TESLA BS102B Bathroom Scale User Manual
- June 4, 2024
- Tesla
Table of Contents
TESLA BS102B Bathroom Scale
SPECIFICATIONS
- Capacity:180kg/396lb
- Unit: kg/lb
- Power: 2XAAA battery
- Turn on auto
- Auto off in 10 seconds
- Low battery display: “Lo”
- Overweight display: “oL”
INSTRUCTIONS
- Remove the insulation film from the back of the scale near the battery compartment prior to operation.
- Place the scale on a plane and hard surface prior to weighting
- Before using the scale it is necessary to let it be calibrated and when the display turns off you can measure yourself.
- Step on the scale, balance your weight evenly and wait until the display reads your weight. Your weight will flash on the readout for 10 seconds.
- Press the button near the battery box and you can choose the different unit: kg/lb
- Replace the battery immediately when you see the Lo battery indicator.
Attention
- Do not leave any object on the scale when not in use.
- Keep the scale surface and your feet drying when weighting.
- Make sure you stand in the center of the scale to avoid tipping.
- Avoid dropping or hitting the scale.
- Wipe scale surface with a clean dry cloth if need clean.
- Do not wash the scale with water, the scales mechanism can be damaged if immersed in water.
Disposal
Do not Dispose of batteries with house-hold waste! Batteries and packaging
should be sorted for environmentally friendly recycling.
Only for EU countries: according to the Directive 2006/66/EC, defective or used batteries, must be collects separately and disposed of in an environmentally correct manner.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>