DH Lifelabs CAHP-20GC01 Sciaire Mini + HEPA Air Purifier User Guide
- June 10, 2024
- DH Lifelabs
Table of Contents
DH Lifelabs CAHP-20GC01 Sciaire Mini + HEPA Air Purifier
Product Information
The Sciaire Mini + HEPA is an air purifier that uses PlasmaShieldTM Technology
to generate positive and negative ions to remove 99.90% of bacteria and
viruses in the air. The device is designed for household and indoor use only
and comes with an adaptor model HCX36012401500B.
It is important to read the full instruction manual online and all safety
instructions before using the device. The device complies with the maximum
allowable concentration of ozone of 0.050 parts per million by volume (ppmv)
in a 24-hour period.
Product Usage Instructions
- Always place the device on a firm, flat, level surface that is secure. Do not place the device where it is likely to be bumped or knocked over.
- Ensure the device is in an upright position at all times.
- Never place containers with liquid or drinks on top of the device as spilling liquids into it can damage the device and potentially cause electric shock or create a fire hazard.
- The device is not recommended for use by children under the age of 8, and children and vulnerable consumers should have adequate supervision or instruction when interacting with the device.
- Only use the device after fully assembled and with supplied accessories.
- Do not allow foreign objects to enter the ventilation or exhaust opening as this may cause electric shock or damage to the device. Do not block air outlets or intakes.
- Do not cover the device while in use.
- For best performance, place the device on the floor at least 3 feet from any wall or device.
- Always follow basic precautions when using the device to reduce the risk of fire, electric shock, and personal injury.
- Do not expose the device to moisture and avoid areas where it might come in contact with water such as bathrooms or laundry rooms.
- Disconnect all power to the device and turn off all controls before unplugging. Always unplug the device if not in use and while cleaning.
- Ensure the electrical outlet used with the device is not loose or damaged. A poor electrical connection can result in overheating and damage to the power cord.
- The device is not user serviceable. Do not attempt to repair the product yourself. In the event of failure, contact customer support for repair or replacement.
- To disconnect the device, make sure it is powered off, then grip the plug and pull it from the wall outlet. NEVER pull the cord to unplug it.
- The input voltage is 100-240V, 50-60 Hz.
- Do not use if the power cord or plug is damaged.
- Keep the power cord away from hot surfaces.
- Do not use if you believe the device has been damaged or is faulty. If the device is not working properly or has been dropped or damaged, contact customer support.
Your safety is important to us.
Please read the full instruction manual online and all safety instructions
before you use the device.
WARNING! TO REDUCE THE RISK OFFIRE, ELECTRIC SHOCK OR INJURY PLEASE
ADHERE TO THE FOLLOWING:
- This device complies with the maxiumum allowable concentration of ozone of 0.050 parts per million by volume (ppmv) in a 24 hour period.
- Always place device on a firm, flat level surface that is secure. Do not place device where it is likely to be bumped or knocked over.
- Do not sit, stand, or place heavy objects on the device.
- The device must be in the upright position at all times.
- NEVER place containers with liquid or drinks on top of the device. Spilling liquids into it can damage the device and potentially cause electric shock or create a fire hazard.
- This device is not recommended for use by children under the age of 8, and children and vulnerable consumers should have adequate supervision or instruction when interacting with the device.
- This device is intended for household and indoor use only. Do not use outdoors.
- Only use the device after fully assembled.
- Only use this device with supplied accessories.
- Do not allow foreign objects to enter ventilation or exhaust opening as this may cause electric shock or damage to the device. Do not block air outlets or intakes.
- Do not cover the device while in use.
- For best performance, place the device on the floor at least 3 feet from any wall or device.
- Always follow basic precautions when using device to reduce the risk of fire, electric shock, and personal injury.
- Ensure the electrical outlet used with the device is not loose or damaged.
- A poor electrical connection can result in overheating and damage to the power cord.
- To disconnect the device, make sure it is powered off, then grip the plug and pull it from the wall outlet. NEVER pull the cord to unplug it.
- Do not use it if the power cord or plug is damaged.
- Keep the power cord away from hot surfaces.
- Do not use it if you believe the device has been damaged or is faulty. If the device is not working properly or has been dropped or damaged, contact customer support.
- Do not route the power cord under or cover it with carpet. Route the power cord to minimize the possibility that someone could trip over it.
- Do not expose the device to moisture: avoid areas where it might come in contact with water such as bathrooms or laundry rooms.
- Disconnect all power to the device and turn off all controls before unplugging. Always unplug the device if not in use and while cleaning.
- The device is not user serviceable.
- Do not attempt to repair the product yourself. In the event of failure, contact customer support for repair or replacement.
- The input voltage is 100-240V, 50-60 Hz.
- Only use with adaptor model HCX3601- 2401500B provided with the device
- Read all safety instructions in this quick start guide, the online instruction manual, and on the device.
Product Overview
- Main Body
- PlasmaShield™ Generators (Internal)
- PlasmaShield™ Generators (Internal)
- H13 True HEPA Filter
- Bottom Cover
- Power Cord
Quick Start Guide
- Twist and detach the bottom cover.
- Remove the H13 HEPA filter from a plastic bag, and install it on the device.
- Replace the bottom cover.
- Connect the AC adapter to the device, plug it into an outlet, and press the power button to turn on
Control Panel
-
Timer
- (2H/4H/8H) Set the timer to have the device turn off automatically
-
Sleep Mode
- The lowest fan speed level is ultra-quiet
-
On/Off
- Powers the device on and off
-
Auto Mode
- Blue: Air Quality Good
- Yellow: Air Quality Moderate
- Red: Air Quality Poor
-
Fan Speed
- (1/2/3) Three fan speeds
-
Plasma On/Off
- Press the icon to toggle the plasma purification function on or off
-
Filter Replacement Indicator
- After changing a filter, press for 3 seconds to reset the filter life countdown
Real-Time Air Quality Indicator Ring
Cleaning and Maintenance
- Always unplug the device if not in use and while cleaning.
- When the device is not used for an extended time, store it in a cool dry place. Do not store the device where it might be exposed to excess moisture or direct sunlight. May not operate effectively in freezing temperatures. Use a dry cloth to clean the exterior of the device. Do not use any chemicals or cleaners.
Cleaning the Air Quality Sensor
- The inlet for the air quality sensor is located at the back of the device as shown.
- The inlet should be cleaned every 2 months using a vacuum or with a cotton swab that has been lightly moistened with clean water.
- Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
- We’re saving some paper.
- View the full instruction manual
- https://dhlifelabs.co.uk/help-support/
- Need Help?
- 0300 373 0739
- 9 AM–5 PM, Monday–Friday
- Dernier & Hamlyn Products Ltd.
- 201 Hollymoor Way, Rubery,
- Birmingham B31 5HE,
- United Kingdom
- MADE IN CHINA
- This symbol on the product or on its packaging indicates that the product must not be disposed of with normal household waste. Instead, it is your responsibility to dispose of your waste equipment by arranging to return it to a designated collection point for the recycling of waste electrical and electronic equipment. By separating and recycling your waste equipment at the time of disposal you will help to conserve natural resources and ensure that the equipment is recycled in a manner that protects human health and the environment. For more information about how to recycle your DH Lifelabs-supplied products for recycling, please contact our Customer Services Department at 0300 373 0739 or visit https://dhlifelabs.co.uk.
- The Sciaire Mini + HEPA uses PlasmaShield™ Technology, which generates positive and negative ions to remove 99.90% of bacteria and viruses in the air.
References
- DH Lifelabs | Cleaner Homes with Our Natural Products & Solutions
- Get Support from Our Team | DH Lifelabs UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>