DH Lifelabs CAHP-50GC02C Sciaire and HEPA Air Purifier User Guide
- June 9, 2024
- DH Lifelabs
Table of Contents
Sciaire + HEPA
QUICK START GUIDE | CAHP-50GC02C
Created by nature.
Engineered by science.
User Guide
CONNECT
YOUR DEVICE WITH DH LIFELABS APP
Your safety is important to us.
Read all safety instructions before you use the device.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY PLEASE ADHERE TO THE FOLLOWING:
! This product complies with the maxiumum allowable concentration of ozone of
0.050 parts per million by volume (ppmv) in a 24 hour period.
! Always place device on a firm, flat level surface that is secure. Do not
place device where it is likely to be bumped or knocked over.
! Do not sit, stand, or place heavy objects on the device.
! The device must be in the upright position at all times.
! NEVER place containers with liquid or drinks on top of the device. Spilling
liquids into it can damage the device and potentially cause electric shock or
create a fire hazard.
! THIS MACHINE IS NOT INTENDED FOR USE BY CHILDREN. Keep away from small
children and pets.
! This machine is not intended for use by persons with reduced physical,
sensory or reasoning capabilities or lack of experience or knowledge unless
they have been given supervision or instruction concerning the use of the
machine by a person responsible for their safety.
! This machine is intended for household and indoor use only. Do not use
outdoors.
! Only use the device after fully assembled.
! Only use this device with supplied accessories.
! Do not allow foreign objects to enter ventilation or exhaust opening as this
may cause electric shock or damage to the device. Do not block air outlets or
intakes.
! Do not cover the machine while in use.
! For best performance, place the machine on the floor at least 3 feet from
any wall or appliance.
! Always follow basic precautions when using device to reduce the risk of
fire, electric shock, and personal injury.
! Ensure the electrical outlet used with the device is not loose or damaged. A
poor electrical connection can result in overheating and damage to the power
cord.
! To disconnect the device, make sure it is powered off, then grip the plug
and pull it from the wall outlet. NEVER pull the cord to unplug it.
! Do not use if the power cord or plug is damaged.
! Keep the power cord away from hot surfaces.
! Do not use if you believe the device has been damaged or is faulty. If the
device is not working properly or has been dropped or damaged, contact
customer support for repair.
! Do not route the power cord under or cover it with carpet. Route the power
cord to minimize the possibility that someone could trip over it.
! Do not expose the device to moisture: avoid areas where it might come in
contact with water such as bathrooms or laundry rooms.
! Disconnect all power to the device and turn off all controls before
unplugging.
Always unplug the machine if not in use and while cleaning.
! The device is not user serviceable.
Do not attempt to repair the product yourself. In the event of failure,
contact customer support for repair or replacement.
Read all safety instructions in the quick start guide, instruction manual, and on device.
Product Overview
- Control Panel
- PlasmaShield™ Generators (Internal)
- PlasmaShield™ Generators (Internal)
- H13 True HEPA Filter
- Bottom Cover
Quick Start Guide
1 Detach magnetic bottom cover.| 2 Remove H13 HEPA filter from plastic bag,
and install it in device.
---|---
|
3 Replace magnetic bottom cover| 4 Connect the AC adapter to the device, plug
into an outlet, and press the power button to turn on.
|
Control Panel
| Wi-Fi Indicator
Flashing amber: Attempting to connect
Steady amber: Connection successful
Steady red: Not connected
Connect/disconnect: Short press
---|---
| Timer
(2H/4H/8H) Set the timer to have the machine turn off automatically
| Sleep Mode
Lowest fan speed level that is ultra-quiet
| On/Off
Powers the device on and off
| Auto Mode
Blue: Air Quality Good
Yellow: Air Quality Moderate
Red: Air Quality Poor
| Fan Speed
(1/2/3) Three fan speeds
| Plasma On/Off
Press the icon to toggle the plasma purification function on or off
| Filter Replacement Indicator
After changing filter, press for 3 seconds to reset the filter life countdown
Real-Time Air Quality Indicator
Connectivity
Sciaire + HEPA can connect with your smart device when you download the DH
Lifelabs App. Follow the steps below and/or in the App.
Works with Google Home or Amazon Alexa.
- On your smartphone, install DH Lifelabs app and turn your Bluetooth function on.
- Turn the device on.
- Open DH Lifelabs app and add the device.
- When the app indicates, press and hold the Wi-Fi Indicator for 3 seconds.
- The app should connect to the device over your Wi-Fi network and the Wi-Fi Indicator will illuminate amber.
To disconnect from the network, press the Wi-Fi Indicator. The unit will beep and the indicator will illuminate red.
Cleaning and Maintenance
Always unplug the machine if not in use and while cleaning.
When the device is not used for an extended time, store it in a cool dry
place. Do not store the device where it might be exposed to excess moisture or
direct sunlight. May not operate effectively in freezing temperatures. Use a
dry cloth to clean the exterior of the device. Do not use any chemicals or
cleaners.
Cleaning the Air Quality Sensor
The inlet for the air quality sensor is located at the back of the machine as
shown. The inlet should be cleaned every 2 months using a vacuum or with a
cotton swab that has been lightly moistened with clean water.
We’re saving some paper.
View your manual online.
dhlifelabs.com/help-support/
*The Sciaire + HEPA uses Plasma Technology.
**Dispose used products according to local regulations.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc., registered in
the U.S. and other countries. Google, Google Play and Google Home are
trademarks of Google LLC. Amazon, Alexa, and all related marks are trademarks
of Amazon.com, Inc. or its affiliates.
Need Help?
1-877-548-9722
9 AM–6 PM, CST, Monday–Friday Dernier & Hamlyn Inc.
720 Northgate Parkway
Wheeling, IL 60090
EPA EST. NO. 99117-CHN-1
MADE IN CHINA