DH Lifelabs AS04AC-1 Aaira HEPA Remote Control User Manual

DH Lifelabs AS04AC-1 Aaira HEPA Remote Control

Product Information

• The product is an air purifier with a remote control that allows you to control its functions from a distance. The remote control operates using a CR2032 battery and has functions such as on/off, disinfect, fan speed, timer, and sleep mode. The operating range of the remote is approximately 5 meters.
• The product comes with safety instructions for the use of batteries with the remote control. Different types of batteries or new and used batteries should not be mixed. Batteries should be inserted with the correct polarity, and exhausted batteries should be removed from the device and safely disposed of. If the device is to be stored unused for a long period, the batteries should be removed. Non-rechargeable batteries are not to be recharged, and the supply terminals are not to be short-circuited.
• The part number of the product is AS04AC-1.

Product Usage Instructions

Pairing the Remote

1. Follow the instructions for setting up the air purifier. Make sure the air purifier is plugged in and turned off.
2. Press and hold the fan speed and sleep buttons on the remote control.
3. The device will turn on if the pairing is successful.

Using the Remote Control

• On/Off: Press the on/off button to turn the air purifier on or off.
• Disinfect: Press the disinfect button to activate the air purifier’s disinfecting function.
• Fan Speed: Press the fan speed button to adjust the air purifier’s fan speed.
• Timer: Use the timer button to set the air purifier to run for a specific amount of time.
• Sleep Mode: Press the sleep mode button to activate the air purifier’s sleep mode function.

Battery Replacement

1. Follow the directions and use a screwdriver to open the battery compartment cover.
2. Push down the cover to reveal the battery.
3. Remove the old battery and dispose of it properly.
4. Insert the replacement CR2032 battery.
5. Install the battery compartment cover and secure it with the screwdriver.

If you need further assistance with the product, you can contact customer support at 0300 373 0739.

Safety Instructions

• Different types of batteries or new and used batteries are not to be mixed
• Batteries are to be inserted with the correct polarity
• Exhausted batteries are to be removed from the device and safely disposed of
• If the device is to be stored unused for a long period, the batteries should be removed
• Non-rechargeable batteries are not to be recharged
• The supply terminals are not to be short-circuited.

Pairing the Remote

1. Follow the instructions for setting up the device. Make sure the device is plugged in and turned off.
2. Press and hold the fan speed and sleep buttons on the remote.
3. The device will turn on if successful.
4. The operating range of the remote is approximately 5 meters.

Battery Replacement

1. Follow the direction and use a screwdriver to open the battery compartment cover.
2. Push down the cover.
3. Remove the battery and dispose of it properly.
4. Insert replacement battery.
5. Install the battery compartment cover and secure it with the screwdriver.

• Need Help?
• 0300 373 0739
• 9 AM–5 PM, Monday–Friday

Documents / Resources

| DH Lifelabs AS04AC-1 Aaira HEPA Remote Control [pdf] User Manual
AS04AC-1 Aaira HEPA Remote Control, AS04AC-1, Aaira HEPA Remote Control, HEPA Remote Control, Remote Control, Control
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>