DH Lifelabs CAHP-03WH09 Sciaire Portable Air Purifier User Guide
- June 10, 2024
- DH Lifelabs
Table of Contents
DH Lifelabs CAHP-03WH09 Sciaire Portable Air Purifier
Product Overview
- Main Body: The main component of the Sciaire Portable air purifier
- 3-in-1 Filter: A filter that combines a pre-filter, HEPA filter, and activated carbon filter to capture pollutants and odors from the air
- Bottom Cover: A cover that can be removed to access the filter for replacement
- USB Power Cord: A cord used to power the device through a USB port
Product Usage Instructions
- Connect the USB power cord to the Sciaire Portable device and plug it into a USB port.
- Press the power symbol for one second to turn on the device.
- The device has two purification speeds: low and high. Press the power symbol again to switch between them.
- To turn off the device, press the power symbol for two seconds.
- To replace the filter, remove the bottom cover and replace the old filter with a new 3-in-1 filter. See page 6 of the instruction manual for details.
The Sciaire Portable air purifier is a versatile device that can be used in various settings such as in a car, nursery, on a desk, during travel, at work, or in an office. However, to ensure safety, it is important to read all safety instructions in the quick start guide, instruction manual, and on the device before using it. The device should only be used as described in the instruction manual and should not be operated while driving or placed in areas that obstruct the driver’s visibility. Additionally, care should be taken to not handle the USB plug with wet hands, and foreign objects should not be allowed to enter the ventilation or exhaust opening. Users should also exercise caution when removing the USB power cord and not yank it out of the plug. If the USB plug or power cord is damaged or if the device has been damaged, it should not be used.
The Sciaire Portable air purifier uses Plasma Technology and should be disposed of according to local regulations. As a responsible user, it is important to dispose of used products properly to prevent harm to the environment.
Your safety is important to us
Read all safety instructions before you use the device.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY PLEASE
ADHERE TO THE FOLLOWING:
Use only as described in the Instruction Manual. Do not carry out any
maintenance other than that shown in this guide or as advised by customer
support.
- Do not operate this device while driving.
- Do not place device in areas that will obstruct the driver’s visibility while driving.
- Do not handle USB plug with wet hands.
- Always place device on a firm, flat level surface that is secure. Do not place device where it is likely to be bumped or knocked over.
- Do not sit, stand, or place heavy objects on the device.
- The device must be in the upright position at all times.
- NEVER place containers with liquid or drinks on top of the device. Spilling liquids into it can damage the device and potentially cause electric shock or create a fire hazard.
- THIS MACHINE IS NOT INTENDED FOR USE BY CHILDREN. Keep away from small children and pets.
- Not intended for outdoor use. Do not use outdoors.
- Only use the device after fully assembled.
- Only use this device with supplied accessories.
- Do not allow foreign objects to enter ventilation or exhaust opening as this may cause electric shock or damage to the device. Do not block air outlets or intakes.
- Always follow basic precautions when using device to reduce the risk of fire, electric shock, and personal injury.
- Do not remove the USB power cord until the device is turned off. Exercise care when removing the power cord from the USB plug. Do not yank power cord out of the USB plug.
- Do not use if USB plug/power cord is damaged.
- Do not use if you believe the device has been damaged or is faulty. If the device is not working properly or has been dropped or damaged, contact customer support for repair.
- Keep the USB power cord away from hot surfaces.
- To minimize the risk of a tripping hazard, do not place USB plug/power cord under carpet or cover it.
- Do not expose the device to moisture: avoid areas where it might come in contact with water such as bathrooms or laundry rooms.
- Ensure the USB outlet used is not loose or damaged. A poor electrical connection can result in electric shock, overheating of the device or damage to the device or the power cord.
- Disconnect all power to the device before cleaning it.
- The device is not user serviceable. Do not attempt to repair the product yourself. In the event of failure, contact customer support for repair or replacement.
- This device complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume (ppmv) in a 24 hour period.
- The device is not to be operated by any supply sources other than those specified here. The device is to be used only with the following products: 1) Information and Communication Technology Equipment; or 2) A Class 2 Power Unit.
Quick Start
-
Step One
Connect power cord to device and plug into USB port. -
Step Two
Press the power symbol for one second to turn device on and press again to switch purification speed: -
Step Three
Press power symbol for two seconds to power off.
Clear Air Wherever You Go
-
Car
Plugs right into the 12V outlet to freshen interior air. -
Nursery
Keep your baby’s environment clean and fresh. -
Desk
Compact enough to fit on your desk. -
Travel
Pack it on trips to freshen hotel room air. -
Work
Keeps germs at bay and your work environment fresh. -
Office
Place it in your cubicle to keep your personal space smelling fresh and clean.
Device Specifications
- Input Voltage: DC5V/2W
- Dimensions:
- Bottom Diameter 2.8 inch (7 cm)
- Top Diameter 3.9 inch (10 cm)
- Height 6.8 inch (17.2 cm)
- Noise: <25 dB
- Net Weight: 0.84 lbs (380 g)
Cleaning and Maintenance
It is recommended to replace the filter every 6 months or when the power
symbol has a red indication light.
NOTE: The filter is not washable. Do not immerse it in water.
-
Step One
Make sure the device is OFF and unplugged. -
Step Two
Twist open and remove the bottom cover from the device. -
Step Three
Remove the old filter and replace it with the new one. -
Step Four
Attach the bottom cover and twist close.
To reset the red indication light, hold button for 3 Seconds.
Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
We’re saving some paper.
View your manual online.
dhlifelabs.com/help-support/
Need Help?
1-877-548-9722
9 AM–6 PM, CST, Monday–Friday
Dernier & Hamlyn Inc.
720 Northgate Parkway
Wheeling, IL 60090
- The Sciaire Portable uses Plasma Technology.
- Dispose used products according to local regulations.
References
- Get Support from Our Team | DH Lifelabs
- DH Lifelabs | Cleaner Homes with Our Natural Products & Solutions
- Get Support from Our Team | DH Lifelabs UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>