HOLLYLAND M1 Wireless Lavalier Microphone User Manual

HOLLYLAND M1 Wireless Lavalier Microphone

Product Information

M1 Wireless Lavalier Microphone

The M1 Wireless Lavalier Microphone is a smart wireless microphone that provides professional-level recording output. It is perfect for webcasts, Vlog shooting Filming, program interviews,interview recordings, video teaching, and other occasions. The package includes a Microphone Transmitter, a Microphone Receiver, a Charging Case, a Type-C Charging Cable, a Cleaning Eraser, and a User’s Manual.

Package List

• Microphone Transmitter – 2pcs
• Microphone Receiver – 1pcs
• Charging Case – 1pcs
• Type-C Charging Cable – 1pcs
• Cleaning Eraser – 1pcs
• User’s Manual – 1pcs

Outline Picture and Function Description

The M1 Wireless Lavalier Microphone has a Receiver lighting charging port, Receiver light, Receiver plug, Microphone clip, Type-C charging port, Microphone light, Multi-function button, On/off button, Transmitter digital display, and Digital display of the charging case.

Instructions

1. Step 1: Plug the receiver into your device and you’ll see a flashing red light.
2. Step 2: Take out the microphone, the microphone will automatically power on, and the indicator light will be red and blue flash alternately.
3. Step 3: If the red light for the receiver and blue light for transmitter always keeps on, it means they are paired successfully. Then open the phone camera, live app, or other apps to start recording.

Microphone Transmitter

Functional status: The microphone transmitter
has different functional statuses which are Start up, Shutdown, Not connected, Connected, Noise reduction switch, Reverberation, Mute Charge, Full charge, and Low battery.

• Key operation: The microphone transmitter can be turned on by automatically powering on when taken out of the charging case.
• Lighting effect: The indicator light will flash red and blue alternately when starting up.
• Noise reduction switch: It is opened by default and can be turned on by clicking the multi-function button.
• Reverberation: It can be turned on and off by long-pressing the multi-function button.
• Mute Charge: The microphone can be muted by double-clicking the multi-function button MIC and can be restored by double-clicking it again.
• Full charge: The indicator light will turn off when the microphone transmitter is fully charged.
• Low battery: The indicator light will flash red once for 3 seconds.

Receiver

Functional status: The receiver has different functional statuses which are Start up, Shutdown, Not connected, and Connected.

• Lighting effect: The receiver’s indicator light will flash red when starting up and will remain steady red when it is connected.
• No button: The receiver can be powered on by plugging it into the phone port.
• Dial out the mobile phone port to power off:
  The receiver can be powered off by dialing out the mobile phone port.

Charging

For Microphone Transmitter:

1. Put the microphone transmitter into the fully charged
   microphone charging case to charge.

2. Alternatively, connect the microphone transmitter with the USB
   cable for charging.

3. The front red light on the microphone will turn on when it’s charging and will turn off when fully charged.

For Receiver

• The receiver itself doesn’t need to be charged.
• You can charge your smartphone through the receiver while you are recording and the mobile phone is in low-power status. Just plug the charging cable of your phone into the interface port of the receiver, and the mobile phone can be charged through the interface.

Product Description

Thank you for choosing our product. This product is a smart wireless microphone that provides profession-al-level recording output. Right now Plug and play, no APP is required.
Multiple uses: webcast, Vlog shooting Filming, program interviews, interview recordings, video teaching, and other occasions.

Product Outline Picture and Function Description

1. Receiver lighting charging port
2. Receiver light
3. Receiver plug
4. Microphone clip
5. Type-C charging port
6. Multi-function button
7. Multi-function button
8. On/off button
9. TYPE-C charging port
10. Transmitter digital display
11. Digital display of charging case

Indicator Light Description

Microphone transmitter

Charging

For Microphone Transmitter：

1. Put the microphone transmitter into the fully charged microphone charging case to charge.
2. Or connect the microphone transmitter with the USB cable for charging
3. When charging, the front red light on the microphone will be on and will go off when it is fully charged.

For Receiver：
The receiver itself has no need to be charged, but you can charge your smartphone through the receiver while you are recording and the mobile phone is in low-power status. Just plug the charging cable of your phone into the interface port of the receiver, and the mobile phone can be charged through the interface.

Cleaning
When the receiver is plugged into the mobile phone and there is poor contact, it may be caused by dirt and dust on the receiver plug. At this time, please use the cleaning eraser we provided to clean the receiver plug.

Technical specifications

Safety information

1. This device does not have a power adapter. When charging is required, please use a power adapter that has obtained the CCC certificate and complies with relevant standards.
2. Please use this equipment within the temperature range of 0°C-40°C, and store the equipment and accessories within the temperature range of-20°Cto +45°C. When the ambient temperature is too high or too low, it may cause equipment failure.
3. Do not expose the device to high temperatures or around heating devices, such as sunlight, heaters, microwave ovens, ovens or water heaters, etc.
4. When charging is complete or not charging, please disconnect the charger from the device and unplug the charger from the power.
5. The device is equipped with a non-removable built-in battery, please do not replace the battery yourself to avoid damage to the device.
6. Please dispose of this equipment, batteries, and related accessories following local regulations, and do not dispose of them as domestic waste.

Special Notice

1. Please make sure your device is unlocked and the red light is always on after the receiver is plugged into your smartphone.
2. Press the power switch of the microphone for about 1 second to turn it on. If the red light for the receiver and blue light for transmitter always keeps on, it means they are paired successfully.
3. To ensure sound quality, please put the microphone at a proper distance and do not put it too close to your mouth. If you want to hold the microphone in your hand, please hold the bottom of it and do not cover the windbreak on the top.
4. Any time when you see the red light & blue light flash alternately, it means the connection is failed and you need to restart.
5. Press and hold the power switch for about 3 seconds to power off the microphone.

Frequently Questions & Answers

Q: Does this mic require video recording on the phone, or can I use it for audio only through a different app?
A: This microphone works with the apps like a recorder, and camera on phone. It also works with apps TikTok,YouTube, and Facebook for video.

Q: How about the sound quality of this wireless microphone?
A: Wireless microphone uses an upgraded noise cancellation chip, designed to provide you with clearer audio.

Q: Can two microphones be used at the same time?
A: Yes, two microphones can be used simultaneously.

Q: Is the noise canceling mode turned on automatically?
A: Yes, the wireless microphone’s noise-canceling function is enabled by default. Upon removing the microphone from the charging case, it will automatically power on with noise-canceling activated.
If in a quiet indoor environment, you may press the multi-function button once to disable the noise reduction function.

Activation & Warranty

Please follow up on the user’s manual step-by-step and we will always stand by if you have any problems while recording.
If you have any other questions, please contact us.
Activate Permanent After-sales Service: Permanent replacement of damaged, defective, not upgraded, or missing items.
Please activate via email below within 15 days.

Our Customer Service Email:
aseller384@gmail.com

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>