bol B10H Digital Baby Scale User Guide

bol B10H Digital Baby Scale

Keep an accurate weight and height measurement of your child’s growth with this baby scale With a measuring capacity of 30 kg, this Scale is very suitable for babies, pets or something below 30kg.
The Hold function ensures that the weight remains on the display even when your baby is moving. The tare function decreases the weight of diapers or clothing to ensure accurate measurement.

In the package

• 1x scale
• 1x manual
• 2x AA batteries

Characteristics

1. High precision sensor
2. White letters blue LCD screen
3. Automatic Shutdown
4. Indication Of Overload
5. Unit conversion button
6. Reinforced HIPS Panel Support
7. Tare function
8. Weight Lock Display
9. Large Measuring Range: 10g-30000g
10. Length Measuring Range: Ocm-60cm

Technical data

• Product Name: Digital Baby Scale
• Power supply: 2 AAA batteries
• Measuring range: 10g-30000g
• Precision: 2g
• Measurement deviation: +0.3%
• Product Weight: 1.3 KG

Product Size

1. Size Of Scales: 650*320 45mm
2. Size Of Weighing Plate: 60 cm/23.5 inch
3. Size Of Package Box: 655*335 55mm

Buttons

1. ON/OFF Button:
   Press this button to turn on the scale and press to turn off position.
   “Tare” Button:
   Press “TARE” to clear the scale’s own weight before weighing
   Press “TARE” before placing clothes and blankets on the tray to remove the weight of the clothes.
   After display indicates “0” (as in the picture below), you can place the baby on the Scale to ensure an accurate measurement.

2. “Hold” Button: Hold Weight
   After the weight value has become stable, you can capture the weight on the screen by press this “HOLD” key. If you want to cancel the captured data, press the key again.

3. “UNIT” button: Select unit
   You can select the unit of weight on the display via the “UNIT” button measure different units.

Automatic Power Off Function (energy saving mode)
The product switches off automatically if the scale has not been used for about 2 minutes. (As the picture shows below)

Battery Energy Consumption

This product has a low energy consumption and is environmentally friendly. It comes with 2 AAA batteries. Tear the insulation film from the batteries and install them with the correct”+””and”-“side just before the product is used. When the low battery warning “LO” appears, please replace the batteries in time.

How to install batteries

1. Open the battery cover at the bottom of the scale.
2. When installing batteries.put the”-“side of the batteries in the box and then press the other”+” side into complete the installation.
   Note: Check which”+”and”-“side of the batteries are before placed. (Below is a photo of the installation).

How do you use the scale

1. Place the scale on a table, desk, or other flat surface. cannot be placed on the carpet.
2. Press ON/OFF” button to turn it on, and then presS “TARE” to keep the display shows “0°.
3. Then you can start to use the scale.
4. After The Display Shows “0”(as the picture),you can hold the baby on the scale. Press The “UNIT” button to select the unit change(g-kg-oz-lb:oz)
5. Place the baby with its full weight on the weighing plate. The Digital Display will weight of the baby show the unit your chosen raises.
6. Press the “HOLD” button to hold the weight display. Press press the button again to delete the retained data.
   Tips: if you use the scale without the weighing plate, keep the baby upright the scales and place the baby’s feet so that the weight is even is being devided.

Warning

1. Put the scale on a flat surface before use.
2. Do not place or use the product in a damp, very hot or very cold plaats.
3. Protect the product against damage from falling or strong shock, as this is a high precision electronic product.
4. Only use a soft cleaning cloth, but no chemical ones solutions nor water or other liquids to clean the product
5. This product is intended for measurement family data, cannot be used for professional measurements.
6. Remove the batteries if you are not going to use the product for a long time
7. Replace the batteries in time when the LCD display shows “L0”.
8. Please remove objects to avoid damage if the LCD display “ERR” shows (this indicates overload, the maximum weight is 30 kg).

For questions, support or waranty claims, you can contact us at anyüme

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>