Palmer River Series 2 Channel Media DI Passive Box User Manual
- June 10, 2024
- Palmer
Table of Contents
- Palmer River Series 2 Channel Media DI Passive Box
- Product Information
- Features
- Product Technical Specifications
- Product Usage Instructions
- Additional Information
- RIVER SERIES
- INTENDED USE
- SAFETY INSTRUCTIONS
- INTRODUCTION
- CONNECTIONS AND OPERATING ELEMENTS
- WIRING EXAMPLES
- TECHNICAL DATA
- DISPOSAL
- BATTERIES
- MANUFACTURER’S DECLARATIONS
- FCC STATEMENT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Palmer River Series 2 Channel Media DI Passive Box
Product Information
The River Series 2-Channel Media DI-Box is a passive device designed to convert unbalanced signals to balanced signals with no ground loop hum. It is suitable for use in various audio applications, including recording studios, live performances, and sound systems.
Features
- 2-channel media DI-box
- Passive design
- Converts unbalanced signals to balanced signals
- No ground loop hum
- Suitable for various audio applications
Product Technical Specifications
- Input: Unbalanced
- Output: Balanced
- Level: -10 dB
Product Usage Instructions
Connections
The River Series DI-Box has two channels. Connect the unbalanced signal source to the input of the DI-Box using a standard 1/4″ TS instrument cable. Connect the balanced output of the DI-Box to your audio system or device using an XLR cable.
- Unbalanced Signal:
- Balanced Signal:
Ground Loop Hum
The River Series DI-Box is designed to eliminate ground loop hum. However, if you still experience ground loop hum, try lifting the ground on the XLR cable connected to the output of the DI-Box. This can be done using a ground lift adapter or by connecting pin 1 and pin 3 together at the XLR plug end of the cable.
Additional Information
For more technical details and information on using the River Series DI-Box, please refer to the product user manual provided.
RIVER SERIES
Let your signals flow, naturally and powerfully like a river! The River Series embodies this claim down to the last detail: featuring high-precision circuits, designed by our award-winning engineers to ensure your sound reaches its destination – the hearts of your listeners.
That’s exactly what Palmer® stands for. We have been manufacturing audio tools for professional use on stage, in broadcasting and in the studio since 1980. Musicians and sound engineers around the world value our solutions developed in Germany for their unhindered signal flow and pure sound – as crystal clear and vibrant as water! So what was more logical than naming the River Series models after German rivers? On the map of Germany you can see where the Naab flows: 197 kilometres through Bavaria. Thank you for purchasing the naab! We hope you enjoy this piece of German engineering. Be true to your sound!
Yours, the Palmer Team
INTENDED USE
This product is a device for event technology, as well as studio, TV and broadcast! This product has been developed for professional use in the fields of event technology, studio, TV and broadcast. It is not suitable for household use! Furthermore, this product is only intended for qualified users with specialist knowledge of event technology, as well as studio, TV and broadcast! Use of the product outside the specified technical data and operating conditions is considered inappropriate! Liability for damage and third-party damage to persons and property due to inappropriate use is excluded!
The product is not suitable for:
- Persons (including children) with limited physical, sensory or mental abilities or lack of experience and knowledge.
- Children (children must be instructed not to play with the device).
SAFETY INSTRUCTIONS
- Please read these instructions carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Use the device in the prescribed manner only.
- Do not open the device and do not perform any modifications.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS AND PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!
INTRODUCTION
Equipped with two 6.3 mm jack inputs, two cinch inputs and a stereo mini jack input, the naab Media DI box is designed for connecting a variety of playback devices (e.g. notebook, tablet, CD player) to mixing consoles and the like. The balanced line outputs are equipped with male XLR sockets. There is galvanic isolation between input and output thanks to high-quality transformers. With the help of the ground lift switch for disconnecting the ground connection of input and output, hum loops and other interference signals that can be caused by computers, for example, are effectively eliminated. The Media DI box can be switched to mono if required. The mono-sum signal is then available at both XLR output sockets at the same time. The Media DI box can also be used as a split box in this way. Audio signals can also be transmitted hum-free over long cable runs with the help of the Media DI box.
CONNECTIONS AND OPERATING ELEMENTS
- STEREO
- Unbalanced stereo line input with 3.5 mm mini jack socket. Use a shielded stereo audio cable to connect, for example, a notebook to the Media DI box.
- TRS LEFT / RIGHT
- Line inputs with 6.3 mm jack sockets suitable for both unbalanced and balanced cabling. Use shielded audiocables, for example, to connect a submixer to the Media DI box.
- RCA LEFT / RIGHT
- Line inputs with cinch sockets. Use shielded audio cables, for example, to connect a CD player to the Media DI box.
- OUTPUT LEFT / RIGHT
- Balanced stereo line output with two male 3-pin XLR sockets. Use shielded audio cables to connect the Media DI box to a balanced stereo input of a mixing console or audio interface.
- STEREO / MONO
- MONO: Move the switch to the depressed MONO position to sum an incoming stereo signal to mono and output it at both XLR output jacks simultaneously. With the help of this function, the Media DI box can also be used as a split box with two galvanically separated outputs.
- STEREO: When STEREO is not pressed, the LEFT input signal is output at the LEFT output and the RIGHT input signal is output at the RIGHT output.
- LIFT / GND
- Switch for disconnecting the ground connection from the input and output (ground lift). In the non-pressed position, the ground connection is disconnected; the connection is established when the switch is pressed. The ability to prevent a humming loop using the ground lift switch depends on the grounding of the connected device. It is therefore possible that the switch is able to effectively reduce or eliminate humming when it is either up or down, depending on circumstances.
- GND SOFT / HARDSOFT:
- The ground connection of input and output is via an RC element.
HARD: There is a direct ground connection between input and output.
CAUTION: Connecting signal cables can cause considerable noise. Please make sure that the input channels of mixing console and audio interfaces, etc. are muted when plugged in. Otherwise, noise levels may cause damage.
NOTE: Strong magnetic fields can cause humming. Therefore, do not position the DI Box near strong magnetic fields (e.g. mains transformer).
WIRING EXAMPLES
TECHNICAL DATA
GENERAL
| Product number | PNAAB |
|---|---|
| Product type | Line Isolator |
| No. of channels | 2 |
| Type | passive |
| Transformer isolated | yes |
| No. of inputs | 2 |
| Input type | unbalanced |
| Input connections | Cinch, 6.3 mm jack, 3.5 mm stereo jack |
| No. of outputs | 2 |
| Output type | balanced |
| Output connections | XLR |
| Ground/lift switch | yes |
| Additional functions | Mono summing switch |
| Housing | Aluminium continuous casting |
| Dimensions (H/W/D) | 140 x 50 x 98 mm |
| Weight | 0.555 kg |
| Ambient temperature for operation | -20°C…70°C |
| Relative air humidity | <80 %, non-condensing |
| Included accessories | Rubber feet, inscription label |
| AUDIO | |
| Max. Input level (< 1% THD, 20 Hz) | +14 dBu |
| Max. Input level (< 1% THD, 1 kHz) | +32 dBu |
| Frequency response (±2dB, relative 1kHz) | 5 Hz – 50 kHz |
| Input impedance (1 kHz) | 10 kΩ |
| Output impedance (1 kHz) | 80 Ω |
| THD (30 Hz, +4 dBu, unity, unweighted) | < 0.03 % |
| THD (1 kHz, +4 dBu, unity, unweighted) | < 0.0008 % |
| IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu) | < 0.002 % |
| Transformer ratio | 3,16:1 |
All measurements were performed with a generator with 600 Ω output impedance and 1 kΩ balanced load.
- All measurements were performed with a generator with 600 Ω output impedance and 1 kΩ balanced load.
DISPOSAL
PACKAGING
- Packaging can be fed into the reusable material cycle using the usual disposal methods.
- Please separate the packaging in accordance with disposal laws and recycling regulations in your country.
DEVICE
- This device is subject to the European Waste Electrical and Electronic Equipment Directive in the currently valid version. WEEE Waste Electrical and Electronic Equipment Directive. Old appliances do not belong in household waste. The old device must be disposed of via an approved disposal company or a municipal disposal facility. Please observe the applicable regulations in your country!
- Observe all disposal laws applicable in your country.
- As a private customer, you can obtain information on environmentally friendly disposal options from the seller of the product or the appropriate regional authorities.
BATTERIES
- Batteries should not be disposed of in household waste. Batteries and rechargeable batteries must be disposed of via an approved disposal company or a municipal disposal facility.
- Observe all disposal laws applicable in your country.
- As a private customer, you can obtain information on environmentally friendly disposal options from the seller of the product or through the relevant regional authorities.
- Devices with batteries that cannot be removed by the user must be taken to a collection point for electrical appliances.
MANUFACTURER’S DECLARATIONS
Manufacturer’s warranty & limitation of liability
- Adam Hall GmbH
- Adam-Hall-Str. 1 61627, Neu-Anspach, Germany
- Email: Info@adamhall.com
- +49 (0)6081 / 9419-0.
- Our current warranty conditions and limitation of liability can be found at: https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declarations-PALMER_DE_EN_ES_FR.pdf
Contact your distribution partner for service.
CE CONFORMITY
Adam Hall GmbH hereby confirm that this product meets the following guidelines (where applicable):
- Low-Voltage Directive (2014/35/EU)
- EMC Directive (2014/30/EU)
- RoHS (2011/65/EU)
- RED (2014/53/EU)
EC DECLARATION OF CONFORMITY
Declarations of conformity for products that are subject to the LVD, EMC, RoHS Directives, can be requested at info@adamhall.com. Declarations of conformity for products that are subject to the RED Directive can be downloaded at www.adamhall.com/compliance/.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation
UKCA- CONFORMITY
Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable) Electrical Equipment (Safety) Regulations 2016 Electromagnetic Compatibility Regulations 2016 (SI 2016/1091) The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 (SI 2012/3032) Radio Equipment Regulations 201 7(SI 2016/2015)
UKCA- DECLARATION OF CONFORMITY
Products that are subject to Electrical Equipment(Safety) Regulation 2016, EMC Regulation 2016 or RoHS Regulation can be requested at info@adamhall.com. Products that are subject to the Radio Equipments Regulations 2017 (SI2017/1206) can be downloaded from www.adamhall.com/compliance/
SUBJECT TO MISPRINTS AND ERRORS, AS WELL AS TECHNICAL OR OTHER MODIFICATIONS!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>