PPE 124063000 Bar and Plate Performance Transmission Cooler Installation Guide
- June 10, 2024
- PPE
Table of Contents
Performance
Transmission Cooler Bar and Plate
2011-2014 LML GM 6.6L
Allison 1000/2000 Series
(124063000)
Installation Guide
DISCLAIMER OF LIABILITY
Performance products can increase horsepower above and beyond factory
specifications.
Additional horsepower creates more stress on the drive-train components, which
could result in drive-train failure.
Note regarding emissions-related, non-E.O.-legal products: THESE PRODUCTS ARE
LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR
REGISTERED OR LICENSED FOR HIGHWAY OR OFF-ROAD USE.
This agreement sets forth the terms and conditions for the use of PPE products. The installation of this product indicates that the Buyer has read and understands this agreement and accepts the terms and conditions. PPE (Pacific Performance Engineering) Inc., its distributors, employees, and dealers (the “Seller”) shall not be responsible for the product’s proper use and service. The buyer hereby waives all liability claims. The Buyer hereby acknowledges no reliance on the Seller’s skill or judgment to select or furnish goods suitable for any particular purpose and that there are no liabilities which extend beyond the description on the face hereof, and the Buyer hereby waives all remedies or liabilities expressed or implied, arising by law or otherwise (including without any obligation of the Seller with respect to fitness, merchantability and consequential damages), or whether or not occasioned by the Seller’s negligence. The Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages. The Buyer acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the Buyer agrees to indemnify the Seller and to hold the Seller harmless from any claim related to the item of equipment purchased. Under no circumstances will the Seller be liable for any damages or expenses by reason of use or sale of any such equipment. The Seller assumes no liability regarding the improper installation or misapplication of its products. It is the installer’s responsibility to check for proper installation and if in doubt, contact the manufacturer. The Buyer is solely responsible for all warranty issues from the manufacturer.
LIMITATION OF WARRANTY
The Seller gives Limited Warranty as to description, quality, merchantability,
and fitness for a particular purpose, productiveness, or any other matter of
Seller’s product sold herewith. The Seller shall not be responsible for the
products proper use and service and the Buyer hereby waives all rights other
than those expressly written herein. This warranty shall not be extended,
altered or varied except by a written instrument signed by Seller and Buyer.
Limited lifetime warranty on all PPE cast aluminum products, and PPE
Transmission Coolers. Three (3) year limited warranty on PPE Manifolds and Up-
Pipes Kits, and OEM-Length Up-Pipes. One (1) year limited warranty on all
other PPE products from the date of sale to original buyer and limited solely
to the parts contained within the products kit. All products that are in
question of Warranty must be returned prepaid to the Seller and must be
accompanied by a dated proof of purchase receipt. All Warranty claims are
subject to approval by Seller. Under no circumstances will the Seller be
liable for any labor charged or travel time incurred in diagnosis for defects,
removal, or re- installation – of this product or any other contingent
expenses. Under no circumstances will the Seller be liable for any damage or
expenses incurred by reason of the use or sale of any such equipment. In the
event that the buyer does not agree with this agreement: the buyer may
promptly return this product, in a new and unused condition in its original
packaging, with a dated proof of purchase to the place of purchase within ten
(10) days from date of purchase for a full refund. The installation of this
product indicates that the buyer has read and understands this agreement and
accepts its terms and conditions.
Performance Transmission Cooler
CONTENTS
A: Bar and Plate style Transmission Cooler (1) with transmission cooler
line fttings and clips (2) already installed.
Disassembly
Step 1 Vehicle off. Engine cool.
Step 2 Disconnect fog lights, remove grill, radiator cover, bumper and
bracket.
Step 3 Remove clips and disconnect both driver and passenger transmission
cooler lines.
Wrap using a rag or towel around the ends of the cooler lines to reduce
transmission fluid leaking during installation.
Step 4 Remove stock driver and passenger upper bolts.
Save for later reinstallation.
Step 5 Remove both clip nuts.
Save for later reinstallation.
Step 6 Remove both rubber cushions.
Save for later reinstallation
Step 7 Remove transmission line retaining clip from the back, passenger side
stock transmission cooler bracket.
Save for later reinstallation.
Installation
Step 8 Remove PPE fittings. Apply anticize to both. Install and tighten both
to 80 inch lbs.
Step 9 Install both saved stock rubber cushions on driver and passenger side
lower, rear Transmission Cooler brackets.
Step 10 Install saved stock clip nuts on the driver and passenger side
Transmission Cooler brackets.
Step 11 Install saved transmission line stock retaining clip on the passenger
side Transmission Cooler bracket.
Step 12 Install assembled Transmission Cooler. Position so that the stock
rubber cushions and stock slip nuts line up with their mounting holes. Route
transmission lines as shown.
Install and tighten hardware to secure.
Step 13 Secure passenger side transmission line on reinstalled factory
clip.
Step 14 Snap in transmission lines and slide black retaining clips onto
transmission line fittings. Do this for both passenger and driver side.
Check to be sure connection is tight.
Step 15 Check fitment. Adjust as necessary.
Tighten all hardware.
Step 16 Start engine. Check fluid level. Fill as needed.
Check for leaks.
Install bumper, grill and cover.
Installation complete.
PACIFIC PERFORMANCE ENGINEERING
PPEpower.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>