DH Lifelabs CAHP-50WC02C Sciaire HEPA Air Purifier User Guide

: June 10, 2024
: DH Lifelabs

Table of Contents

CAHP-50WC02C Sciaire HEPA Air Purifier
Product Overview
Quick Start Guide
Control Panel
Real-Time Air Quality Indicator
Connectivity
Cleaning and Maintenance
Documents / Resources

CAHP-50WC02C Scoriae HEPA Air Purifier
DH Lifelabs CAHP 50WC02C Sciaire HEPA Air Purifier

User Guide

CONNECT
YOUR DEVICE WITH
DH LIFELABS APP

CAHP-50WC02C Sciaire HEPA Air Purifier

Your safety is important to us.
Please read the full instruction manual online and all safety instructions before you use the device.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY PLEASE ADHERE TO THE FOLLOWING:
! This device complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume (ppmv) in a 24 hour period.
! Always place device on a firm, flat level surface that is secure. Do not place device where it is likely to be bumped or knocked over.
! Do not sit, stand, or place heavy objects on the device.
! The device must be in the upright position at all times.
! NEVER place containers with liquid or drinks on top of the device. Spilling liquids into it can damage the device and potentially cause electric shock or create a fire hazard.
! This device is intended for household and indoor use only. Do not use outdoors.
! This device is not recommended for use by children under the age of 8, and children and vulnerable consumers should have adequate supervision or instruction when interacting with the device.
! Only use the device after fully assembled.
! Only use this device with supplied accessories.
! Do not allow foreign objects to enter ventilation or exhaust opening as this may cause electric shock or damage to the device. Do not block air outlets or intakes.
! Do not cover the device while in use.
! Locate the device near an outlet and avoid using an extension cord or power strip.
! For best performance, place the device on the floor at least 3 feet from any wall or device.
! Always follow basic precautions when using device to reduce the risk of fire, electric shock, and personal injury.
! Ensure the electrical outlet used with the device is not loose or damaged.
A poor electrical connection can result in overheating and damage to the power cord.
! To disconnect the device, make sure it is powered off, then grip the plug and pull it from the wall outlet. NEVER pull the cord to unplug it.
! Keep the power cord away from hot surfaces.
! Do not use if you believe the device has been damaged or is faulty. If the device is not working properly or has been dropped or damaged, contact customer support.
! Do not route the power cord under or cover it with carpet. Route the power cord to minimize the possibility that someone could trip over it.
! Do not expose the device to moisture: avoid areas where it might come in contact with water such as bathrooms or laundry rooms.
! Disconnect all power to the device and turn off all controls before unplugging. Always unplug the device if not in use and while cleaning or other maintenance.
! The device is not user serviceable. Do not attempt to repair the device yourself. In the event of failure, contact customer support.
! If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
! The input voltage is 220-240V, 50-60Hz.
Read all safety instructions in this quick start guide, the online instruction manual, and on device.

Product Overview

DH Lifelabs CAHP 50WC02C Sciaire HEPA Air Purifier - Product
Overview

Main Body
Plasma Shield™ Generators (Internal)
Plasma Shield™ Generators (Internal)
H13 True HEPA Filter
Bottom Cover

Quick Start Guide

Detach magnetic bottom cover.
Remove H13 HEPA filter from plastic bag, and install it in device.
Replace magnetic bottom cover.
Connect the AC adapter to the device, plug into an outlet, and press the power button to turn on.

Control Panel

DH Lifelabs CAHP 50WC02C Sciaire HEPA Air Purifier - Control
Panel

| Wi-Fi Indicator
Flashing amber: Attempting to connect
Steady amber: Connection successful
Steady red: Not connected
Connect/disconnect: Short press
---|---
| Timer
(2H/4H/8H) Set the timer to have the device turn off automatically
| Sleep Mode
Lowest fan speed level that is ultra-quiet
| On/Off
Powers the device on and off
| Auto Mode
Blue: Air Quality Good
Yellow: Air Quality Moderate
Red: Air Quality Poor
| Fan Speed
(1/2/3) Three fan speeds
| Plasma On/Off
Press the icon to toggle the plasma purification function on or off
| Filter Replacement Indicator
After changing filter, press for 3 seconds to reset the filter life countdown

Real-Time Air Quality Indicator

DH Lifelabs CAHP 50WC02C Sciaire HEPA Air Purifier - Quality
Indicator

Connectivity

Scoriae + HEPA can connect with your smart device when you download the DH Life labs App. Follow the steps below and/or in the App.
Works with Google Home or Amazon Alexa.

DH Life labs App

On your smartphone, install DH Life labs app and turn your Bluetooth function on.
Turn the device on.
Open DH Life labs app and add the device.
When the app indicates, press and hold the Wi-Fi Indicator for 3 seconds.
The app should connect to the device over your Wi-Fi network and the Wi-Fi Indicator will illuminate amber.

To disconnect from the network, press the Wi-Fi Indicator. The device will beep and the indicator will illuminate red.

Cleaning and Maintenance

DH Lifelabs CAHP 50WC02C Sciaire HEPA Air Purifier - Cleaning and
Maintenance

When the device is not used for an extended time, store it in a cool dry place. Do not store the device where it might be exposed to excess moisture or direct sunlight. May not operate effectively in freezing temperatures. Use a dry cloth to clean the exterior of the device. Do not use any chemicals or cleaners.

Cleaning the Air Quality Sensor
The inlet for the air quality sensor is located at the back of the device as shown. The inlet should be cleaned every 2 months using a vacuum or with a cotton swab that has been lightly moistened with clean water.

DH Lifelabs CAHP 50WC02C Sciaire HEPA Air Purifier - qr
code https://qrco.de/bdEB0s
We’re saving some paper.
View the full instruction manual online before use.
https://dhlifelabs.co.uk/help-support/
Need Help?
0300 373 0739
9 AM–5 PM, Monday–Friday

Dernier & Hamlyn Products Ltd.
201 Holly moor Way, Rubery,
Birmingham B31 5HE,
United Kingdom
MADE IN CHINA

*This symbol on the product or on its packaging indicates that the product must not be disposed of with normal household waste. Instead, it is your responsibility to dispose of your waste equipment by arranging to return it to a designated collection point for the recycling of waste electrical and electronic equipment. By separating and recycling your waste equipment at the time of disposal you will help to conserve natural resources and ensure that the equipment is recycled in a manner that protects human health and the environment. For more information about how to recycle your DH Life labs supplied products for recycling, please contact our Customer Services Department on 0300 373 0739 or visit https://dhlifelabs.co.uk.
**The Scare + HEPA uses Plasma Shield™ Technology, which generates positive and negative ions to remove 99.99% of bacteria and viruses in the air.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google, Google Play and Google Home are trademarks of Google LLC. Amazon, Alexa, and all related marks are trademarks of Amazon.com, Inc. or its affiliates.

Documents / Resources

| DH Lifelabs CAHP-50WC02C Sciaire HEPA Air Purifier [pdf] User Guide
CAHP-50WC02C Sciaire HEPA Air Purifier, CAHP-50WC02C, Sciaire HEPA Air Purifier, Air Purifier, Purifier
---|---