Bol com Easy Installation Strip User Guide
- June 1, 2024
- bol com
Table of Contents
Bol com Easy Installation Strip
Product Information
- Step-by-Step Instructions
- Cut to Desired Length
- A strip is cut with scissors to the desired length for installation.
- Clean the Door’s Bottom Surface
- An illustration of a hand cleaning the bottom surface of a door indicates that the surface should be clean before proceeding with installation.
- Remove Adhesive Tape
- The backing of the adhesive tape is being peeled off to expose the sticky side.
- Apply the Strip
- The strip with the adhesive side exposed is being applied to the bottom of the door.
Specifications
| Step | Detail |
|---|---|
| 1 | Cut the strip to the required length using scissors. |
| 2 | Ensure the door bottom is clean for the adhesive to stick properly. |
| 3 | Peel off the protective backing to reveal the adhesive side of the strip. |
| 4 | Stick the adhesive strip to the bottom of the door to complete the |
installation.
FAQs
What tools do I need for installation?
You will need a pair of scissors to cut the strip to the desired length.
How do I ensure the strip adheres properly?
Make sure the door surface is clean and free of debris before applying the strip.
Is the strip suitable for all types of doors?
The strip is generally versatile, but check compatibility with your specific door type and material.
EASY INSTALLATION
- Cut to Desired Length
- Clean the Door’s Bottom Surface
- Remove Adhesive Tape
- Apply the strip
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>