peak design M-CM-AD-BK-WEB-1 Wireless Charging Vent Mount Instructions

June 10, 2024
peak design

peak design M-CM-AD-BK-WEB-1 Wireless Charging Vent Mount Instructions
peak design M-CM-AD-BK-WEB-1 Wireless Charging Vent
Mount

WHAT’S IN THE BOX

requires Peak Design Case
not included
WHAT’S IN THE BOX

ARE MY VENTS SUITABLE

For the Vent Mount to perform optimally, your vehicle must be equipped with the correct style of vents:

  • Straight blades that are 7-23mm (1/4-7/8”) deep. Secure, not easily-removable blades.
  • Minimum 8mm (5/16”) gap between blades.
  • Minimum 63mm (2 1/2″) vent body width for vents with vertical blades.
  • Minimum 63mm (2 1/2”) vent body height for vents with horizontal blades.
    ARE MY VENTS SUITABLE

INSTALLATION

NOTE: In general, HVAC vents are not designed with accessory mounting in mind. As such, exercise caution during installation.

  1. Loosen Swivel Knob ½ turn and rotate Swivel Arm so it is aligned with the Mount Body. Note that this may require some force to initially move Swivel Arm

  2. Fully Extend the Blade Hook by turning the Hook Knob
    Do not over-extend the Blade Hook, this can damage the mount! Stop at the warning!

  3. Adjust your car’s vent to a fully open position.

  4. Align the Blade Hook just above the blade on which you plan to attach. Align the Blade Clip 1-2 blades down from the Hook. Ideal position is car/vent dependent.

  5. Insert both Blade Hook and Blade Clip fully into the vent.

  6. Drop the Hook over the vent blade and secure it by rotating the Hook Knob.
    Do not overtighten the Hook Knob, ! this can damage the vent!
    INSTALLATION

  7. Loosen Swivel Knob, adjust the Swivel Arm to desired position then secure it by retightening the Swivel Knob.
    INSTALLATION

  8. Clean surfaces with provided wipe for routing the Cable to the Charging Port. Remove adhesive backing from Cable Clips and press down firmly to attach.
    INSTALLATION

USE

Wireless Charging Car Vent Mount magnetically connects to the back of your phone. Requires Peak Design Everyday Case or MagSafe Phone/Case. Once connected, confirm phone is charging via phone screen.
USE

WARNINGS

WARNING: A phone mounted on vent ! may overheat when heat is on.

**** Vent Mount may prevent vent from ! articulating fully.

**** If not attached correctly, product and/or phone may dislodge or be thrown intoair in event of crash. Consult your car’s manual to ensure mount does not cover or interfere with operation of airbag

**** Stay safe. Follow local regulations for ! phone use while driving

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

peak design User Manuals

Related Manuals