Peak Design M-MM-AD-BK-WEB-1 Mobile Motorcycle Mount 1 Inch Ball Adapter Instructions
- June 10, 2024
- peak design
Table of Contents
Peak Design M-MM-AD-BK-WEB-1 Mobile Motorcycle Mount 1 Inch Ball Adapter
Product Information
- The product is a phone mount with a ball adapter locking mechanism.
- It requires a Peak Design Case or MagSafe Phone/Case (not included) to be used.
- The mount has two locking teeth and two release buttons, but only one button needs to be pressed to release the phone.
- The mount has four embedded magnets and a vibration dampener to prevent damage to the phone’s camera and absorb vibrations.
- The vibration dampener allows for some movement of the mount head.
Product Usage Instructions
- Attach the Peak Design 1 Ball Adapter to a 3rd party 1 ball and socket mount and tighten it to 3rd-party specifications.
- Place the phone on the mount and listen for a click to ensure that the phone is locked in place. Note that this requires a Peak Design Case (sold separately).
- To detach the phone, push either of the release buttons and pull the phone outward. Do not interact with or remove your phone from the mount while in motion for safety reasons.
GET TO KNOW YOUR MOUNT
requires Peak Design Case or MagSafe Phone/Case not included
INSTALLATION
Connect Peak Design 1” Ball Adapter to 3rd party 1” ball and socket mount. Tighten to 3rd-party specifications.
Stay safe. Do not interact with or remove your phone from the mount while in motion.
ATTACH/DETACH PHONE
To attach, place phone on mount and listen for “click” to ensure phone is locked. Requires Peak Design Case (sold separately)
To detach, push EITHER of the Release Buttons and pull phone outward
more info
pkdsn.com/balladapter
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>