peak design M-CK-AA-BK-WEB-1 Mobile Creator Kit Instructions

CREATOR KIT INSTRUCTIONS

M-CK-AA-BK-WEB-1 Mobile Creator Kit

GET TO KNOW YOUR MOUNT
Requires Peak Design Case
Not included

ARCA INSTALLATION

1. Connect Creator Kit Arm to provided Arca Adapter, affix with provided Thumbscrew.
2. Attach plate to any Arca compatible tripod, including Peak Design Tripods.

GOPRO INSTALLATION

1. Tighten Creator Kit Arm directly to any 3rd-party GoPro mount using provided Thumbscrew.

CAPTURE INSTALLATION

1. Connect Creator Kit Arm to provided Arca Adapter, tighten with Thumbscrew.
2. Slide Arca Adapter into Capture. Attach phone to SlimLink™ Mount Head in landscape mode. If needed, tighten Stabilizer Screw to eliminate play.

1/4”-20 INSTALLATION

1. Install Creator Kit Arm to provided 1/4”-20 Adapter.
2. Connect Creator Kit to 1/4”-20 screw.

USE

Attach/Detach Phone
Requires Peak Design Case (sold separately).
Place phone on mount and listen for audible “click” to ensure your phone is locked. To remove, push just one of the Release Buttons and pull phone.

Rotate
Use the provided Thumbscrew to adjust Creator Kit Arm angle.
More info – pkdsn.com/creatorkit

Documents / Resources

| peak design M-CK-AA-BK-WEB-1 Mobile Creator Kit [pdf] Instructions
M-CK-AA-BK-WEB-1 Mobile Creator Kit, Mobile Creator Kit, M-CK-AA-BK-WEB-1, Creator Kit, Mobile Creator, Creator
---|---

References

• Mobile Creator Kit | Peak Design Official Site

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>