Bol lP54 30000mAh Solar Power Bank User Manual

Bol lP54 30000mAh Solar Power Bank

Specifications:

• Capacity: 30000mAh
• IP Rating: IP54

Input

• Micro USB: DC 5V 2A Max
• Type-C: DC 5V 3A Max

Output

• USB Output 1,2: DC 5V 3.4A Max
• Type-C Output: DC 5V 3A Max
• LED Indicator for power status
• Solar charging indicator
• LED Lights
• Power button
• Solar panel
• Wireless charging capability

Collecting Solar Power:

To collect solar power, follow these steps:

1. Place the power bank in direct sunlight with the solar panel facing the sun.
2. The solar charging LED indicator will be green while charging and turns blue when fully charged.

Charging the Power Bank with an External Power Source:

To charge the power bank using a Micro USB or Type-C cable:

1. Connect the power bank to a charger using the provided cable.
2. Connect the charger to a power source to start charging automatically.

Charging Devices

To charge your devices with the power bank:

1. Connect your device to the power bank using the provided charging cable.
2. The power bank will start charging your device automatically.

Using the LED Flashlight
To operate the LED flashlight

1. Double press the power button to turn on the flashlight.
2. After using the flashlight mode, press once for caution light and again for SOS signal light.
3. To turn off the LED flashlight, double press the power button.

Note:
The full charging time is indicated by the 4 LED lights. Use the provided plug and cable for optimal results. The A-grade Li-polymer battery ensures a long product life. Charging may generate heat.

FAQ
Q: Can I charge multiple devices simultaneously?
A: The power bank has dual USB outputs, allowing you to charge two devices at once.

User Manual

Solar Power Bank
30000mAh IP54
Thank you for purchasing our solar power bank. Please read the manual carefully before use and keep it for reference in the future.

Overview

1 . USB Output 1,2: DC 5V 3A Max 2. Micro USB Input: DC SV 2A Max 3. Type-C Output: DC 5V 3A Max / Input: DC 5V/3A Max 4. LED Indicators for power status 5. Solar charging indicator 6. LED Lights 7. Power button 8, Solar panel 9. Wireless charging

Features

• Wireless Charger output: Qi Wireless Charging Transmitter
• IP54: Rainproof
• Multi-Functional LED Lights: The LED flashlight is a perfect outdoor companion. With lighting, flash and SOS lighting modes, it leads you through darkness and emergencies as lifesaver.
• Dual use output port,1 Type-c output port: The power bank is able to charge three devices simultaneously.
• Safe Use: Short circuit protection, over-discharging protection and over-charging protection are designed in PCBA.

Qi Wireless Charging: Qi wireless charging standard, support all devices which built-in wireless charging function. (If your mobile phones do not support wireless charging, you need to use an external wireless receiver)
Accessory List: User Manual, USB-CCharging Cable, QC 3.0 plug, Power Bank.

Instructions

HOW TO OiARGE THE POWER BANK?
To collect and store solar power to the power bank’s internal battery:

• Place the power bank in direct sunlight: make sure the embedded solar panel is positioned towards the sun.
• The solar changring LED indicator light is green while charging by the sunlight and turns blue when the power bank is fully charged.

Note: Kindly note that the solar panel is designed for emergency charging. This means it should not be the main way ID charge your power bank. Placing the solar panel in direct sunlight too often can damage the panel.
CHARGING THE POWER BANK WITH AN EXTERNAL POWER SOURCE: Micro USB/ Type·C Charging
Connect the power bank to a charger with the provided type-C cable or your own Micro USB cable, then connect the charger to a power source. The power bank will start charging automatically. It’s possible to use other chargers with an output voltage between SV-5.5V. Note: It is not possible to use 2 inputs at the same time. You can’t charge using an Micro USB and Type·C Input simultaneously.

Note: The power bank needs to be fully charged if you wish to utilize both use ports and charge three devices simultaneously. The 4 LED indicators will be on when the power bank is fully charged.

HOW DO YOU CHARGE YOUR DEVICES?
Connect the power bank to your device with the provided charging cable, it will start to charge your device automati· cally. The power bank will turn off after 35 seconds if no device is connected.

OPERATING THE LED FLASHLIGHT

• To turn on the emergency LED flashlight: Double press the power button.
• To turn on the caution Light: After the flashlight mode, press the power button once to switch the caution light on.
• To turn on SOS Signal Light: After caution light mode press the power button once to switch the SOS signal light.
• To turn off the LED Flashlight: Double press the power button.

NOTES

• The full charging time is only for your reference, please refer to the 4 LED lights to be certain the power bank is charged .
• High quality guarantee, the A-grade Li-polymer battery ensures a long life product.
• Please use the plug and cable delivered with this product for the best results.
• Charging will heat up the power bank. If it get’s too hot, please stop changing. Extremely hot? Contact us.
• Please store this power bank in a cool and dry place. If you are not using the product for a longer period, fully charge the power bank at least every 6 months.
• It is possible to charge the power bank with a 5V·2A changer, instead of the QC 3.0 charger that comes with the product. The QC 3.0 changer will adjust it’s voltage per device.
• Please do not store this product with other sharp objects. Scratches can influence it’s functionalities.
• Please be careful! charging the device in you car. It can get extra hot and might damage the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>