RAIN HARVESTING TATO73 Mozzie Stoppas High Flow Anaconda Removable Screen Installation Guide

RAIN HARVESTING TATO73 Mozzie Stoppas High Flow Anaconda Removable Screen

Mozzie Stoppas High Flow Anaconda

The Mozzie Stoppas High Flow Anaconda is a product designed to keep mosquitoes and other pests out of your tank while maximizing the flow through your overflow. Over time, mosquito-proof screens can become blocked due to their small aperture. If not cleaned,this can lead to the overflow not functioning properly and water,instead, overflowing through the tank inlet. The mesh area on the Mozzie Stoppa High Flow Anaconda is much larger than a standard Mozzie Stoppa, allowing more water to flow through, even if debris has built up on the screen. Simply put, it performs better, for longer.

Product Details

• Code: TATO73, TATO74, TATO173, TATO174
• Size: 90mm, 100mm
• Country: Australia, USA

Installation Guide

1. Select an installation point for your Mozzie Stoppas High Flow Anaconda w/ Removable Screen. As it will require regular maintenance, we recommend installing it in a position that allows for easy access and cleaning. In most cases, the best position will be directly into the overflow outlet of your tank with the handle pointing upwards. Also, ensure that the installation position allows the handle to be removed fully.

2. If necessary, measure and remove a section of the pipe leaving a gap between your overflow outlet and overflow pipe. For a Mozzie Stoppas High Flow Anaconda w/ Removable Screen 90mm/3, we recommend removing approximately 128mm. And for the 100mm/4 version, we recommend removing approximately 216mm. Once the pipes are cut, ensure the edges are clean and smooth.

3. Prior to gluing, remove the Mozzie Stoppas High Flow Anaconda mesh cartridge, so that there is no chance of glue getting on the mesh.

4. Glue the Mozzie Stoppas High Flow Anaconda body into the provided Max Flow adaptors. Ideally, the indicators on the adaptors should line up with the corresponding indicators on the Mozzie Stoppas High Flow Anaconda body.
   NOTE: The taper of the Max Flow adaptors should allow water to flow unrestricted through the Mozzie Stoppa. See the dimensional drawing and product photo for reference.

5. Use solvent weld glue to install the Mozzie Stoppas High Flow Anaconda into the gap you made in Step 2, between your overflow outlet and overflow pipe.

6. Once the solvent weld glue has dried, re-install your mesh cartridge into the Mozzie Stoppas High Flow Anaconda body to secure your system and prevent pests from entering your tank.

Tools/Materials you may require

• Tape measure
• Marker pen
• Saw
• Solvent weld glue (optional)

PRODUCT DETAILSs

Keep mosquitoes and other pests out of your tank and maximise the flow through your overflow.
Over time, mosquito-proof screens can become blocked due to their small aperture. If not cleaned, this can lead to the overflow not functioning properly and water, instead, overflowing through the tank inlet.
The mesh area on the Mozzie Stoppa High FlowAnaconda is much larger than a standard Mozzie Stoppa, allowing more water to flow through, even if debris has built up on the screen. Simply put, it performs better, for longer.

Installation

WHAT S IN THE BOX?

• Mozzie Stoppas High Flow Anaconda
• Max Flow adaptors
• Socket to Socket adaptor

TOOLS/MATERIALS YOU MAY REQUIRE

• Tape measure
• Marker pen
• Saw
• Solvent weld glue (optional)

Mozzie Stoppas High Flow Anaconda w/ Removable Screen

1. Select an installation point for your Mozzie Stoppas High Flow Anaconda w/ Removable Screen. As it will require regular maintenance, we recommend installing in a position that allows for easy access and cleaning. In most cases, the best position will be directly into the overflow outlet of your tank with the handle pointing upwards. Also ensure that the installation position allows the handle to be removed fully.

2. If necessary, measure and remove a section of pipe leaving a gap between your overflow outlet and overflow pipe. For a Mozzie Stoppas High Flow Anaconda w/ Removable Screen 90mm/ 3″, we recommend removing approxit ately 128mm. And for the 100mm/ 4″ version, we recommend removing approximately 216mm. Once the pipes are cut, ensure the edges are clean and smooth.

3. Prior to gluing, remove the Mozzie Stoppas High Flow Anaconda mesh cartridge, so that there is no chance of glue getting on the mesh.

4. Glue the Mozzie Stoppas High Flow Anaconda body into the provided Max Flow adaptors. ldeally the indicators on the adaptors should line up with the corresponding indicators on the Mozzie Stoppas High Flow Anaconda body
   NOTE:
   The taper of the Max Flow adaptors should allow water to flow unrestricted through the Mozzie Stoppa. See the dimensional drawing and product photo for reference.

5. Use solvent weld glue to install the Mozzie Stoppas High Flow Anaconda into the gap you made in Step 2, between your overflow outlet and overflow pipe.

6. Once the solvent weld glue has dried, re-install your mesh cartridge into the Mozzie Stoppas High Flow Anaconda body to secure your system and prevent pests from entering your tank.

Product Specifications

Mozzie Stoppas High Flow Anaconda w/ Removable Screen

All dimensions are in mm unless otherwise stated.

Fitting guide:

• F = Female / Socket Fitting
• M = Male / Spigot Fitting (Pipe size)
• IP = In-Pipe Fitting

Maintenance

Your Mozzie Stoppas High Flow Anaconda w/ Removable Screen is designed to make maintenance and cleaning easy. Remove the mesh cartridge by pulling the handle directly out of the body. Replace the mesh cartridge immediately after cleaning by firmly inserting it back into the corresponding slot in the body so it continues to form a barrier against mosquitoes, frogs and pests.
Periodically inspect the mesh cartridge o-ring to ensure that the system seal is still performing optimally.

Supported

A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help.
With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.

COMPLIANCE
AS/NZS 4020:2005 Testing of products for use in contact with drinking water

DISCLAIMER This product specification is not a complete guide to product usage. Further information is availlable from Rain Harvesting Pty Ltd and from the Installation and Operating Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. O Rain Harvesting Pty Ltd

For more information or to find out how we can help, just give us a call on
+617 3248 9600
Or visit our website at
rainharvesting.com

References

• Cleaner Water. More of it. | Rain Harvesting by BMCo US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>