ESORUN Farer 01 3 In 1 Wireless Power Bank User Manual
- June 9, 2024
- ESORUN
Table of Contents
ESORUN Farer 01 3 In 1 Wireless Power Bank User Manual
Note: Thank you for your purchase, the wireless charger is widely compatible with all Qi devices, like [Apple]iWatch se/6/5/4/3/2/1; Aripods Pro/2, and others TWS; iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone SE 2020, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone XS, iPhone XS MAX, iPhone X, iPhone XR, iPhone 8, iPhone 8 Plus; [SAMSUNG] Galaxy S 21/S20/S10/S10 Plus/S1 0E/S9/S9 Plus/S8 /S8 Plus/Samsung Galaxy NotelO/Note9/Note8/Galaxy S7 Edge/Galaxy S7/Galaxy S6 Edge plus, [LG] G7 V30 V35 V40; G2, G3, G6, Lucid2(VS870), Optimus F5(AS870), Vu 3, Spectrum 2, Optimus G Pro, Optimus Vu II, Optimus LTE 2 [GOOGLE] Pixel 3, Pixel 3XL, NEXUS 4, NEXUS 5, NEXUS 6 [Xiaomi] Fast Charge: MIX 2S, MIX 3 [SONY] Fast Charge: Xperia Z3v(D6708); XZ2, XZ2 Premium, XZ3.
Specifications
Phone Output | 15W(Max) / 10W / 7.5W / 5W |
---|---|
Watch Output | 3W(Max)(Apple Watch ) |
Airpods Output | 5W(Max) (Apple Airpod ) |
Power | 15W / lOW / 7.5W / 5W |
Input | 5V/3A, 9V/2A, 12V/2A |
Adapter Requirements | QC2.0/3.0/PD Fast Adapter |
Charging Efficiency | > 75% |
Charging Distance | •6 mm |
Dimension | 7.22.70.62 inch |
Weight | 5.14oz (146g) |
Product Structure
How to use
Connect the charging cradle to the wall adapter.
Charging the device
- Place your phone, Apple Watch and AirPods on the center of the stand to ensure stable charging
Apple Watch
AirPods
Notice:
- In order to suit models in different sizes, you need to adjust thebutton up or down on the right side to charge your device or get better performance.
- For vERTICAL LY charging, the height of the device (including the 148m m (5.82”) ( like iPhone i2 mini & iPhone 8), switch dor n to the LOW gear; l48mm (5.82″), switch up to the UPPER gear (Default mode);
- For HORIZONTALLY charging, switch down to the LOW gear and open the horizontal bracket and put the cell phone on it;
- The wireless charger can charge cell phones, AirPods and Apple Watch at the same time, then the maximum output power isIAW.
The factory switch isin an up-regulated state
The Dimensions Between The Coil and the Brachet are As Follows
Correct Position Reference
HO WIRELESS CHARGING
LED Usage
Remarks
- Q nick c ha rge QC2.0J QC3.0/QC4. OJ P D Fast Ch a rge r ma11 adapter required to accessfast wireless charging .
- To ensure proper use, please use our USB-Type C cable (included ).
- It is normal for the wireless charger and your smartphone to get hot under working conditions, especially when the phone is being charged and used at the same time (such as playing
- Not works with SV/1A or lower input. (such as PC powered or USB partfrom socket).
- Attention: Not for SAMSUNG Watch and Only supports AirPods with wireless charging cases.
When your wireless charging is not working propert
- Clean the clutter on the wireless charge.
- Please make sure the wireless charging coil is correctly positioned with the phone coil.
- When the wireless charger is overheating, keep your mobile device away from the wireless transmitter. Please wait for the wireless transmitter to cool down before trying to charge it.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The distance between user and products should be no less than 20cm.