apply to any consequential damages. · Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. · More information on what is RMA1
1wiki.teltonika-gps.com/view/RMA_guidelines
Quick Manual v2.0 // FMM003 18