xiamen V7232-8 Wall Hung Smart Toilet User Manual

xiamen V7232-8 Wall Hung Smart Toilet

Product Information V7232-3 / V7232-8

Thank you for choosing our product. The V7232-3 / V7232-8 is an electric appliance that can be used as a toilet seat bidet. It comes with several features such as lid auto open/close, LED display, and spray nozzle. Please read the instructions carefully before installation and keep it available for future maintenance or reference.

Specification Parameters

• Model: V7232-3 / V7232-8
• Type: Electric Bidet Toilet Seat
• Power Supply: AC 220V~240V, 50/60Hz
• Power Consumption: 1250W (Max)
• Water Pressure: 0.05MPa~0.7MPa
• Water Temperature: 4°C~35°C
• Dimensions: V7232-3 – 500mm x 430mm x 180mm; V7232-8 – 520mm x 450mm x 180mm

Safety Instructions

When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following:

• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Read all instructions before using.

Product Usage Instructions

Please follow the below instructions for safe and proper usage of the V7232-3 / V7232-8:

1. Close supervision is necessary when this product is used by, on, or near children or individuals with disabilities.
2. Use this product only for its intended use as described in the manual. Do not use attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never use while sleeping or drowsy.
6. Never drop or insert any object into any opening or hose.
7. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
8. Connect this product to a properly grounded outlet only. See Grounding Instructions.
9. Do not throw cigarettes and other burning materials into toilet, otherwise it might cause fire.
10. This product is an electric appliance, so it must be placed far away from water and other liquid.
11. Do not lay the product on its side or upside down during the electrical circuit.
12. It is prohibited to use other electric appliances in the same socket.
13. It is forbidden to use the power extension or unstable loose outlet.
14. Do not reuse any existing water supply hoses, otherwise it might cause leakage, fire or electrical shock. Installation should include specified components and a new water supply hose.

SAFETY INSTRUCTIONS

When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following:

1. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
2. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
3. Children shall not play with the appliance.
4. Cleaning and user maintenance shall not be made by children without supervision.

READ ALL INSTRUCTIONS BEFORE USING

DANGER
To reduce the risk of electrocution:

1. Do not place or store product where it can fall or be pulled into a tub or sink.
2. Do not place in or drop into water or other liquid.
3. Do not reach for a product that has fallen into water. Unplug immediately.
4. Do not wash the main unit or electrical plug with water or detergent.
5. Do not handle the electrical plug with wet hands.
6. Never block the outlet of the air dryer.
7. Never disassemble, repair or modify this product.
8. During installation, disassembly, repair and maintenance of the product, the power plug must be switched off and water supply be shut off.

WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons.

1. Close supervision is necessary when this product is used by, on, or near children or individuals with disabilities.
2.  Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never use while sleeping or drowsy.
6. Never drop or insert any object into any opening or hose.
7. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
8. Connect this product to a properly grounded outlet only. See Grounding Instructions.
9. Do not throw cigarettes and other burning materials into toilet, otherwise it might cause fire.
10. This product is an electric appliance, so it must be placed far away from water and other liquid.
11. Do not lay the product on its side or upside down during the electrical circuit.
12. It is prohibited to use other electric appliances in the same socket.
13. It is forbidden to use the power extension or unstable loose outlet.
14. Do not reuse any existing water supply hoses, otherwise it might cause leakage, fire or electrical shock. Installation should include specified components and a new water supply hose.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION
Failure to follow the instructions may cause bodily injury or property.

1. Do not install or use the product in wet places such as a steam room etc.
2. It is recommended to use water-proof electrical outlet which should be installed in a place where is not easily to get wet.
3. This product should be used with 110V-120V, 50/60Hz electrical current only, load current is at least 15A. Power plug must be equipped with ground fault circuit interrupter or ground fault electrical leakage protector or similar high sensitive, rapid type leakage switch. (Rated sensitive current under 6mA).
4. When it thunders, it is strongly recommended to pull out the power plug.
5. Do not stand on product unit, seat and lid.
6. Do not lean against the lid when using the product, to avoid damage.
7. This product is equipped with a soft-closing seat and lid. Do not push the toilet seat closed, or damage may occur.
8. Do not use any caustic chemicals or scrubbing brush to clean this product.
9. Exposure to direct sunlight is prohibited.
10. Only use tap water or potable water; otherwise it may cause chafing.
11. Do not connect water supply to a hot water supply. Make sure inlet water temperature is between 3~35℃/37.4~95℉.
12. Raise room temperature to prevent the toilet from damage due to freezing.
13. When not using the product over three(3) days, drain the water out of the toilet and pull the electrical plug from the wall outlet.
14. Stop using the product and shut off the power when product malfunctions. Call for professional service.
15.  Means for full disconnection must be incorporated in series in the power input loop of the same room where the product is installed, that is at the front end of the fixed wiring to ensure safe use.

GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electrical current. The plug must be plugged into an outlet that is properly installed and grounded.

DANGER
Improper use of the grounding plug can result in a risk of electric shock. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat-head terminal. Check with a qualified electrician or serviceman if the grounding wire instructions are not completely understood, or if in doubt as to whether the product is properly grounded. This product is factory equipped with a specific electric cord and plug to permit connection to a proper electric circuit. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. Do not modify the plug provided — if it will not fit the outlet, please have the proper outlet installed by a qualified electrician. If the product must be reconnected for use on a different type of electric circuit, the reconnection should be made by qualified service personnel.

SAVE THESE INSTRUCTIONS

Technical specification

Main Unit

| Rated voltage| 110V-120V, 50/60Hz
Rated power| 905W
Water proof| IPX4
Water pressure range| 0.08MPa – 0.8MPa (static pressure)

Toilet

| Flush volume| 1.6/1.1Gpf, 6.0L(full flush) /4.2L(half flush)
Flushing mode| Washdown
Outlet height| 212mm
Outlet outside diameter| 102mm
Drainage method| P-trap

Cleaning device

| Heating power| 1400W
Water temperature| 6-level adjustment (Neutral level included)
Water volume| 3-level adjustment
Cleaning mode| Rear washing /Oscillating washing, Front washing /Oscillating washing
Nozzle position| 5-level adjustment
Water pressure protector| Pressure maintaining device, Automatic pressure relief device
Anti-fouling device| Automatic nozzle cleaning, Anti-syphon device, Anti- backflow device, Filter device

Safety device

| Thermal fuse, Water temperature sensor,

Ground protection, Thermostat, Over temperature protection, Leakage protection device

Drying device

| Warm air speed| Over 4m/s
Warm air temperature| 6-level adjustment (Neutral level included)
Heating power| 200W
Safety device| Thermal fuse, Leakage protection device, Thermostat
Deodorization (optional)| Deodorization method| ****

Photocatalyst-free

Sterilization (optional)| Sterilization device| ****

Plasma sterilization

Heated seat

| Surface temperature| 6-level adjustment (Neutral level included)
Heating power| 50W
Burn protection| After 10 minutes of use, the seat temperature will automatically drop slowly to a low level
Safety device| Seat sensor, temperature sensor, thermal fuse, thermostat, leakage protection device

Caring device

| Night light assembly| Intelligent, Always on, Always off
---|---|---
Noise-free setting| The buzzer is off at night for a quiet environment.
User ID setting| To avoid interference when used by multiple users
Automatic flushing| Toilet will automatically flush as user walks away from bowl.
Foot sensor function (optional)| Activate lid opening (optional)
Activate a half flush (optional)
Difference description| Lid opening (optional)| ****

Soft close

| ****

Lid auto-open

Antibacterial site| Seat, Nozzle

Rated power:
Under the condition of ambient temperature 23℃/73℉, water static pressure 0.18MPa±0.02MPa, water temperature 15℃/59℉, power toilet on, set water pressure, seat temperature, water temperature to the highest level in turn and perform one rear washing cycle.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

The remote control operates at 2.4 GHz frequency. The main unit performs corresponding function upon the signal from remote control.
The lid auto open sensor module operates at 24 GHz frequency. The module will sense movement and open the lid when approached.(Only for the product with lid auto opening/closing function).

Parts identification

Left side

Right side

Lid auto open close

1. Only for the product with lid auto opening/closing function. This function is turned off by default. For the first use, please turn on this function by remote control.

   • Approaching the toilet
     When user enters the sensing range, the ECO lights up and the lid opens automatically.

   • Leaving the toilet
     The lid closes automatically 180 seconds after user leaves.

2. If the model you purchased is with foot sensor,

   • When the seat and lid are both closed, touch the sensing area with your foot to open the lid.
   • When the lid is open and seat is closed, touch the sensing area with your foot to close the lid and activate a half flush.
   • When the seat and lid are open, touch the sensing area with your foot to activate a half flush.

Maintenance

Main unit care and maintenance

1. Shut off power supply before doing maintenance.

2. Use only a soft, damp cloth to clean. Avoid using harsh chemicals.

3. Once cleaning is completed and all surfaces are dry, re-connect the power plug.

Spray nozzle care and maintenance

1.  When no one is seated, turn the knob clockwise. The nozzle will automatically stretch out to allow access for cleaning.

2. When the nozzle moves forward, the nozzle can be removed and cleaned separately.

3. Use only a soft cloth or soft brush to clean. Do not pull or push the wand, to avoid damage.

4. Put the nozzle back and press the knob to return the spray wand to its normal position.

Note:
The spray wand will retract automatically after 10 minutes or if the seat is used.

Filter maintenance

If poor spray performance occurs under normal conditions:

1. Turn off power and ball valve, unscrew water supply hose.

2. Remove the filter.

3. Clean out filter under running water.

4. Reinstall filter and water supply hose, turn on ball valve and connect power.

Emergency troubleshooting

Power and water failure

• Put around 8L water into a barrel and flush the ceramic bowl.
  Note: Avoid water spilling from bowl.

Failure of remote control

1. Operate via knob on the main unit.

2. Battery replacement

   • Remove the remote control from holder.
   • Open the battery cover and replace the batteries.
   • Put the remote control back.

Note
After battery replacement, the settings of auto functions and energy saving will be restored to the defaults. Please reset.

Description of the knob function

1. When seated, turn the knob clockwise to start front washing function, and turn counterclockwise to start rear washing function. Drying and flushing function are activated automatically after first washing completion or pressing knob during washing. When washing again, the same operation only activates drying.
2. When no one is seated, turn the knob clockwise to start manual cleaning function of the nozzle.
3. During rear and front washing, turn the knob clockwise to move the spray wand forward, and counterclockwise to move the spray wand backward; Long press the knob to switch to the water pressure adjustment function. Clockwise rotation increases the water pressure, while counterclockwise rotation decreases the water pressure. (Note: During washing, long press the knob to switch between the functions of water pressure adjustment and spray wand position adjustment.）
4. During drying, clockwise rotation increases air temperature and counterclockwise rotation decreases air temperature.
5. In functional mode, press the knob to stop function in progress: rear washing, front washing, drying or nozzle cleaning. In addition, press the knob to flush the toilet.
6. To enter into standby mode (not seated), press and hold the knob.
7. To enter into functional mode, press and hold the knob.

Note
Default settings for all functions are intermediate when powering on. Use remote control to switch to the function level set before.

LED display description

Only for the toilet with LED display

Description of LED display

1. During self-inspection, icons of sterilization, water temperature, seat temperature and ECO light up, and the temperature is displayed at 88℉. After self-inspection, sterilization, water temperature and ECO icons go off and seat temperature icon lights up, showing current seat temperature. The temperature shows “–” at neutral level.
2. In non-energy-saving mode, seat temperature icon lights up, showing current seat temperature (temperature in neutral shows “–“). During water temperature adjustment, seat temperature icon goes off and water temperature icon lights up, showing current water temperature (temperature in neutral shows “–“). Water temperature icon goes off and seat temperature is displayed after 10 seconds.
3. During washing, seat temperature icon goes off and water temperature lights up, showing current water temperature (temperature in neutral shows “–“).
4. Sterilization icon lights up when this function turned on, otherwise it goes off.
5. In energy saving mode, ECO icon lights up. Seat temperature in neutral shows “–“, otherwise it shows Level 1.
6. LED display goes off completely when shutting down.
7. LED display goes off completely after 30 seconds once no longer being used. When seated or pressing any button, LED display is activated to show current status.
8. When user enters the sensing range, LED display lights up showing current status. Display goes off completely 30 seconds after user leaves. (Only for the toilet with lid auto open/close function.)

Troubleshooting guide

remove the kink
Angle valve is off| Turn on the angle valve
A water failure occurred| Restore the water supply
Poor water spraying| Water supply hose is kinked| Straighten the hose to remove the kink
Angle valve is not fully turned on| Turn on the angle valve fully
Filter is clogged| Clean the filter
Low water temperature| The water temperature is not set properly| Adjust the water temperature
Low seat temperature| The seat temperature is not set properly| Adjust the seat temperature
In standby mode| Switch to functional mode and wait for 3+ minutes
Low dryer temperature| The dryer temperature is not set properly| Adjust the dryer temperature
Dryer not blowing| In standby mode or energy saving mode| Switch to functional mode to use dry function
Spray wand cannot retract| Power off| Push back the spray wand gently and put power on
Get stuck by impurities| Remove the impurities
Spray wand cannot stretch out| Power off| Turn on the power
User is not within the sensing area of the seat| Adjust position on seat to activate the sensor
Remote control cannot display| The positive and negative direction of the batteries is incorrect| Reload the batteries
Low battery| Replace new batteries
Malfunction of deodorization| User is not within the sensing area of the seat| Adjust position on seat to activate the sensor
Deodorization function continues after user leaves| It is normal for the deodorizing function to continue operating after user leaves, for complete odor removal.
Caution| If the problem cannot be resolved as per above solutions, please disconnect the power and contact service providers.
If the power leakage protection switch always trips, it means that the product is leaking. Please disconnect the power and contact service providers.

The picture of product may not be entirely consistent with actual appearance and color because of product improvements, please in kind prevail.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>