QAZQA 105504 Zuzanna SL Black Gold Smoke Instruction Manual

QAZQA 105504 Zuzanna SL Black Gold Smoke

Product Information

Specifications

• Input: AC220-240V~50Hz

• IP Rating: IP20

• Model: Zuzanna SL

• Color: Black Gold Smoke

• Available Models:

  • Zunanna SL 3 Black Gold Smoke Long 105504
  • Zunanna SL 4 Black Gold Smoke Long 105505
  • Zunanna SL 3 Black Gold Smoke Round 105510

• Dimensions:

  • Long Models: 21cm x 12cm
  • Round Model: 12cm x 21cm x 14cm

• Required Bulbs:

  • 3xE14 (excl. bulb) for Long Models
  • 4xE14 (excl. bulb) for Zunanna SL 4 Black Gold Smoke Long
    105505

• Manufacturer:

  • FittinQ B.V. – Smaragdweg 52, 5527 LB Hapert, The Netherlands
  • FittinQ LTD – 55 Baker Street, London, W1U 7EU United Kingdom

• Website: www.qazqa.nl

Product Usage Instructions

Installation
To install the Zuzanna SL Black Gold Smoke light fixture, follow these steps:

1. Ensure that the power supply is turned off.
2. Choose the desired location for the fixture.
3. Securely mount the fixture on the ceiling or wall using appropriate screws and anchors.
4. Connect the electrical wires to the corresponding terminals. Make sure to follow proper electrical wiring practices and consult a professional if necessary.
5. Attach the decorative elements (if applicable) to the fixture according to the provided instructions.

Bulb Replacement
To replace the bulbs in your Zuzanna SL light fixture, follow these steps:

1. Turn off the power supply to the fixture.
2. Allow the bulbs to cool down if they were recently in use.
3. Gently twist and remove the old bulbs from their sockets.
4. Insert new bulbs of the correct type and wattage into the sockets.
5. Make sure the bulbs are securely in place.
6. Turn on the power supply and test the new bulbs.

FAQ

Can I use LED bulbs with this fixture?
Yes, you can use LED bulbs as long as they have an E14 base and are compatible with the voltage rating of AC220-240V~50Hz.

How do I clean the fixture?
To clean the Zuzanna SL Black Gold Smoke light fixture, follow these steps:

1. Turn off the power supply to the fixture.
2. Use a soft, dry cloth to gently wipe the surface of the fixture.
3. Avoid using abrasive cleaners or solvents that may damage the finish.
4. If necessary, you can lightly dampen the cloth with water or a mild soap solution.
5. Allow the fixture to dry completely before turning on the power supply.

Can I adjust the height of the fixture?
The height of the Zuzanna SL Black Gold Smoke light fixture can be adjusted during installation. However, please refer to the specific instructions provided with your model for detailed information on adjusting the height.

Safety Precautions

Zuzanna SL Black Gold Smoke

SAFETY INSTRUCTION

• Please study the instruction manual and below information carefully before installing or using this product.
• Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.

Meaning of symbols

• This icon indicates the level of water-proof and dust-proof
• Protection Class I: the fitting must be earthed
• Protection Class II: the fitting is doubled insulated and does not require earthing
• Protection Class Ill: the fitting is low voltage
• Minimum distance from lighted objects (meters)
• The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
• The armature is designed to work only with the indicated voltage. Different items require different working voltage.
• The luminaire can be used in combination with a dimmer
• The luminaire can be dimmed by wall switch
• The reference light angle and light space of the luminaire
• This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

Take note of the symbols when connecting wires

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl

FittinQ LTD
55 Baker Street,
London, W1U 7EU
United Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>